(features->type == WACOM_21UX2))
return 1;
+ /* Range Report */
+ if ((data[1] & 0xfe) == 0x20) {
+ input_report_key(input, BTN_TOUCH, 0);
+ input_report_abs(input, ABS_PRESSURE, 0);
+ input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max);
+ }
+
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if (features->type >= INTUOS4S && features->type <= WACOM_24HD) {
+ if (features->type >= INTUOS4S && features->type <= CINTIQ_HYBRID) {
t = (t << 1) | (data[1] & 1);
}
input_report_abs(input, ABS_PRESSURE, t);
} else {
input_report_abs(input, ABS_MISC, 0);
}
- } else if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+ } else if (features->type == CINTIQ_HYBRID) {
+ /*
+ * Do not send hardware buttons under Android. They
+ * are already sent to the system through GPIO (and
+ * have different meaning).
+ */
+ input_report_key(input, BTN_1, (data[4] & 0x01));
+ input_report_key(input, BTN_2, (data[4] & 0x02));
+ input_report_key(input, BTN_3, (data[4] & 0x04));
+ input_report_key(input, BTN_4, (data[4] & 0x08));
+
+ input_report_key(input, BTN_5, (data[4] & 0x10)); /* Right */
+ input_report_key(input, BTN_6, (data[4] & 0x20)); /* Up */
+ input_report_key(input, BTN_7, (data[4] & 0x40)); /* Left */
+ input_report_key(input, BTN_8, (data[4] & 0x80)); /* Down */
+ input_report_key(input, BTN_0, (data[3] & 0x01)); /* Center */
+ } else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
int i;
/* Touch ring mode switch has no capacitive sensor */
input_report_key(input, BTN_0, (data[3] & 0x01));
/*
- * ExpressKeys on Intuos5 have a capacitive sensor in
+ * ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in
* addition to the mechanical switch. Switch data is
* stored in data[4], capacitive data in data[5].
*/
features->type == INTUOS4 ||
features->type == INTUOS4S ||
features->type == INTUOS5 ||
- features->type == INTUOS5S)) {
+ features->type == INTUOS5S ||
+ features->type == INTUOSPM ||
+ features->type == INTUOSPS)) {
return 0;
}
} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
/* I4 mouse */
- if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
- (features->type >= INTUOS5S && features->type <= INTUOS5L)) {
+ if (features->type >= INTUOS4S && features->type <= INTUOSPL) {
input_report_key(input, BTN_LEFT, data[6] & 0x01);
input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
input_report_key(input, BTN_RIGHT, data[6] & 0x04);
}
}
} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
- features->type == INTUOS4L || features->type == INTUOS5L) &&
+ features->type == INTUOS4L || features->type == INTUOS5L ||
+ features->type == INTUOSPL) &&
wacom->tool[idx] == BTN_TOOL_LENS) {
/* Lens cursor packets */
input_report_key(input, BTN_LEFT, data[8] & 0x01);
static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
{
+ struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->input;
bool touch = data[1] & 0x80;
int slot = input_mt_get_slot_by_key(input, data[0]);
if (touch) {
int x = (data[2] << 4) | (data[4] >> 4);
int y = (data[3] << 4) | (data[4] & 0x0f);
- int a = data[5];
+ int width, height;
- // "a" is a scaled-down area which we assume is roughly
- // circular and which can be described as: a=(pi*r^2)/C.
- int x_res = input_abs_get_res(input, ABS_X);
- int y_res = input_abs_get_res(input, ABS_Y);
- int width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
- int height = width * y_res / x_res;
+ if (features->type >= INTUOSPS && features->type <= INTUOSPL) {
+ width = data[5];
+ height = data[6];
+ } else {
+ /*
+ * "a" is a scaled-down area which we assume is
+ * roughly circular and which can be described as:
+ * a=(pi*r^2)/C.
+ */
+ int a = data[5];
+ int x_res = input_abs_get_res(input, ABS_X);
+ int y_res = input_abs_get_res(input, ABS_Y);
+ width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
+ height = width * y_res / x_res;
+ }
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
case WACOM_22HD:
case WACOM_24HD:
case DTK:
+ case CINTIQ_HYBRID:
sync = wacom_intuos_irq(wacom_wac);
break;
case INTUOS5S:
case INTUOS5:
case INTUOS5L:
+ case INTUOSPS:
+ case INTUOSPM:
+ case INTUOSPL:
if (len == WACOM_PKGLEN_BBTOUCH3)
sync = wacom_bpt3_touch(wacom_wac);
else
/* these device have multiple inputs */
if (features->type >= WIRELESS ||
- (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
+ (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
(features->oVid && features->oPid))
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
case INTUOS5:
case INTUOS5L:
+ case INTUOSPM:
+ case INTUOSPL:
if (features->device_type == BTN_TOOL_PEN) {
__set_bit(BTN_7, input_dev->keybit);
__set_bit(BTN_8, input_dev->keybit);
/* fall through */
case INTUOS5S:
+ case INTUOSPS:
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (features->device_type == BTN_TOOL_PEN) {
0, 0);
}
break;
+
+ case CINTIQ_HYBRID:
+ __set_bit(BTN_1, input_dev->keybit);
+ __set_bit(BTN_2, input_dev->keybit);
+ __set_bit(BTN_3, input_dev->keybit);
+ __set_bit(BTN_4, input_dev->keybit);
+
+ __set_bit(BTN_5, input_dev->keybit);
+ __set_bit(BTN_6, input_dev->keybit);
+ __set_bit(BTN_7, input_dev->keybit);
+ __set_bit(BTN_8, input_dev->keybit);
+ __set_bit(BTN_0, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
+ wacom_setup_cintiq(wacom_wac);
+ break;
}
return 0;
}
static const struct wacom_features wacom_features_0x2A =
{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047,
63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x314 =
+ { "Wacom Intuos Pro S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047,
+ 63, INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .touch_max = 16 };
+static const struct wacom_features wacom_features_0x315 =
+ { "Wacom Intuos Pro M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047,
+ 63, INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .touch_max = 16 };
+static const struct wacom_features wacom_features_0x317 =
+ { "Wacom Intuos Pro L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047,
+ 63, INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .touch_max = 16 };
static const struct wacom_features wacom_features_0xF4 =
{ "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0x6004 =
{ "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x0307 =
+ { "Wacom ISDv5 307", WACOM_PKGLEN_INTUOS, 59552, 33848, 2047,
+ 63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
+static const struct wacom_features wacom_features_0x0309 =
+ { "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10 };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
{ USB_DEVICE_WACOM(0x300) },
{ USB_DEVICE_WACOM(0x301) },
{ USB_DEVICE_WACOM(0x304) },
+ { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
+ { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
+ { USB_DEVICE_DETAILED(0x317, USB_CLASS_HID, 0, 0) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_WACOM(0xF8) },
{ USB_DEVICE_DETAILED(0xF6, USB_CLASS_HID, 0, 0) },
{ USB_DEVICE_WACOM(0xFA) },
+ { USB_DEVICE_WACOM(0x0307) },
+ { USB_DEVICE_DETAILED(0x0309, USB_CLASS_HID, 0, 0) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }
};
projects / cascardo / linux.git / blobdiff