*/
} __packed;
+/* This is the definition from 10.X firmware branch */
+struct wmi_start_scan_cmd_10x {
+ /* Scan ID */
+ __le32 scan_id;
+
+ /* Scan requestor ID */
+ __le32 scan_req_id;
+
+ /* VDEV id(interface) that is requesting scan */
+ __le32 vdev_id;
+
+ /* Scan Priority, input to scan scheduler */
+ __le32 scan_priority;
+
+ /* Scan events subscription */
+ __le32 notify_scan_events;
+
+ /* dwell time in msec on active channels */
+ __le32 dwell_time_active;
+
+ /* dwell time in msec on passive channels */
+ __le32 dwell_time_passive;
+
+ /*
+ * min time in msec on the BSS channel,only valid if atleast one
+ * VDEV is active
+ */
+ __le32 min_rest_time;
+
+ /*
+ * max rest time in msec on the BSS channel,only valid if at least
+ * one VDEV is active
+ */
+ /*
+ * the scanner will rest on the bss channel at least min_rest_time
+ * after min_rest_time the scanner will start checking for tx/rx
+ * activity on all VDEVs. if there is no activity the scanner will
+ * switch to off channel. if there is activity the scanner will let
+ * the radio on the bss channel until max_rest_time expires.at
+ * max_rest_time scanner will switch to off channel irrespective of
+ * activity. activity is determined by the idle_time parameter.
+ */
+ __le32 max_rest_time;
+
+ /*
+ * time before sending next set of probe requests.
+ * The scanner keeps repeating probe requests transmission with
+ * period specified by repeat_probe_time.
+ * The number of probe requests specified depends on the ssid_list
+ * and bssid_list
+ */
+ __le32 repeat_probe_time;
+
+ /* time in msec between 2 consequetive probe requests with in a set. */
+ __le32 probe_spacing_time;
+
+ /*
+ * data inactivity time in msec on bss channel that will be used by
+ * scanner for measuring the inactivity.
+ */
+ __le32 idle_time;
+
+ /* maximum time in msec allowed for scan */
+ __le32 max_scan_time;
+
+ /*
+ * delay in msec before sending first probe request after switching
+ * to a channel
+ */
+ __le32 probe_delay;
+
+ /* Scan control flags */
+ __le32 scan_ctrl_flags;
+
+ /*
+ * TLV (tag length value ) paramerters follow the scan_cmd structure.
+ * TLV can contain channel list, bssid list, ssid list and
+ * ie. the TLV tags are defined above;
+ */
+} __packed;
+
+
struct wmi_ssid_arg {
int len;
const u8 *ssid;
#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
+struct wmi_pdev_param_map {
+ u32 tx_chain_mask;
+ u32 rx_chain_mask;
+ u32 txpower_limit2g;
+ u32 txpower_limit5g;
+ u32 txpower_scale;
+ u32 beacon_gen_mode;
+ u32 beacon_tx_mode;
+ u32 resmgr_offchan_mode;
+ u32 protection_mode;
+ u32 dynamic_bw;
+ u32 non_agg_sw_retry_th;
+ u32 agg_sw_retry_th;
+ u32 sta_kickout_th;
+ u32 ac_aggrsize_scaling;
+ u32 ltr_enable;
+ u32 ltr_ac_latency_be;
+ u32 ltr_ac_latency_bk;
+ u32 ltr_ac_latency_vi;
+ u32 ltr_ac_latency_vo;
+ u32 ltr_ac_latency_timeout;
+ u32 ltr_sleep_override;
+ u32 ltr_rx_override;
+ u32 ltr_tx_activity_timeout;
+ u32 l1ss_enable;
+ u32 dsleep_enable;
+ u32 pcielp_txbuf_flush;
+ u32 pcielp_txbuf_watermark;
+ u32 pcielp_txbuf_tmo_en;
+ u32 pcielp_txbuf_tmo_value;
+ u32 pdev_stats_update_period;
+ u32 vdev_stats_update_period;
+ u32 peer_stats_update_period;
+ u32 bcnflt_stats_update_period;
+ u32 pmf_qos;
+ u32 arp_ac_override;
+ u32 arpdhcp_ac_override;
+ u32 dcs;
+ u32 ani_enable;
+ u32 ani_poll_period;
+ u32 ani_listen_period;
+ u32 ani_ofdm_level;
+ u32 ani_cck_level;
+ u32 dyntxchain;
+ u32 proxy_sta;
+ u32 idle_ps_config;
+ u32 power_gating_sleep;
+ u32 fast_channel_reset;
+ u32 burst_dur;
+ u32 burst_enable;
+};
+
+#define WMI_PDEV_PARAM_UNSUPPORTED 0
+
enum wmi_pdev_param {
/* TX chian mask */
WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
WMI_PDEV_PARAM_POWER_GATING_SLEEP,
};
+enum wmi_10x_pdev_param {
+ /* TX chian mask */
+ WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+ /* RX chian mask */
+ WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
+ /* TX power limit for 2G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
+ /* TX power limit for 5G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
+ /* TX power scale */
+ WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
+ /* Beacon generation mode . 0: host, 1: target */
+ WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
+ /* Beacon generation mode . 0: staggered 1: bursted */
+ WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
+ /*
+ * Resource manager off chan mode .
+ * 0: turn off off chan mode. 1: turn on offchan mode
+ */
+ WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ /*
+ * Protection mode:
+ * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
+ */
+ WMI_10X_PDEV_PARAM_PROTECTION_MODE,
+ /* Dynamic bandwidth 0: disable 1: enable */
+ WMI_10X_PDEV_PARAM_DYNAMIC_BW,
+ /* Non aggregrate/ 11g sw retry threshold.0-disable */
+ WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ /* aggregrate sw retry threshold. 0-disable*/
+ WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
+ /* Station kickout threshold (non of consecutive failures).0-disable */
+ WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
+ /* Aggerate size scaling configuration per AC */
+ WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ /* LTR enable */
+ WMI_10X_PDEV_PARAM_LTR_ENABLE,
+ /* LTR latency for BE, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ /* LTR latency for BK, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ /* LTR latency for VI, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ /* LTR latency for VO, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ /* LTR AC latency timeout, in ms */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ /* LTR platform latency override, in us */
+ WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ /* LTR-RX override, in us */
+ WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
+ /* Tx activity timeout for LTR, in us */
+ WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ /* L1SS state machine enable */
+ WMI_10X_PDEV_PARAM_L1SS_ENABLE,
+ /* Deep sleep state machine enable */
+ WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
+ /* pdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ /* vdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ /* peer level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ /* beacon filter status update period */
+ WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
+ WMI_10X_PDEV_PARAM_PMF_QOS,
+ /* Access category on which ARP and DHCP frames are sent */
+ WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
+ /* DCS configuration */
+ WMI_10X_PDEV_PARAM_DCS,
+ /* Enable/Disable ANI on target */
+ WMI_10X_PDEV_PARAM_ANI_ENABLE,
+ /* configure the ANI polling period */
+ WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
+ /* configure the ANI listening period */
+ WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ /* configure OFDM immunity level */
+ WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
+ /* configure CCK immunity level */
+ WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
+ /* Enable/Disable CDD for 1x1 STAs in rate control module */
+ WMI_10X_PDEV_PARAM_DYNTXCHAIN,
+ /* Enable/Disable Fast channel reset*/
+ WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
+ /* Set Bursting DUR */
+ WMI_10X_PDEV_PARAM_BURST_DUR,
+ /* Set Bursting Enable*/
+ WMI_10X_PDEV_PARAM_BURST_ENABLE,
+};
+
struct wmi_pdev_set_param_cmd {
__le32 param_id;
__le32 param_value;
int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
u16 rd5g, u16 ctl2g, u16 ctl5g);
-int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
- u32 value);
+int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value);
int ath10k_wmi_cmd_init(struct ath10k *ar);
int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *);
void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
projects / cascardo / linux.git / blobdiff