.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 2116,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
- .fw = QCA988X_HW_2_0_FW_FILE,
- .otp = QCA988X_HW_2_0_OTP_FILE,
.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
.board_size = QCA988X_BOARD_DATA_SZ,
.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
- .fw = QCA6174_HW_2_1_FW_FILE,
- .otp = QCA6174_HW_2_1_OTP_FILE,
.board = QCA6174_HW_2_1_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
- .fw = QCA6174_HW_2_1_FW_FILE,
- .otp = QCA6174_HW_2_1_OTP_FILE,
.board = QCA6174_HW_2_1_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
- .fw = QCA6174_HW_3_0_FW_FILE,
- .otp = QCA6174_HW_3_0_OTP_FILE,
.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
- .fw = QCA6174_HW_3_0_FW_FILE,
- .otp = QCA6174_HW_3_0_OTP_FILE,
.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
.channel_counters_freq_hz = 150000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
- .num_msdu_desc = 1424,
- .qcache_active_peers = 50,
.tx_chain_mask = 0xf,
.rx_chain_mask = 0xf,
.max_spatial_stream = 4,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
- .fw = QCA99X0_HW_2_0_FW_FILE,
- .otp = QCA99X0_HW_2_0_OTP_FILE,
.board = QCA99X0_HW_2_0_BOARD_DATA_FILE,
.board_size = QCA99X0_BOARD_DATA_SZ,
.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
- .fw = QCA9377_HW_1_0_FW_FILE,
- .otp = QCA9377_HW_1_0_OTP_FILE,
.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
- .fw = QCA9377_HW_1_0_FW_FILE,
- .otp = QCA9377_HW_1_0_OTP_FILE,
.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
.channel_counters_freq_hz = 125000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
- .num_msdu_desc = 2500,
- .qcache_active_peers = 35,
.tx_chain_mask = 0x3,
.rx_chain_mask = 0x3,
.max_spatial_stream = 2,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA4019_HW_1_0_FW_DIR,
- .fw = QCA4019_HW_1_0_FW_FILE,
- .otp = QCA4019_HW_1_0_OTP_FILE,
.board = QCA4019_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA4019_BOARD_DATA_SZ,
.board_ext_size = QCA4019_BOARD_EXT_DATA_SZ,
return ret;
}
-static int ath10k_download_cal_file(struct ath10k *ar)
+static int ath10k_download_cal_file(struct ath10k *ar,
+ const struct firmware *file)
{
int ret;
- if (!ar->cal_file)
+ if (!file)
return -ENOENT;
- if (IS_ERR(ar->cal_file))
- return PTR_ERR(ar->cal_file);
+ if (IS_ERR(file))
+ return PTR_ERR(file);
- ret = ath10k_download_board_data(ar, ar->cal_file->data,
- ar->cal_file->size);
+ ret = ath10k_download_board_data(ar, file->data, file->size);
if (ret) {
ath10k_err(ar, "failed to download cal_file data: %d\n", ret);
return ret;
return 0;
}
-static int ath10k_download_cal_dt(struct ath10k *ar)
+static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name)
{
struct device_node *node;
int data_len;
*/
return -ENOENT;
- if (!of_get_property(node, "qcom,ath10k-calibration-data",
- &data_len)) {
+ if (!of_get_property(node, dt_name, &data_len)) {
/* The calibration data node is optional */
return -ENOENT;
}
- if (data_len != QCA988X_CAL_DATA_LEN) {
+ if (data_len != ar->hw_params.cal_data_len) {
ath10k_warn(ar, "invalid calibration data length in DT: %d\n",
data_len);
ret = -EMSGSIZE;
goto out;
}
- ret = of_property_read_u8_array(node, "qcom,ath10k-calibration-data",
- data, data_len);
+ ret = of_property_read_u8_array(node, dt_name, data, data_len);
if (ret) {
ath10k_warn(ar, "failed to read calibration data from DT: %d\n",
ret);
address = ar->hw_params.patch_load_addr;
- if (!ar->otp_data || !ar->otp_len) {
+ if (!ar->normal_mode_fw.fw_file.otp_data ||
+ !ar->normal_mode_fw.fw_file.otp_len) {
ath10k_warn(ar,
"failed to retrieve board id because of invalid otp\n");
return -ENODATA;
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot upload otp to 0x%x len %zd for board id\n",
- address, ar->otp_len);
+ address, ar->normal_mode_fw.fw_file.otp_len);
- ret = ath10k_bmi_fast_download(ar, address, ar->otp_data, ar->otp_len);
+ ret = ath10k_bmi_fast_download(ar, address,
+ ar->normal_mode_fw.fw_file.otp_data,
+ ar->normal_mode_fw.fw_file.otp_len);
if (ret) {
ath10k_err(ar, "could not write otp for board id check: %d\n",
ret);
u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param;
int ret;
- ret = ath10k_download_board_data(ar, ar->board_data, ar->board_len);
+ ret = ath10k_download_board_data(ar,
+ ar->running_fw->board_data,
+ ar->running_fw->board_len);
if (ret) {
ath10k_err(ar, "failed to download board data: %d\n", ret);
return ret;
/* OTP is optional */
- if (!ar->otp_data || !ar->otp_len) {
+ if (!ar->running_fw->fw_file.otp_data ||
+ !ar->running_fw->fw_file.otp_len) {
ath10k_warn(ar, "Not running otp, calibration will be incorrect (otp-data %p otp_len %zd)!\n",
- ar->otp_data, ar->otp_len);
+ ar->running_fw->fw_file.otp_data,
+ ar->running_fw->fw_file.otp_len);
return 0;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n",
- address, ar->otp_len);
+ address, ar->running_fw->fw_file.otp_len);
- ret = ath10k_bmi_fast_download(ar, address, ar->otp_data, ar->otp_len);
+ ret = ath10k_bmi_fast_download(ar, address,
+ ar->running_fw->fw_file.otp_data,
+ ar->running_fw->fw_file.otp_len);
if (ret) {
ath10k_err(ar, "could not write otp (%d)\n", ret);
return ret;
return 0;
}
-static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode mode)
+static int ath10k_download_fw(struct ath10k *ar)
{
u32 address, data_len;
- const char *mode_name;
const void *data;
int ret;
address = ar->hw_params.patch_load_addr;
- switch (mode) {
- case ATH10K_FIRMWARE_MODE_NORMAL:
- data = ar->firmware_data;
- data_len = ar->firmware_len;
- mode_name = "normal";
- ret = ath10k_swap_code_seg_configure(ar,
- ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
- if (ret) {
- ath10k_err(ar, "failed to configure fw code swap: %d\n",
- ret);
- return ret;
- }
- break;
- case ATH10K_FIRMWARE_MODE_UTF:
- data = ar->testmode.utf_firmware_data;
- data_len = ar->testmode.utf_firmware_len;
- mode_name = "utf";
- break;
- default:
- ath10k_err(ar, "unknown firmware mode: %d\n", mode);
- return -EINVAL;
+ data = ar->running_fw->fw_file.firmware_data;
+ data_len = ar->running_fw->fw_file.firmware_len;
+
+ ret = ath10k_swap_code_seg_configure(ar,
+ ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
+ if (ret) {
+ ath10k_err(ar, "failed to configure fw code swap: %d\n",
+ ret);
+ return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
- "boot uploading firmware image %p len %d mode %s\n",
- data, data_len, mode_name);
+ "boot uploading firmware image %p len %d\n",
+ data, data_len);
ret = ath10k_bmi_fast_download(ar, address, data, data_len);
if (ret) {
- ath10k_err(ar, "failed to download %s firmware: %d\n",
- mode_name, ret);
+ ath10k_err(ar, "failed to download firmware: %d\n",
+ ret);
return ret;
}
static void ath10k_core_free_board_files(struct ath10k *ar)
{
- if (!IS_ERR(ar->board))
- release_firmware(ar->board);
+ if (!IS_ERR(ar->normal_mode_fw.board))
+ release_firmware(ar->normal_mode_fw.board);
- ar->board = NULL;
- ar->board_data = NULL;
- ar->board_len = 0;
+ ar->normal_mode_fw.board = NULL;
+ ar->normal_mode_fw.board_data = NULL;
+ ar->normal_mode_fw.board_len = 0;
}
static void ath10k_core_free_firmware_files(struct ath10k *ar)
{
- if (!IS_ERR(ar->otp))
- release_firmware(ar->otp);
-
- if (!IS_ERR(ar->firmware))
- release_firmware(ar->firmware);
+ if (!IS_ERR(ar->normal_mode_fw.fw_file.firmware))
+ release_firmware(ar->normal_mode_fw.fw_file.firmware);
if (!IS_ERR(ar->cal_file))
release_firmware(ar->cal_file);
ath10k_swap_code_seg_release(ar);
- ar->otp = NULL;
- ar->otp_data = NULL;
- ar->otp_len = 0;
+ ar->normal_mode_fw.fw_file.otp_data = NULL;
+ ar->normal_mode_fw.fw_file.otp_len = 0;
- ar->firmware = NULL;
- ar->firmware_data = NULL;
- ar->firmware_len = 0;
+ ar->normal_mode_fw.fw_file.firmware = NULL;
+ ar->normal_mode_fw.fw_file.firmware_data = NULL;
+ ar->normal_mode_fw.fw_file.firmware_len = 0;
ar->cal_file = NULL;
}
{
char filename[100];
+ /* pre-cal-<bus>-<id>.bin */
+ scnprintf(filename, sizeof(filename), "pre-cal-%s-%s.bin",
+ ath10k_bus_str(ar->hif.bus), dev_name(ar->dev));
+
+ ar->pre_cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename);
+ if (!IS_ERR(ar->pre_cal_file))
+ goto success;
+
/* cal-<bus>-<id>.bin */
scnprintf(filename, sizeof(filename), "cal-%s-%s.bin",
ath10k_bus_str(ar->hif.bus), dev_name(ar->dev));
if (IS_ERR(ar->cal_file))
/* calibration file is optional, don't print any warnings */
return PTR_ERR(ar->cal_file);
-
+success:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "found calibration file %s/%s\n",
ATH10K_FW_DIR, filename);
return -EINVAL;
}
- ar->board = ath10k_fetch_fw_file(ar,
- ar->hw_params.fw.dir,
- ar->hw_params.fw.board);
- if (IS_ERR(ar->board))
- return PTR_ERR(ar->board);
+ ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar,
+ ar->hw_params.fw.dir,
+ ar->hw_params.fw.board);
+ if (IS_ERR(ar->normal_mode_fw.board))
+ return PTR_ERR(ar->normal_mode_fw.board);
- ar->board_data = ar->board->data;
- ar->board_len = ar->board->size;
+ ar->normal_mode_fw.board_data = ar->normal_mode_fw.board->data;
+ ar->normal_mode_fw.board_len = ar->normal_mode_fw.board->size;
return 0;
}
"boot found board data for '%s'",
boardname);
- ar->board_data = board_ie_data;
- ar->board_len = board_ie_len;
+ ar->normal_mode_fw.board_data = board_ie_data;
+ ar->normal_mode_fw.board_len = board_ie_len;
ret = 0;
goto out;
const u8 *data;
int ret, ie_id;
- ar->board = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, filename);
- if (IS_ERR(ar->board))
- return PTR_ERR(ar->board);
+ ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar,
+ ar->hw_params.fw.dir,
+ filename);
+ if (IS_ERR(ar->normal_mode_fw.board))
+ return PTR_ERR(ar->normal_mode_fw.board);
- data = ar->board->data;
- len = ar->board->size;
+ data = ar->normal_mode_fw.board->data;
+ len = ar->normal_mode_fw.board->size;
/* magic has extra null byte padded */
magic_len = strlen(ATH10K_BOARD_MAGIC) + 1;
}
out:
- if (!ar->board_data || !ar->board_len) {
+ if (!ar->normal_mode_fw.board_data || !ar->normal_mode_fw.board_len) {
ath10k_err(ar,
"failed to fetch board data for %s from %s/%s\n",
boardname, ar->hw_params.fw.dir, filename);
return 0;
}
-static int ath10k_core_fetch_firmware_api_1(struct ath10k *ar)
-{
- int ret = 0;
-
- if (ar->hw_params.fw.fw == NULL) {
- ath10k_err(ar, "firmware file not defined\n");
- return -EINVAL;
- }
-
- ar->firmware = ath10k_fetch_fw_file(ar,
- ar->hw_params.fw.dir,
- ar->hw_params.fw.fw);
- if (IS_ERR(ar->firmware)) {
- ret = PTR_ERR(ar->firmware);
- ath10k_err(ar, "could not fetch firmware (%d)\n", ret);
- goto err;
- }
-
- ar->firmware_data = ar->firmware->data;
- ar->firmware_len = ar->firmware->size;
-
- /* OTP may be undefined. If so, don't fetch it at all */
- if (ar->hw_params.fw.otp == NULL)
- return 0;
-
- ar->otp = ath10k_fetch_fw_file(ar,
- ar->hw_params.fw.dir,
- ar->hw_params.fw.otp);
- if (IS_ERR(ar->otp)) {
- ret = PTR_ERR(ar->otp);
- ath10k_err(ar, "could not fetch otp (%d)\n", ret);
- goto err;
- }
-
- ar->otp_data = ar->otp->data;
- ar->otp_len = ar->otp->size;
-
- return 0;
-
-err:
- ath10k_core_free_firmware_files(ar);
- return ret;
-}
-
-static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
+static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name,
+ struct ath10k_fw_file *fw_file)
{
size_t magic_len, len, ie_len;
int ie_id, i, index, bit, ret;
__le32 *timestamp, *version;
/* first fetch the firmware file (firmware-*.bin) */
- ar->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, name);
- if (IS_ERR(ar->firmware)) {
+ fw_file->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir,
+ name);
+ if (IS_ERR(fw_file->firmware)) {
ath10k_err(ar, "could not fetch firmware file '%s/%s': %ld\n",
- ar->hw_params.fw.dir, name, PTR_ERR(ar->firmware));
- return PTR_ERR(ar->firmware);
+ ar->hw_params.fw.dir, name,
+ PTR_ERR(fw_file->firmware));
+ return PTR_ERR(fw_file->firmware);
}
- data = ar->firmware->data;
- len = ar->firmware->size;
+ data = fw_file->firmware->data;
+ len = fw_file->firmware->size;
/* magic also includes the null byte, check that as well */
magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1;
"found fw image ie (%zd B)\n",
ie_len);
- ar->firmware_data = data;
- ar->firmware_len = ie_len;
+ fw_file->firmware_data = data;
+ fw_file->firmware_len = ie_len;
break;
case ATH10K_FW_IE_OTP_IMAGE:
"found otp image ie (%zd B)\n",
ie_len);
- ar->otp_data = data;
- ar->otp_len = ie_len;
+ fw_file->otp_data = data;
+ fw_file->otp_len = ie_len;
break;
case ATH10K_FW_IE_WMI_OP_VERSION:
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"found fw code swap image ie (%zd B)\n",
ie_len);
- ar->swap.firmware_codeswap_data = data;
- ar->swap.firmware_codeswap_len = ie_len;
+ fw_file->codeswap_data = data;
+ fw_file->codeswap_len = ie_len;
break;
default:
ath10k_warn(ar, "Unknown FW IE: %u\n",
data += ie_len;
}
- if (!ar->firmware_data || !ar->firmware_len) {
+ if (!fw_file->firmware_data ||
+ !fw_file->firmware_len) {
ath10k_warn(ar, "No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n",
ar->hw_params.fw.dir, name);
ret = -ENOMEDIUM;
ar->fw_api = 5;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
- ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API5_FILE);
+ ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API5_FILE,
+ &ar->normal_mode_fw.fw_file);
if (ret == 0)
goto success;
ar->fw_api = 4;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
- ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API4_FILE);
+ ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API4_FILE,
+ &ar->normal_mode_fw.fw_file);
if (ret == 0)
goto success;
ar->fw_api = 3;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
- ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API3_FILE);
+ ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API3_FILE,
+ &ar->normal_mode_fw.fw_file);
if (ret == 0)
goto success;
ar->fw_api = 2;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
- ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API2_FILE);
- if (ret == 0)
+ ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API2_FILE,
+ &ar->normal_mode_fw.fw_file);
+ if (ret)
+ return ret;
+
+success:
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api);
+
+ return 0;
+}
+
+static int ath10k_core_pre_cal_download(struct ath10k *ar)
+{
+ int ret;
+
+ ret = ath10k_download_cal_file(ar, ar->pre_cal_file);
+ if (ret == 0) {
+ ar->cal_mode = ATH10K_PRE_CAL_MODE_FILE;
goto success;
+ }
- ar->fw_api = 1;
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot did not find a pre calibration file, try DT next: %d\n",
+ ret);
- ret = ath10k_core_fetch_firmware_api_1(ar);
- if (ret)
+ ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data");
+ if (ret) {
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "unable to load pre cal data from DT: %d\n", ret);
return ret;
+ }
+ ar->cal_mode = ATH10K_PRE_CAL_MODE_DT;
success:
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api);
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n",
+ ath10k_cal_mode_str(ar->cal_mode));
+
+ return 0;
+}
+
+static int ath10k_core_pre_cal_config(struct ath10k *ar)
+{
+ int ret;
+
+ ret = ath10k_core_pre_cal_download(ar);
+ if (ret) {
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "failed to load pre cal data: %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_core_get_board_id_from_otp(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to get board id: %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_download_and_run_otp(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to run otp: %d\n", ret);
+ return ret;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "pre cal configuration done successfully\n");
return 0;
}
{
int ret;
- ret = ath10k_download_cal_file(ar);
+ ret = ath10k_core_pre_cal_config(ar);
+ if (ret == 0)
+ return 0;
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "pre cal download procedure failed, try cal file: %d\n",
+ ret);
+
+ ret = ath10k_download_cal_file(ar, ar->cal_file);
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_FILE;
goto done;
"boot did not find a calibration file, try DT next: %d\n",
ret);
- ret = ath10k_download_cal_dt(ar);
+ ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data");
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_DT;
goto done;
case ATH10K_FW_WMI_OP_VERSION_10_1:
case ATH10K_FW_WMI_OP_VERSION_10_2:
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
- if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
+ if (ath10k_peer_stats_enabled(ar)) {
ar->max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS;
ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS;
} else {
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
- ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc;
- ar->fw_stats_req_mask = WMI_STAT_PEER;
+ ar->fw_stats_req_mask = WMI_10_4_STAT_PEER |
+ WMI_10_4_STAT_PEER_EXTD;
ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
+
+ if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL,
+ ar->fw_features))
+ ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC_PFC;
+ else
+ ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
return 0;
}
-int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
+int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
+ const struct ath10k_fw_components *fw)
{
int status;
+ u32 val;
lockdep_assert_held(&ar->conf_mutex);
clear_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
+ ar->running_fw = fw;
+
ath10k_bmi_start(ar);
if (ath10k_init_configure_target(ar)) {
}
}
- status = ath10k_download_fw(ar, mode);
+ status = ath10k_download_fw(ar);
if (status)
goto err;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n",
ar->hw->wiphy->fw_version);
+ if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map)) {
+ val = 0;
+ if (ath10k_peer_stats_enabled(ar))
+ val = WMI_10_4_PEER_STATS;
+
+ status = ath10k_mac_ext_resource_config(ar, val);
+ if (status) {
+ ath10k_err(ar,
+ "failed to send ext resource cfg command : %d\n",
+ status);
+ goto err_hif_stop;
+ }
+ }
+
status = ath10k_wmi_cmd_init(ar);
if (status) {
ath10k_err(ar, "could not send WMI init command (%d)\n",
ath10k_debug_print_hwfw_info(ar);
+ ret = ath10k_core_pre_cal_download(ar);
+ if (ret) {
+ /* pre calibration data download is not necessary
+ * for all the chipsets. Ignore failures and continue.
+ */
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "could not load pre cal data: %d\n", ret);
+ }
+
ret = ath10k_core_get_board_id_from_otp(ar);
if (ret && ret != -EOPNOTSUPP) {
ath10k_err(ar, "failed to get board id from otp: %d\n",
ret);
- return ret;
+ goto err_free_firmware_files;
}
ret = ath10k_core_fetch_board_file(ar);
mutex_lock(&ar->conf_mutex);
- ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
+ ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL,
+ &ar->normal_mode_fw);
if (ret) {
ath10k_err(ar, "could not init core (%d)\n", ret);
goto err_unlock;
mutex_init(&ar->conf_mutex);
spin_lock_init(&ar->data_lock);
+ spin_lock_init(&ar->txqs_lock);
+ INIT_LIST_HEAD(&ar->txqs);
INIT_LIST_HEAD(&ar->peers);
init_waitqueue_head(&ar->peer_mapping_wq);
init_waitqueue_head(&ar->htt.empty_tx_wq);
projects / cascardo / linux.git / blobdiff