can: c_can: add hwinit support for non-TI devices

[cascardo/linux.git] / drivers / net / can / c_can / c_can_platform.c

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 0db3625..824108c 100644 (file)
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -40,6 +40,7 @@
 #define CAN_RAMINIT_START_MASK(i)      (0x001 << (i))
 #define CAN_RAMINIT_DONE_MASK(i)       (0x100 << (i))
 #define CAN_RAMINIT_ALL_MASK(i)                (0x101 << (i))
+#define DCAN_RAM_INIT_BIT              (1 << 3)
 static DEFINE_SPINLOCK(raminit_lock);
 /*
  * 16-bit c_can registers can be arranged differently in the memory
@@ -80,7 +81,7 @@ static void c_can_hw_raminit_wait_ti(const struct c_can_priv *priv, u32 mask,
                udelay(1);
 }
 
-static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
 {
        u32 mask = CAN_RAMINIT_ALL_MASK(priv->instance);
        u32 ctrl;
@@ -96,14 +97,14 @@ static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
        ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
        writel(ctrl, priv->raminit_ctrlreg);
        ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
-       c_can_hw_raminit_wait(priv, ctrl, mask);
+       c_can_hw_raminit_wait_ti(priv, ctrl, mask);
 
        if (enable) {
                /* Set start bit and wait for the done bit. */
                ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
                writel(ctrl, priv->raminit_ctrlreg);
                ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
-               c_can_hw_raminit_wait(priv, ctrl, mask);
+               c_can_hw_raminit_wait_ti(priv, ctrl, mask);
        }
        spin_unlock(&raminit_lock);
 }
@@ -136,6 +137,28 @@ static void d_can_plat_write_reg32(const struct c_can_priv *priv, enum reg index
        writel(val, priv->base + priv->regs[index]);
 }
 
+static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask)
+{
+       while (priv->read_reg32(priv, C_CAN_FUNCTION_REG) & mask)
+               udelay(1);
+}
+
+static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+{
+       u32 ctrl;
+
+       ctrl = priv->read_reg32(priv, C_CAN_FUNCTION_REG);
+       ctrl &= ~DCAN_RAM_INIT_BIT;
+       priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+       c_can_hw_raminit_wait(priv, ctrl);
+
+       if (enable) {
+               ctrl |= DCAN_RAM_INIT_BIT;
+               priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+               c_can_hw_raminit_wait(priv, ctrl);
+       }
+}
+
 static struct platform_device_id c_can_id_table[] = {
        [BOSCH_C_CAN_PLATFORM] = {
                .name = KBUILD_MODNAME,
@@ -255,11 +278,20 @@ static int c_can_plat_probe(struct platform_device *pdev)
                        priv->instance = pdev->id;
 
                res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+               /* Not all D_CAN modules have a separate register for the D_CAN
+                * RAM initialization. Use default RAM init bit in D_CAN module
+                * if not specified in DT.
+                */
+               if (!res) {
+                       priv->raminit = c_can_hw_raminit;
+                       break;
+               }
+
                priv->raminit_ctrlreg = devm_ioremap_resource(&pdev->dev, res);
                if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0)
                        dev_info(&pdev->dev, "control memory is not used for raminit\n");
                else
-                       priv->raminit = c_can_hw_raminit;
+                       priv->raminit = c_can_hw_raminit_ti;
                break;
        default:
                ret = -EINVAL;