if (ret)
return ret;
+ spin_lock_bh(&ar->data_lock);
peer->keys[i] = arvif->wep_keys[i];
+ spin_unlock_bh(&ar->data_lock);
}
return 0;
ath10k_warn(ar, "failed to remove peer wep key %d: %d\n",
i, ret);
+ spin_lock_bh(&ar->data_lock);
peer->keys[i] = NULL;
+ spin_unlock_bh(&ar->data_lock);
}
return first_errno;
}
+bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
+ u8 keyidx)
+{
+ struct ath10k_peer *peer;
+ int i;
+
+ lockdep_assert_held(&ar->data_lock);
+
+ /* We don't know which vdev this peer belongs to,
+ * since WMI doesn't give us that information.
+ *
+ * FIXME: multi-bss needs to be handled.
+ */
+ peer = ath10k_peer_find(ar, 0, addr);
+ if (!peer)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+ if (peer->keys[i] && peer->keys[i]->keyidx == keyidx)
+ return true;
+ }
+
+ return false;
+}
+
static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
struct ieee80211_key_conf *key)
{
lockdep_assert_held(&ar->conf_mutex);
+ if (ar->num_peers >= ar->max_num_peers)
+ return -ENOBUFS;
+
ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
if (ret) {
ath10k_warn(ar, "failed to create wmi peer %pM on vdev %i: %i\n",
addr, vdev_id, ret);
return ret;
}
- spin_lock_bh(&ar->data_lock);
+
ar->num_peers++;
- spin_unlock_bh(&ar->data_lock);
return 0;
}
return 0;
}
-static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
+static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
{
struct ath10k *ar = arvif->ar;
u32 vdev_param;
- if (value != 0xFFFFFFFF)
- value = min_t(u32, arvif->ar->hw->wiphy->rts_threshold,
- ATH10K_RTS_MAX);
-
vdev_param = ar->wmi.vdev_param->rts_threshold;
return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
}
if (ret)
return ret;
- spin_lock_bh(&ar->data_lock);
ar->num_peers--;
- spin_unlock_bh(&ar->data_lock);
return 0;
}
list_del(&peer->list);
kfree(peer);
}
- ar->num_peers = 0;
spin_unlock_bh(&ar->data_lock);
+
+ ar->num_peers = 0;
+ ar->num_stations = 0;
}
/************************/
lockdep_assert_held(&ar->conf_mutex);
+ if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
+ return -ESHUTDOWN;
+
ret = wait_for_completion_timeout(&ar->vdev_setup_done,
ATH10K_VDEV_SETUP_TIMEOUT_HZ);
if (ret == 0)
arg.channel.max_reg_power = channel->max_reg_power * 2;
arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
+ reinit_completion(&ar->vdev_setup_done);
+
ret = ath10k_wmi_vdev_start(ar, &arg);
if (ret) {
ath10k_warn(ar, "failed to request monitor vdev %i start: %d\n",
ath10k_warn(ar, "failed to put down monitor vdev %i: %d\n",
ar->monitor_vdev_id, ret);
+ reinit_completion(&ar->vdev_setup_done);
+
ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
if (ret)
ath10k_warn(ar, "failed to to request monitor vdev %i stop: %d\n",
}
}
+static bool ath10k_mac_need_offchan_tx_work(struct ath10k *ar)
+{
+ /* FIXME: Not really sure since when the behaviour changed. At some
+ * point new firmware stopped requiring creation of peer entries for
+ * offchannel tx (and actually creating them causes issues with wmi-htc
+ * tx credit replenishment and reliability). Assuming it's at least 3.4
+ * because that's when the `freq` was introduced to TX_FRM HTT command.
+ */
+ return !(ar->htt.target_version_major >= 3 &&
+ ar->htt.target_version_minor >= 4);
+}
+
static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
case ATH10K_SCAN_IDLE:
break;
case ATH10K_SCAN_RUNNING:
- case ATH10K_SCAN_ABORTING:
if (ar->scan.is_roc)
ieee80211_remain_on_channel_expired(ar->hw);
- else
+ case ATH10K_SCAN_ABORTING:
+ if (!ar->scan.is_roc)
ieee80211_scan_completed(ar->hw,
(ar->scan.state ==
ATH10K_SCAN_ABORTING));
if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
spin_lock_bh(&ar->data_lock);
- ATH10K_SKB_CB(skb)->htt.is_offchan = true;
+ ATH10K_SKB_CB(skb)->htt.freq = ar->scan.roc_freq;
ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id;
spin_unlock_bh(&ar->data_lock);
- ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %p\n",
- skb);
+ if (ath10k_mac_need_offchan_tx_work(ar)) {
+ ATH10K_SKB_CB(skb)->htt.freq = 0;
+ ATH10K_SKB_CB(skb)->htt.is_offchan = true;
- skb_queue_tail(&ar->offchan_tx_queue, skb);
- ieee80211_queue_work(hw, &ar->offchan_tx_work);
- return;
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %p\n",
+ skb);
+
+ skb_queue_tail(&ar->offchan_tx_queue, skb);
+ ieee80211_queue_work(hw, &ar->offchan_tx_work);
+ return;
+ }
}
ath10k_tx_htt(ar, skb);
}
/* Must not be called with conf_mutex held as workers can use that also. */
-static void ath10k_drain_tx(struct ath10k *ar)
+void ath10k_drain_tx(struct ath10k *ar)
{
/* make sure rcu-protected mac80211 tx path itself is drained */
synchronize_net();
return 0;
}
+static void ath10k_check_chain_mask(struct ath10k *ar, u32 cm, const char *dbg)
+{
+ /* It is not clear that allowing gaps in chainmask
+ * is helpful. Probably it will not do what user
+ * is hoping for, so warn in that case.
+ */
+ if (cm == 15 || cm == 7 || cm == 3 || cm == 1 || cm == 0)
+ return;
+
+ ath10k_warn(ar, "mac %s antenna chainmask may be invalid: 0x%x. Suggested values: 15, 7, 3, 1 or 0.\n",
+ dbg, cm);
+}
+
static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
{
int ret;
lockdep_assert_held(&ar->conf_mutex);
+ ath10k_check_chain_mask(ar, tx_ant, "tx");
+ ath10k_check_chain_mask(ar, rx_ant, "rx");
+
ar->cfg_tx_chainmask = tx_ant;
ar->cfg_rx_chainmask = rx_ant;
return ret;
}
+static u32 get_nss_from_chainmask(u16 chain_mask)
+{
+ if ((chain_mask & 0x15) == 0x15)
+ return 4;
+ else if ((chain_mask & 0x7) == 0x7)
+ return 3;
+ else if ((chain_mask & 0x3) == 0x3)
+ return 2;
+ return 1;
+}
+
/*
* TODO:
* Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
goto err_vdev_delete;
}
+ if (ar->cfg_tx_chainmask) {
+ u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
+ vdev_param = ar->wmi.vdev_param->nss;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ nss);
+ if (ret) {
+ ath10k_warn(ar, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n",
+ arvif->vdev_id, ar->cfg_tx_chainmask, nss,
+ ret);
+ goto err_vdev_delete;
+ }
+ }
+
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
if (ret) {
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
int ret;
- mutex_lock(&ar->conf_mutex);
-
cancel_work_sync(&arvif->wep_key_work);
+ mutex_lock(&ar->conf_mutex);
+
spin_lock_bh(&ar->data_lock);
ath10k_mac_vif_beacon_cleanup(arvif);
spin_unlock_bh(&ar->data_lock);
mutex_unlock(&ar->conf_mutex);
}
+static int ath10k_mac_inc_num_stations(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+ arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
+ return 0;
+
+ if (ar->num_stations >= ar->max_num_stations)
+ return -ENOBUFS;
+
+ ar->num_stations++;
+
+ return 0;
+}
+
+static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+ arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
+ return;
+
+ ar->num_stations--;
+}
+
static int ath10k_sta_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
- int max_num_peers;
int ret = 0;
if (old_state == IEEE80211_STA_NOTEXIST &&
/*
* New station addition.
*/
- if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
- max_num_peers = TARGET_10X_NUM_PEERS_MAX - 1;
- else
- max_num_peers = TARGET_NUM_PEERS;
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n",
+ arvif->vdev_id, sta->addr,
+ ar->num_stations + 1, ar->max_num_stations,
+ ar->num_peers + 1, ar->max_num_peers);
- if (ar->num_peers >= max_num_peers) {
- ath10k_warn(ar, "number of peers exceeded: peers number %d (max peers %d)\n",
- ar->num_peers, max_num_peers);
- ret = -ENOBUFS;
+ ret = ath10k_mac_inc_num_stations(arvif);
+ if (ret) {
+ ath10k_warn(ar, "refusing to associate station: too many connected already (%d)\n",
+ ar->max_num_stations);
goto exit;
}
- ath10k_dbg(ar, ATH10K_DBG_MAC,
- "mac vdev %d peer create %pM (new sta) num_peers %d\n",
- arvif->vdev_id, sta->addr, ar->num_peers);
-
ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
- if (ret)
+ if (ret) {
ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n",
sta->addr, arvif->vdev_id, ret);
+ ath10k_mac_dec_num_stations(arvif);
+ goto exit;
+ }
if (vif->type == NL80211_IFTYPE_STATION) {
WARN_ON(arvif->is_started);
arvif->vdev_id, ret);
WARN_ON(ath10k_peer_delete(ar, arvif->vdev_id,
sta->addr));
+ ath10k_mac_dec_num_stations(arvif);
goto exit;
}
ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
sta->addr, arvif->vdev_id, ret);
+ ath10k_mac_dec_num_stations(arvif);
} else if (old_state == IEEE80211_STA_AUTH &&
new_state == IEEE80211_STA_ASSOC &&
(vif->type == NL80211_IFTYPE_AP ||
if (ret)
goto exit;
+ duration = max(duration, WMI_SCAN_CHAN_MIN_TIME_MSEC);
+
memset(&arg, 0, sizeof(arg));
ath10k_wmi_start_scan_init(ar, &arg);
arg.vdev_id = arvif->vdev_id;
empty = (ar->htt.num_pending_tx == 0);
spin_unlock_bh(&ar->htt.tx_lock);
- skip = (ar->state == ATH10K_STATE_WEDGED);
+ skip = (ar->state == ATH10K_STATE_WEDGED) ||
+ test_bit(ATH10K_FLAG_CRASH_FLUSH,
+ &ar->dev_flags);
(empty || skip);
}), ATH10K_FLUSH_TIMEOUT_HZ);
}
#endif
-static void ath10k_restart_complete(struct ieee80211_hw *hw)
+static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
+ enum ieee80211_reconfig_type reconfig_type)
{
struct ath10k *ar = hw->priv;
+ if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
+ return;
+
mutex_lock(&ar->conf_mutex);
/* If device failed to restart it will be in a different state, e.g.
if (ar->state == ATH10K_STATE_RESTARTED) {
ath10k_info(ar, "device successfully recovered\n");
ar->state = ATH10K_STATE_ON;
+ ieee80211_wake_queues(ar->hw);
}
mutex_unlock(&ar->conf_mutex);
u32 legacy = 0x00ff;
u8 ht = 0xff, i;
u16 vht = 0x3ff;
+ u16 nrf = ar->num_rf_chains;
+
+ if (ar->cfg_tx_chainmask)
+ nrf = get_nss_from_chainmask(ar->cfg_tx_chainmask);
switch (band) {
case IEEE80211_BAND_2GHZ:
if (mask->control[band].legacy != legacy)
return false;
- for (i = 0; i < ar->num_rf_chains; i++)
+ for (i = 0; i < nrf; i++)
if (mask->control[band].ht_mcs[i] != ht)
return false;
- for (i = 0; i < ar->num_rf_chains; i++)
+ for (i = 0; i < nrf; i++)
if (mask->control[band].vht_mcs[i] != vht)
return false;
u8 fixed_nss = ar->num_rf_chains;
u8 force_sgi;
+ if (ar->cfg_tx_chainmask)
+ fixed_nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
force_sgi = mask->control[band].gi;
if (force_sgi == NL80211_TXRATE_FORCE_LGI)
return -EINVAL;
.tx_last_beacon = ath10k_tx_last_beacon,
.set_antenna = ath10k_set_antenna,
.get_antenna = ath10k_get_antenna,
- .restart_complete = ath10k_restart_complete,
+ .reconfig_complete = ath10k_reconfig_complete,
.get_survey = ath10k_get_survey,
.set_bitrate_mask = ath10k_set_bitrate_mask,
.sta_rc_update = ath10k_sta_rc_update,
IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_HAS_RATE_CONTROL |
- IEEE80211_HW_SUPPORTS_STATIC_SMPS |
IEEE80211_HW_AP_LINK_PS |
IEEE80211_HW_SPECTRUM_MGMT;
- /* MSDU can have HTT TX fragment pushed in front. The additional 4
- * bytes is used for padding/alignment if necessary. */
- ar->hw->extra_tx_headroom += sizeof(struct htt_data_tx_desc_frag)*2 + 4;
+ ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
- ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
+ ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
ar->hw->wiphy->max_remain_on_channel_duration = 5000;
ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
projects / cascardo / linux.git / blobdiff