======================================================================*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
-#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/log2.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include "../8390.h"
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
static int pcnet_open(struct net_device *dev);
static int pcnet_close(struct net_device *dev);
static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static const struct ethtool_ops netdev_ethtool_ops;
static irqreturn_t ei_irq_wrapper(int irq, void *dev_id);
static void ei_watchdog(u_long arg);
static void pcnet_reset_8390(struct net_device *dev);
#endif
};
-/*======================================================================
-
- pcnet_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int pcnet_probe(struct pcmcia_device *link)
{
pcnet_dev_t *info;
info->p_dev = link;
link->priv = dev;
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
dev->netdev_ops = &pcnet_netdev_ops;
return pcnet_config(link);
} /* pcnet_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void pcnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
static hw_info_t *get_hwinfo(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- win_req_t req;
u_char __iomem *base, *virt;
int i, j;
/* Allocate a small memory window */
- req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
- req.Base = 0; req.Size = 0;
- req.AccessSpeed = 0;
- i = pcmcia_request_window(link, &req, &link->win);
+ link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+ link->resource[2]->start = 0; link->resource[2]->end = 0;
+ i = pcmcia_request_window(link, link->resource[2], 0);
if (i != 0)
return NULL;
- virt = ioremap(req.Base, req.Size);
+ virt = ioremap(link->resource[2]->start,
+ resource_size(link->resource[2]));
for (i = 0; i < NR_INFO; i++) {
- pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1));
- base = &virt[hw_info[i].offset & (req.Size-1)];
+ pcmcia_map_mem_page(link, link->resource[2],
+ hw_info[i].offset & ~(resource_size(link->resource[2])-1));
+ base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)];
if ((readb(base+0) == hw_info[i].a0) &&
(readb(base+2) == hw_info[i].a1) &&
(readb(base+4) == hw_info[i].a2)) {
}
iounmap(virt);
- j = pcmcia_release_window(link, link->win);
+ j = pcmcia_release_window(link, link->resource[2]);
return (i < NR_INFO) ? hw_info+i : NULL;
} /* get_hwinfo */
int i, j;
/* Not much of a test, but the alternatives are messy */
- if (link->conf.ConfigBase != 0x03c0)
+ if (link->config_base != 0x03c0)
return NULL;
outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */
dev->dev_addr[i] = j & 0xff;
dev->dev_addr[i+1] = j >> 8;
}
- printk(KERN_NOTICE "pcnet_cs: this is an AX88190 card!\n");
- printk(KERN_NOTICE "pcnet_cs: use axnet_cs instead.\n");
return NULL;
}
return &default_info;
} /* get_hwired */
-/*======================================================================
-
- pcnet_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
}
}
-static int pcnet_confcheck(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int *priv = priv_data;
int try = (*priv & 0x1);
- int i;
- cistpl_io_t *io = &cfg->io;
- if (cfg->index == 0 || cfg->io.nwin == 0)
- return -EINVAL;
+ *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- p_dev->resource[1]->start = io->win[1-i].base;
- p_dev->resource[1]->end = io->win[1-i].len;
- } else {
- i = p_dev->resource[1]->end = 0;
- }
+ if (p_dev->config_index == 0)
+ return -EINVAL;
- *priv &= ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
+ return -EINVAL;
- p_dev->resource[0]->start = io->win[i].base;
- p_dev->resource[0]->end = io->win[i].len;
- if (!try)
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- else
+ if (try)
p_dev->io_lines = 16;
- if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
- return try_io_port(p_dev);
-
- return -EINVAL;
+ return try_io_port(p_dev);
}
static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
if (!link->irq)
return NULL;
- if (resource_size(link->resource[1]) == 8) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
+ if (resource_size(link->resource[1]) == 8)
+ link->config_flags |= CONF_ENABLE_SPKR;
+
if ((link->manf_id == MANFID_IBM) &&
(link->card_id == PRODID_IBM_HOME_AND_AWAY))
- link->conf.ConfigIndex |= 0x10;
+ link->config_index |= 0x10;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
return NULL;
} else
dev->if_port = 0;
- if ((link->conf.ConfigBase == 0x03c0) &&
+ if ((link->config_base == 0x03c0) &&
(link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
dev_info(&link->dev,
"this is an AX88190 card - use axnet_cs instead.\n");
ei_status.name = "NE2000";
ei_status.word16 = 1;
- ei_status.reset_8390 = &pcnet_reset_8390;
-
- SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+ ei_status.reset_8390 = pcnet_reset_8390;
if (info->flags & (IS_DL10019|IS_DL10022))
mii_phy_probe(dev);
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
- printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto failed;
}
if (info->flags & (IS_DL10019|IS_DL10022)) {
u_char id = inb(dev->base_addr + 0x1a);
- printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ",
- dev->name, ((info->flags & IS_DL10022) ? 22 : 19), id);
+ netdev_info(dev, "NE2000 (DL100%d rev %02x): ",
+ (info->flags & IS_DL10022) ? 22 : 19, id);
if (info->pna_phy)
- printk("PNA, ");
+ pr_cont("PNA, ");
} else {
- printk(KERN_INFO "%s: NE2000 Compatible: ", dev->name);
+ netdev_info(dev, "NE2000 Compatible: ");
}
- printk("io %#3lx, irq %d,", dev->base_addr, dev->irq);
+ pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq);
if (info->flags & USE_SHMEM)
- printk (" mem %#5lx,", dev->mem_start);
+ pr_cont(" mem %#5lx,", dev->mem_start);
if (info->flags & HAS_MISC_REG)
- printk(" %s xcvr,", if_names[dev->if_port]);
- printk(" hw_addr %pM\n", dev->dev_addr);
+ pr_cont(" %s xcvr,", if_names[dev->if_port]);
+ pr_cont(" hw_addr %pM\n", dev->dev_addr);
return 0;
failed:
return -ENODEV;
} /* pcnet_config */
-/*======================================================================
-
- After a card is removed, pcnet_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void pcnet_release(struct pcmcia_device *link)
{
pcnet_dev_t *info = PRIV(link->priv);
pcmcia_disable_device(link);
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
static int pcnet_suspend(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
phyid = tmp << 16;
phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
phyid &= MII_PHYID_REV_MASK;
- pr_debug("%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
+ netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid);
if (phyid == AM79C9XX_HOME_PHY) {
info->pna_phy = i;
} else if (phyid != AM79C9XX_ETH_PHY) {
info->phy_id = info->eth_phy;
info->link_status = 0x00;
init_timer(&info->watchdog);
- info->watchdog.function = &ei_watchdog;
+ info->watchdog.function = ei_watchdog;
info->watchdog.data = (u_long)dev;
info->watchdog.expires = jiffies + HZ;
add_timer(&info->watchdog);
outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
if (i == 100)
- printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n",
- dev->name);
+ netdev_err(dev, "pcnet_reset_8390() did not complete.\n");
+
set_misc_reg(dev);
} /* pcnet_reset_8390 */
else if ((map->port < 1) || (map->port > 2))
return -EINVAL;
dev->if_port = map->port;
- printk(KERN_INFO "%s: switched to %s port\n",
- dev->name, if_names[dev->if_port]);
+ netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
NS8390_init(dev, 1);
}
return 0;
this, we can limp along even if the interrupt is blocked */
if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
if (!info->fast_poll)
- printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+ netdev_info(dev, "interrupt(s) dropped!\n");
ei_irq_wrapper(dev->irq, dev);
info->fast_poll = HZ;
}
if (info->eth_phy) {
info->phy_id = info->eth_phy = 0;
} else {
- printk(KERN_INFO "%s: MII is missing!\n", dev->name);
+ netdev_info(dev, "MII is missing!\n");
info->flags &= ~HAS_MII;
}
goto reschedule;
link &= 0x0004;
if (link != info->link_status) {
u_short p = mdio_read(mii_addr, info->phy_id, 5);
- printk(KERN_INFO "%s: %s link beat\n", dev->name,
- (link) ? "found" : "lost");
+ netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
if (link && (info->flags & IS_DL10022)) {
/* Disable collision detection on full duplex links */
outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG);
if (link) {
if (info->phy_id == info->eth_phy) {
if (p)
- printk(KERN_INFO "%s: autonegotiation complete: "
- "%sbaseT-%cD selected\n", dev->name,
+ netdev_info(dev, "autonegotiation complete: "
+ "%sbaseT-%cD selected\n",
((p & 0x0180) ? "100" : "10"),
((p & 0x0140) ? 'F' : 'H'));
else
- printk(KERN_INFO "%s: link partner did not "
- "autonegotiate\n", dev->name);
+ netdev_info(dev, "link partner did not autonegotiate\n");
}
NS8390_init(dev, 1);
}
/* isolate this MII and try flipping to the other one */
mdio_write(mii_addr, info->phy_id, 0, 0x0400);
info->phy_id ^= info->pna_phy ^ info->eth_phy;
- printk(KERN_INFO "%s: switched to %s transceiver\n", dev->name,
+ netdev_info(dev, "switched to %s transceiver\n",
(info->phy_id == info->eth_phy) ? "ethernet" : "PNA");
mdio_write(mii_addr, info->phy_id, 0,
(info->phy_id == info->eth_phy) ? 0x1000 : 0);
/*====================================================================*/
-static void netdev_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strcpy(info->driver, "pcnet_cs");
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = netdev_get_drvinfo,
-};
-
-/*====================================================================*/
-
static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
unsigned int nic_base = dev->base_addr;
if (ei_status.dmaing) {
- printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
+ netdev_notice(dev, "DMAing conflict in dma_block_input."
"[DMAstat:%1x][irqlock:%1x]\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
+ ei_status.dmaing, ei_status.irqlock);
return;
}
char *buf = skb->data;
if ((ei_debug > 4) && (count != 4))
- pr_debug("%s: [bi=%d]\n", dev->name, count+4);
+ netdev_dbg(dev, "[bi=%d]\n", count+4);
if (ei_status.dmaing) {
- printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
+ netdev_notice(dev, "DMAing conflict in dma_block_input."
"[DMAstat:%1x][irqlock:%1x]\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
+ ei_status.dmaing, ei_status.irqlock);
return;
}
ei_status.dmaing |= 0x01;
break;
} while (--tries > 0);
if (tries <= 0)
- printk(KERN_NOTICE "%s: RX transfer address mismatch,"
+ netdev_notice(dev, "RX transfer address mismatch,"
"%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, ring_offset + xfer_count, addr);
+ ring_offset + xfer_count, addr);
}
#endif
outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
#ifdef PCMCIA_DEBUG
if (ei_debug > 4)
- printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count);
+ netdev_dbg(dev, "[bo=%d]\n", count);
#endif
/* Round the count up for word writes. Do we need to do this?
if (count & 0x01)
count++;
if (ei_status.dmaing) {
- printk(KERN_NOTICE "%s: DMAing conflict in dma_block_output."
+ netdev_notice(dev, "DMAing conflict in dma_block_output."
"[DMAstat:%1x][irqlock:%1x]\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
+ ei_status.dmaing, ei_status.irqlock);
return;
}
ei_status.dmaing |= 0x01;
break;
} while (--tries > 0);
if (tries <= 0) {
- printk(KERN_NOTICE "%s: Tx packet transfer address mismatch,"
+ netdev_notice(dev, "Tx packet transfer address mismatch,"
"%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, (start_page << 8) + count, addr);
+ (start_page << 8) + count, addr);
if (retries++ == 0)
goto retry;
}
while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) {
- printk(KERN_NOTICE "%s: timeout waiting for Tx RDC.\n",
- dev->name);
+ netdev_notice(dev, "timeout waiting for Tx RDC.\n");
pcnet_reset_8390(dev);
NS8390_init(dev, 1);
break;
ei_status.stop_page = stop_pg;
/* set up block i/o functions */
- ei_status.get_8390_hdr = &dma_get_8390_hdr;
- ei_status.block_input = &dma_block_input;
- ei_status.block_output = &dma_block_output;
+ ei_status.get_8390_hdr = dma_get_8390_hdr;
+ ei_status.block_input = dma_block_input;
+ ei_status.block_output = dma_block_output;
return 0;
}
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- win_req_t req;
int i, window_size, offset, ret;
window_size = (stop_pg - start_pg) << 8;
window_size = roundup_pow_of_two(window_size);
/* Allocate a memory window */
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
- req.Attributes |= WIN_USE_WAIT;
- req.Base = 0; req.Size = window_size;
- req.AccessSpeed = mem_speed;
- ret = pcmcia_request_window(link, &req, &link->win);
+ link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+ link->resource[3]->flags |= WIN_USE_WAIT;
+ link->resource[3]->start = 0; link->resource[3]->end = window_size;
+ ret = pcmcia_request_window(link, link->resource[3], mem_speed);
if (ret)
goto failed;
offset = (start_pg << 8) + cm_offset;
offset -= offset % window_size;
- ret = pcmcia_map_mem_page(link, link->win, offset);
+ ret = pcmcia_map_mem_page(link, link->resource[3], offset);
if (ret)
goto failed;
/* Try scribbling on the buffer */
- info->base = ioremap(req.Base, window_size);
+ info->base = ioremap(link->resource[3]->start,
+ resource_size(link->resource[3]));
for (i = 0; i < (TX_PAGES<<8); i += 2)
__raw_writew((i>>1), info->base+offset+i);
udelay(100);
pcnet_reset_8390(dev);
if (i != (TX_PAGES<<8)) {
iounmap(info->base);
- pcmcia_release_window(link, link->win);
- info->base = NULL; link->win = 0;
+ pcmcia_release_window(link, link->resource[3]);
+ info->base = NULL;
goto failed;
}
ei_status.mem = info->base + offset;
- ei_status.priv = req.Size;
+ ei_status.priv = resource_size(link->resource[3]);
dev->mem_start = (u_long)ei_status.mem;
- dev->mem_end = dev->mem_start + req.Size;
+ dev->mem_end = dev->mem_start + resource_size(link->resource[3]);
ei_status.tx_start_page = start_pg;
ei_status.rx_start_page = start_pg + TX_PAGES;
- ei_status.stop_page = start_pg + ((req.Size - offset) >> 8);
+ ei_status.stop_page = start_pg + (
+ (resource_size(link->resource[3]) - offset) >> 8);
/* set up block i/o functions */
- ei_status.get_8390_hdr = &shmem_get_8390_hdr;
- ei_status.block_input = &shmem_block_input;
- ei_status.block_output = &shmem_block_output;
+ ei_status.get_8390_hdr = shmem_get_8390_hdr;
+ ei_status.block_input = shmem_block_input;
+ ei_status.block_output = shmem_block_output;
info->flags |= USE_SHMEM;
return 0;
PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9),
PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
+ PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
MODULE_FIRMWARE("cis/tamarack.cis");
static struct pcmcia_driver pcnet_driver = {
- .drv = {
- .name = "pcnet_cs",
- },
+ .name = "pcnet_cs",
.probe = pcnet_probe,
.remove = pcnet_detach,
.owner = THIS_MODULE,
projects / cascardo / linux.git / blobdiff