if WLAN
+source "drivers/net/wireless/admtek/Kconfig"
+source "drivers/net/wireless/ath/Kconfig"
+source "drivers/net/wireless/atmel/Kconfig"
+source "drivers/net/wireless/broadcom/Kconfig"
+source "drivers/net/wireless/cisco/Kconfig"
+source "drivers/net/wireless/intel/Kconfig"
+source "drivers/net/wireless/intersil/Kconfig"
+source "drivers/net/wireless/marvell/Kconfig"
+source "drivers/net/wireless/mediatek/Kconfig"
+source "drivers/net/wireless/ralink/Kconfig"
+source "drivers/net/wireless/realtek/Kconfig"
+source "drivers/net/wireless/rsi/Kconfig"
+source "drivers/net/wireless/st/Kconfig"
+source "drivers/net/wireless/ti/Kconfig"
+source "drivers/net/wireless/zydas/Kconfig"
+
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
depends on PCMCIA
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
-config LIBERTAS_THINFIRM
- tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
- depends on MAC80211
- select FW_LOADER
- ---help---
- A library for Marvell Libertas 8xxx devices using thinfirm.
-
-config LIBERTAS_THINFIRM_DEBUG
- bool "Enable full debugging output in the Libertas thin firmware module."
- depends on LIBERTAS_THINFIRM
- ---help---
- Debugging support.
-
-config LIBERTAS_THINFIRM_USB
- tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
- depends on LIBERTAS_THINFIRM && USB
- ---help---
- A driver for Marvell Libertas 8388 USB devices using thinfirm.
-
-config AIRO
- tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
- select WIRELESS_EXT
- select CRYPTO
- select WEXT_SPY
- select WEXT_PRIV
- ---help---
- This is the standard Linux driver to support Cisco/Aironet ISA and
- PCI 802.11 wireless cards.
- It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- - with or without encryption) as well as card before the Cisco
- acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
-
- This driver support both the standard Linux Wireless Extensions
- and Cisco proprietary API, so both the Linux Wireless Tools and the
- Cisco Linux utilities can be used to configure the card.
-
- The driver can be compiled as a module and will be named "airo".
-
-config ATMEL
- tristate "Atmel at76c50x chipset 802.11b support"
- depends on CFG80211 && (PCI || PCMCIA)
- select WIRELESS_EXT
- select WEXT_PRIV
- select FW_LOADER
- select CRC32
- ---help---
- A driver 802.11b wireless cards based on the Atmel fast-vnet
- chips. This driver supports standard Linux wireless extensions.
-
- Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
- one of these, you will need to provide a firmware image
- to be loaded into the card by the driver. The Atmel
- firmware package can be downloaded from
- <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
- tristate "Atmel at76c506 PCI cards"
- depends on ATMEL && PCI
- ---help---
- Enable support for PCI and mini-PCI cards containing the
- Atmel at76c506 chip.
-
-config PCMCIA_ATMEL
- tristate "Atmel at76c502/at76c504 PCMCIA cards"
- depends on ATMEL && PCMCIA
- select WIRELESS_EXT
- select FW_LOADER
- select CRC32
- ---help---
- Enable support for PCMCIA cards containing the
- Atmel at76c502 and at76c504 chips.
-
-config AT76C50X_USB
- tristate "Atmel at76c503/at76c505/at76c505a USB cards"
- depends on MAC80211 && USB
- select FW_LOADER
- ---help---
- Enable support for USB Wireless devices using Atmel at76c503,
- at76c505 or at76c505a chips.
-
-config AIRO_CS
- tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
- select WIRELESS_EXT
- select WEXT_SPY
- select WEXT_PRIV
- select CRYPTO
- select CRYPTO_AES
- ---help---
- This is the standard Linux driver to support Cisco/Aironet PCMCIA
- 802.11 wireless cards. This driver is the same as the Aironet
- driver part of the Linux Pcmcia package.
- It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- - with or without encryption) as well as card before the Cisco
- acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
- supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
- 802.11b cards.
-
- This driver support both the standard Linux Wireless Extensions
- and Cisco proprietary API, so both the Linux Wireless Tools and the
- Cisco Linux utilities can be used to configure the card.
-
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA
It has basic support for Linux wireless extensions and initial
micro support for ethtool.
-config PRISM54
- tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
- depends on PCI
- select WIRELESS_EXT
- select WEXT_SPY
- select WEXT_PRIV
- select FW_LOADER
- ---help---
- This enables support for FullMAC PCI/Cardbus prism54 devices. This
- driver is now deprecated in favor for the SoftMAC driver, p54pci.
- p54pci supports FullMAC PCI/Cardbus devices as well.
-
- For more information refer to the p54 wiki:
-
- http://wireless.kernel.org/en/users/Drivers/p54
-
- Note: You need a motherboard with DMA support to use any of these cards
-
- When built as module you get the module prism54
-
-config USB_ZD1201
- tristate "USB ZD1201 based Wireless device support"
- depends on CFG80211 && USB
- select WIRELESS_EXT
- select WEXT_PRIV
- select FW_LOADER
+config MAC80211_HWSIM
+ tristate "Simulated radio testing tool for mac80211"
+ depends on MAC80211
---help---
- Say Y if you want to use wireless LAN adapters based on the ZyDAS
- ZD1201 chip.
-
- This driver makes the adapter appear as a normal Ethernet interface,
- typically on wlan0.
-
- The zd1201 device requires external firmware to be loaded.
- This can be found at http://linux-lc100020.sourceforge.net/
+ This driver is a developer testing tool that can be used to test
+ IEEE 802.11 networking stack (mac80211) functionality. This is not
+ needed for normal wireless LAN usage and is only for testing. See
+ Documentation/networking/mac80211_hwsim for more information on how
+ to use this tool.
- To compile this driver as a module, choose M here: the
- module will be called zd1201.
+ To compile this driver as a module, choose M here: the module will be
+ called mac80211_hwsim. If unsure, say N.
config USB_NET_RNDIS_WLAN
tristate "Wireless RNDIS USB support"
If you choose to build a module, it'll be called rndis_wlan.
-config ADM8211
- tristate "ADMtek ADM8211 support"
- depends on MAC80211 && PCI
- select CRC32
- select EEPROM_93CX6
- ---help---
- This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
- These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
-
- Xterasys Cardbus XN-2411b
- Blitz NetWave Point PC
- TrendNet 221pc
- Belkin F5D6001
- SMC 2635W
- Linksys WPC11 v1
- Fiberline FL-WL-200X
- 3com Office Connect (3CRSHPW796)
- Corega WLPCIB-11
- SMC 2602W V2 EU
- D-Link DWL-520 Revision C
-
- However, some of these cards have been replaced with other chips
- like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
- the Ralink RT2400 (SMC2635W) without a model number change.
-
- Thanks to Infineon-ADMtek for their support of this driver.
-
-source "drivers/net/wireless/realtek/rtl818x/Kconfig"
-
-config MAC80211_HWSIM
- tristate "Simulated radio testing tool for mac80211"
- depends on MAC80211
- ---help---
- This driver is a developer testing tool that can be used to test
- IEEE 802.11 networking stack (mac80211) functionality. This is not
- needed for normal wireless LAN usage and is only for testing. See
- Documentation/networking/mac80211_hwsim for more information on how
- to use this tool.
-
- To compile this driver as a module, choose M here: the module will be
- called mac80211_hwsim. If unsure, say N.
-
-config MWL8K
- tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
- depends on MAC80211 && PCI
- ---help---
- This driver supports Marvell TOPDOG 802.11 wireless cards.
-
- To compile this driver as a module, choose M here: the module
- will be called mwl8k. If unsure, say N.
-
-source "drivers/net/wireless/ath/Kconfig"
-source "drivers/net/wireless/b43/Kconfig"
-source "drivers/net/wireless/b43legacy/Kconfig"
-source "drivers/net/wireless/brcm80211/Kconfig"
-source "drivers/net/wireless/hostap/Kconfig"
-source "drivers/net/wireless/ipw2x00/Kconfig"
-source "drivers/net/wireless/iwlwifi/Kconfig"
-source "drivers/net/wireless/iwlegacy/Kconfig"
-source "drivers/net/wireless/libertas/Kconfig"
-source "drivers/net/wireless/orinoco/Kconfig"
-source "drivers/net/wireless/p54/Kconfig"
-source "drivers/net/wireless/rt2x00/Kconfig"
-source "drivers/net/wireless/mediatek/Kconfig"
-source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
-source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
-source "drivers/net/wireless/ti/Kconfig"
-source "drivers/net/wireless/zd1211rw/Kconfig"
-source "drivers/net/wireless/mwifiex/Kconfig"
-source "drivers/net/wireless/cw1200/Kconfig"
-source "drivers/net/wireless/rsi/Kconfig"
-
endif # WLAN
projects / cascardo / linux.git / blobdiff