MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- {
- .id = QCA988X_HW_1_0_VERSION,
- .name = "qca988x hw1.0",
- .patch_load_addr = QCA988X_HW_1_0_PATCH_LOAD_ADDR,
- .fw = {
- .dir = QCA988X_HW_1_0_FW_DIR,
- .fw = QCA988X_HW_1_0_FW_FILE,
- .otp = QCA988X_HW_1_0_OTP_FILE,
- .board = QCA988X_HW_1_0_BOARD_DATA_FILE,
- },
- },
{
.id = QCA988X_HW_2_0_VERSION,
.name = "qca988x hw2.0",
static void ath10k_send_suspend_complete(struct ath10k *ar)
{
- ath10k_dbg(ATH10K_DBG_CORE, "%s\n", __func__);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n");
ar->is_target_paused = true;
wake_up(&ar->event_queue);
}
-static int ath10k_check_fw_version(struct ath10k *ar)
-{
- char version[32];
-
- if (ar->fw_version_major >= SUPPORTED_FW_MAJOR &&
- ar->fw_version_minor >= SUPPORTED_FW_MINOR &&
- ar->fw_version_release >= SUPPORTED_FW_RELEASE &&
- ar->fw_version_build >= SUPPORTED_FW_BUILD)
- return 0;
-
- snprintf(version, sizeof(version), "%u.%u.%u.%u",
- SUPPORTED_FW_MAJOR, SUPPORTED_FW_MINOR,
- SUPPORTED_FW_RELEASE, SUPPORTED_FW_BUILD);
-
- ath10k_warn("WARNING: Firmware version %s is not officially supported.\n",
- ar->hw->wiphy->fw_version);
- ath10k_warn("Please upgrade to version %s (or newer)\n", version);
-
- return 0;
-}
-
static int ath10k_init_connect_htc(struct ath10k *ar)
{
int status;
goto timeout;
}
- ath10k_dbg(ATH10K_DBG_CORE, "core wmi ready\n");
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot wmi ready\n");
return 0;
timeout:
return ret;
}
- ath10k_dbg(ATH10K_DBG_CORE,
- "ath10k: Board extended Data download addr: 0x%x\n",
+ ath10k_dbg(ATH10K_DBG_BOOT,
+ "boot push board extended data addr 0x%x\n",
board_ext_data_addr);
if (board_ext_data_addr == 0)
static int ath10k_download_board_data(struct ath10k *ar)
{
- const struct firmware *fw = ar->board_data;
+ const struct firmware *fw = ar->board;
u32 board_data_size = QCA988X_BOARD_DATA_SZ;
u32 address;
int ret;
static void ath10k_core_free_firmware_files(struct ath10k *ar)
{
- if (ar->board_data && !IS_ERR(ar->board_data))
- release_firmware(ar->board_data);
+ if (ar->board && !IS_ERR(ar->board))
+ release_firmware(ar->board);
if (ar->otp && !IS_ERR(ar->otp))
release_firmware(ar->otp);
if (ar->firmware && !IS_ERR(ar->firmware))
release_firmware(ar->firmware);
- ar->board_data = NULL;
+ ar->board = NULL;
ar->otp = NULL;
ar->firmware = NULL;
}
return -EINVAL;
}
- ar->board_data = ath10k_fetch_fw_file(ar,
- ar->hw_params.fw.dir,
- ar->hw_params.fw.board);
- if (IS_ERR(ar->board_data)) {
- ret = PTR_ERR(ar->board_data);
+ ar->board = ath10k_fetch_fw_file(ar,
+ ar->hw_params.fw.dir,
+ ar->hw_params.fw.board);
+ if (IS_ERR(ar->board)) {
+ ret = PTR_ERR(ar->board);
ath10k_err("could not fetch board data (%d)\n", ret);
goto err;
}
return ret;
}
+ /* Set the UART baud rate to 19200. */
+ ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200);
+ if (ret) {
+ ath10k_warn("could not set the baud rate (%d)\n", ret);
+ return ret;
+ }
+
ath10k_info("UART prints enabled\n");
return 0;
}
INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work);
skb_queue_head_init(&ar->offchan_tx_queue);
+ INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work);
+ skb_queue_head_init(&ar->wmi_mgmt_tx_queue);
+
init_waitqueue_head(&ar->event_queue);
INIT_WORK(&ar->restart_work, ath10k_core_restart);
ath10k_info("firmware %s booted\n", ar->hw->wiphy->fw_version);
- status = ath10k_check_fw_version(ar);
- if (status)
- goto err_disconnect_htc;
-
status = ath10k_wmi_cmd_init(ar);
if (status) {
ath10k_err("could not send WMI init command (%d)\n", status);
if (status)
goto err_disconnect_htc;
+ status = ath10k_debug_start(ar);
+ if (status)
+ goto err_disconnect_htc;
+
ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
return 0;
void ath10k_core_stop(struct ath10k *ar)
{
+ ath10k_debug_stop(ar);
ath10k_htc_stop(&ar->htc);
ath10k_htt_detach(&ar->htt);
ath10k_wmi_detach(ar);
return 0;
}
-int ath10k_core_register(struct ath10k *ar)
+static int ath10k_core_check_chip_id(struct ath10k *ar)
+{
+ u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
+
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
+ ar->chip_id, hw_revision);
+
+ /* Check that we are not using hw1.0 (some of them have same pci id
+ * as hw2.0) before doing anything else as ath10k crashes horribly
+ * due to missing hw1.0 workarounds. */
+ switch (hw_revision) {
+ case QCA988X_HW_1_0_CHIP_ID_REV:
+ ath10k_err("ERROR: qca988x hw1.0 is not supported\n");
+ return -EOPNOTSUPP;
+
+ case QCA988X_HW_2_0_CHIP_ID_REV:
+ /* known hardware revision, continue normally */
+ return 0;
+
+ default:
+ ath10k_warn("Warning: hardware revision unknown (0x%x), expect problems\n",
+ ar->chip_id);
+ return 0;
+ }
+
+ return 0;
+}
+
+int ath10k_core_register(struct ath10k *ar, u32 chip_id)
{
int status;
+ ar->chip_id = chip_id;
+
+ status = ath10k_core_check_chip_id(ar);
+ if (status) {
+ ath10k_err("Unsupported chip id 0x%08x\n", ar->chip_id);
+ return status;
+ }
+
status = ath10k_core_probe_fw(ar);
if (status) {
ath10k_err("could not probe fw (%d)\n", status);
* Otherwise we will fail to submit commands to FW and mac80211 will be
* unhappy about callback failures. */
ath10k_mac_unregister(ar);
+
ath10k_core_free_firmware_files(ar);
}
EXPORT_SYMBOL(ath10k_core_unregister);
projects / cascardo / linux.git / blobdiff