int num);
static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info);
static void ath10k_pci_stop_ce(struct ath10k *ar);
+static void ath10k_pci_device_reset(struct ath10k *ar);
+static int ath10k_pci_reset_target(struct ath10k *ar);
static const struct ce_attr host_ce_config_wlan[] = {
/* host->target HTC control and raw streams */
ath10k_ce_per_engine_service(ar, pipe);
}
-static void ath10k_pci_hif_post_init(struct ath10k *ar,
- struct ath10k_hif_cb *callbacks)
+static void ath10k_pci_hif_set_callbacks(struct ath10k *ar,
+ struct ath10k_hif_cb *callbacks)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
ath10k_pci_process_ce(ar);
ath10k_pci_cleanup_ce(ar);
ath10k_pci_buffer_cleanup(ar);
- ath10k_pci_ce_deinit(ar);
}
static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar,
ath10k_pci_sleep(ar);
}
+static int ath10k_pci_hif_power_up(struct ath10k *ar)
+{
+ int ret;
+
+ /*
+ * Bring the target up cleanly.
+ *
+ * The target may be in an undefined state with an AUX-powered Target
+ * and a Host in WoW mode. If the Host crashes, loses power, or is
+ * restarted (without unloading the driver) then the Target is left
+ * (aux) powered and running. On a subsequent driver load, the Target
+ * is in an unexpected state. We try to catch that here in order to
+ * reset the Target and retry the probe.
+ */
+ ath10k_pci_device_reset(ar);
+
+ ret = ath10k_pci_reset_target(ar);
+ if (ret)
+ goto err;
+
+ if (ath10k_target_ps) {
+ ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n");
+ } else {
+ /* Force AWAKE forever */
+ ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n");
+ ath10k_do_pci_wake(ar);
+ }
+
+ ret = ath10k_pci_ce_init(ar);
+ if (ret)
+ goto err_ps;
+
+ ret = ath10k_pci_init_config(ar);
+ if (ret)
+ goto err_ce;
+
+ ret = ath10k_pci_wake_target_cpu(ar);
+ if (ret) {
+ ath10k_err("could not wake up target CPU (%d)\n", ret);
+ goto err_ce;
+ }
+
+ return 0;
+
+err_ce:
+ ath10k_pci_ce_deinit(ar);
+err_ps:
+ if (!ath10k_target_ps)
+ ath10k_do_pci_sleep(ar);
+err:
+ return ret;
+}
+
+static void ath10k_pci_hif_power_down(struct ath10k *ar)
+{
+ ath10k_pci_ce_deinit(ar);
+ if (!ath10k_target_ps)
+ ath10k_do_pci_sleep(ar);
+}
+
+#ifdef CONFIG_PM
+
+#define ATH10K_PCI_PM_CONTROL 0x44
+
+static int ath10k_pci_hif_suspend(struct ath10k *ar)
+{
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+ struct pci_dev *pdev = ar_pci->pdev;
+ u32 val;
+
+ pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+ if ((val & 0x000000ff) != 0x3) {
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+ (val & 0xffffff00) | 0x03);
+ }
+
+ return 0;
+}
+
+static int ath10k_pci_hif_resume(struct ath10k *ar)
+{
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+ struct pci_dev *pdev = ar_pci->pdev;
+ u32 val;
+
+ pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+ if ((val & 0x000000ff) != 0) {
+ pci_restore_state(pdev);
+ pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+ val & 0xffffff00);
+ /*
+ * Suspend/Resume resets the PCI configuration space,
+ * so we have to re-disable the RETRY_TIMEOUT register (0x41)
+ * to keep PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+ }
+
+ return 0;
+}
+#endif
+
static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
.send_head = ath10k_pci_hif_send_head,
.exchange_bmi_msg = ath10k_pci_hif_exchange_bmi_msg,
.map_service_to_pipe = ath10k_pci_hif_map_service_to_pipe,
.get_default_pipe = ath10k_pci_hif_get_default_pipe,
.send_complete_check = ath10k_pci_hif_send_complete_check,
- .init = ath10k_pci_hif_post_init,
+ .set_callbacks = ath10k_pci_hif_set_callbacks,
.get_free_queue_number = ath10k_pci_hif_get_free_queue_number,
+ .power_up = ath10k_pci_hif_power_up,
+ .power_down = ath10k_pci_hif_power_down,
+#ifdef CONFIG_PM
+ .suspend = ath10k_pci_hif_suspend,
+ .resume = ath10k_pci_hif_resume,
+#endif
};
static void ath10k_pci_ce_tasklet(unsigned long ptr)
return 0;
}
-static void ath10k_pci_device_reset(struct ath10k_pci *ar_pci)
+static void ath10k_pci_device_reset(struct ath10k *ar)
{
- struct ath10k *ar = ar_pci->ar;
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
void __iomem *mem = ar_pci->mem;
int i;
u32 val;
case ATH10K_PCI_FEATURE_MSI_X:
ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
break;
- case ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND:
+ case ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND:
ath10k_dbg(ATH10K_DBG_PCI, "QCA988X_1.0 workaround enabled\n");
break;
}
switch (pci_dev->device) {
case QCA988X_1_0_DEVICE_ID:
- set_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features);
+ set_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features);
break;
case QCA988X_2_0_DEVICE_ID:
set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features);
ath10k_pci_dump_features(ar_pci);
- ar = ath10k_core_create(ar_pci, ar_pci->dev, ATH10K_BUS_PCI,
- &ath10k_pci_hif_ops);
+ ar = ath10k_core_create(ar_pci, ar_pci->dev, &ath10k_pci_hif_ops);
if (!ar) {
ath10k_err("ath10k_core_create failed!\n");
ret = -EINVAL;
}
/* Enable QCA988X_1.0 HW workarounds */
- if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features))
+ if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features))
spin_lock_init(&ar_pci->hw_v1_workaround_lock);
ar_pci->ar = ar;
goto err_iomap;
}
- /*
- * Bring the target up cleanly.
- *
- * The target may be in an undefined state with an AUX-powered Target
- * and a Host in WoW mode. If the Host crashes, loses power, or is
- * restarted (without unloading the driver) then the Target is left
- * (aux) powered and running. On a subsequent driver load, the Target
- * is in an unexpected state. We try to catch that here in order to
- * reset the Target and retry the probe.
- */
- ath10k_pci_device_reset(ar_pci);
-
- ret = ath10k_pci_reset_target(ar);
- if (ret)
- goto err_intr;
-
- if (ath10k_target_ps) {
- ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n");
- } else {
- /* Force AWAKE forever */
- ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n");
- ath10k_do_pci_wake(ar);
- }
-
- ret = ath10k_pci_ce_init(ar);
- if (ret)
- goto err_intr;
-
- ret = ath10k_pci_init_config(ar);
- if (ret)
- goto err_ce;
-
- ret = ath10k_pci_wake_target_cpu(ar);
+ ret = ath10k_pci_hif_power_up(ar);
if (ret) {
- ath10k_err("could not wake up target CPU (%d)\n", ret);
- goto err_ce;
+ ath10k_err("could not start pci hif (%d)\n", ret);
+ goto err_intr;
}
ret = ath10k_core_register(ar);
if (ret) {
ath10k_err("could not register driver core (%d)\n", ret);
- goto err_ce;
+ goto err_hif;
}
return 0;
-err_ce:
- ath10k_pci_ce_deinit(ar);
+err_hif:
+ ath10k_pci_hif_power_down(ar);
err_intr:
ath10k_pci_stop_intr(ar);
err_iomap:
tasklet_kill(&ar_pci->msi_fw_err);
ath10k_core_unregister(ar);
+ ath10k_pci_hif_power_down(ar);
ath10k_pci_stop_intr(ar);
pci_set_drvdata(pdev, NULL);
kfree(ar_pci);
}
-#if defined(CONFIG_PM_SLEEP)
-
-#define ATH10K_PCI_PM_CONTROL 0x44
-
-static int ath10k_pci_suspend(struct device *device)
-{
- struct pci_dev *pdev = to_pci_dev(device);
- struct ath10k *ar = pci_get_drvdata(pdev);
- struct ath10k_pci *ar_pci;
- u32 val;
- int ret, retval;
-
- ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
-
- if (!ar)
- return -ENODEV;
-
- ar_pci = ath10k_pci_priv(ar);
- if (!ar_pci)
- return -ENODEV;
-
- if (ath10k_core_target_suspend(ar))
- return -EBUSY;
-
- ret = wait_event_interruptible_timeout(ar->event_queue,
- ar->is_target_paused == true,
- 1 * HZ);
- if (ret < 0) {
- ath10k_warn("suspend interrupted (%d)\n", ret);
- retval = ret;
- goto resume;
- } else if (ret == 0) {
- ath10k_warn("suspend timed out - target pause event never came\n");
- retval = EIO;
- goto resume;
- }
-
- /*
- * reset is_target_paused and host can check that in next time,
- * or it will always be TRUE and host just skip the waiting
- * condition, it causes target assert due to host already
- * suspend
- */
- ar->is_target_paused = false;
-
- pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
-
- if ((val & 0x000000ff) != 0x3) {
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
- (val & 0xffffff00) | 0x03);
- }
-
- return 0;
-resume:
- ret = ath10k_core_target_resume(ar);
- if (ret)
- ath10k_warn("could not resume (%d)\n", ret);
-
- return retval;
-}
-
-static int ath10k_pci_resume(struct device *device)
-{
- struct pci_dev *pdev = to_pci_dev(device);
- struct ath10k *ar = pci_get_drvdata(pdev);
- struct ath10k_pci *ar_pci;
- int ret;
- u32 val;
-
- ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
-
- if (!ar)
- return -ENODEV;
- ar_pci = ath10k_pci_priv(ar);
-
- if (!ar_pci)
- return -ENODEV;
-
- ret = pci_enable_device(pdev);
- if (ret) {
- ath10k_warn("cannot enable PCI device: %d\n", ret);
- return ret;
- }
-
- pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
-
- if ((val & 0x000000ff) != 0) {
- pci_restore_state(pdev);
- pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
- val & 0xffffff00);
- /*
- * Suspend/Resume resets the PCI configuration space,
- * so we have to re-disable the RETRY_TIMEOUT register (0x41)
- * to keep PCI Tx retries from interfering with C3 CPU state
- */
- pci_read_config_dword(pdev, 0x40, &val);
-
- if ((val & 0x0000ff00) != 0)
- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
- }
-
- ret = ath10k_core_target_resume(ar);
- if (ret)
- ath10k_warn("target resume failed: %d\n", ret);
-
- return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(ath10k_dev_pm_ops,
- ath10k_pci_suspend,
- ath10k_pci_resume);
-
-#define ATH10K_PCI_PM_OPS (&ath10k_dev_pm_ops)
-
-#else
-
-#define ATH10K_PCI_PM_OPS NULL
-
-#endif /* CONFIG_PM_SLEEP */
-
MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);
static struct pci_driver ath10k_pci_driver = {
.id_table = ath10k_pci_id_table,
.probe = ath10k_pci_probe,
.remove = ath10k_pci_remove,
- .driver.pm = ATH10K_PCI_PM_OPS,
};
static int __init ath10k_pci_init(void)
projects / cascardo / linux.git / blobdiff