unsigned int debug_mask;
static unsigned int testmode;
static bool suspend_cutpower;
+static unsigned int uart_debug;
module_param(debug_mask, uint, 0644);
module_param(testmode, uint, 0644);
module_param(suspend_cutpower, bool, 0444);
+module_param(uart_debug, uint, 0644);
static const struct ath6kl_hw hw_list[] = {
{
/* hw2.0 needs override address hardcoded */
.app_start_override_addr = 0x944C00,
- .fw_otp = AR6003_HW_2_0_OTP_FILE,
- .fw = AR6003_HW_2_0_FIRMWARE_FILE,
- .fw_tcmd = AR6003_HW_2_0_TCMD_FIRMWARE_FILE,
- .fw_patch = AR6003_HW_2_0_PATCH_FILE,
- .fw_api2 = AR6003_HW_2_0_FIRMWARE_2_FILE,
+ .fw = {
+ .dir = AR6003_HW_2_0_FW_DIR,
+ .otp = AR6003_HW_2_0_OTP_FILE,
+ .fw = AR6003_HW_2_0_FIRMWARE_FILE,
+ .tcmd = AR6003_HW_2_0_TCMD_FIRMWARE_FILE,
+ .patch = AR6003_HW_2_0_PATCH_FILE,
+ },
+
.fw_board = AR6003_HW_2_0_BOARD_DATA_FILE,
.fw_default_board = AR6003_HW_2_0_DEFAULT_BOARD_DATA_FILE,
},
.refclk_hz = 26000000,
.uarttx_pin = 8,
- .fw_otp = AR6003_HW_2_1_1_OTP_FILE,
- .fw = AR6003_HW_2_1_1_FIRMWARE_FILE,
- .fw_tcmd = AR6003_HW_2_1_1_TCMD_FIRMWARE_FILE,
- .fw_patch = AR6003_HW_2_1_1_PATCH_FILE,
- .fw_api2 = AR6003_HW_2_1_1_FIRMWARE_2_FILE,
+ .fw = {
+ .dir = AR6003_HW_2_1_1_FW_DIR,
+ .otp = AR6003_HW_2_1_1_OTP_FILE,
+ .fw = AR6003_HW_2_1_1_FIRMWARE_FILE,
+ .tcmd = AR6003_HW_2_1_1_TCMD_FIRMWARE_FILE,
+ .patch = AR6003_HW_2_1_1_PATCH_FILE,
+ },
+
.fw_board = AR6003_HW_2_1_1_BOARD_DATA_FILE,
.fw_default_board = AR6003_HW_2_1_1_DEFAULT_BOARD_DATA_FILE,
},
.refclk_hz = 26000000,
.uarttx_pin = 11,
- .fw = AR6004_HW_1_0_FIRMWARE_FILE,
- .fw_api2 = AR6004_HW_1_0_FIRMWARE_2_FILE,
+ .fw = {
+ .dir = AR6004_HW_1_0_FW_DIR,
+ .fw = AR6004_HW_1_0_FIRMWARE_FILE,
+ },
+
.fw_board = AR6004_HW_1_0_BOARD_DATA_FILE,
.fw_default_board = AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE,
},
.refclk_hz = 40000000,
.uarttx_pin = 11,
- .fw = AR6004_HW_1_1_FIRMWARE_FILE,
- .fw_api2 = AR6004_HW_1_1_FIRMWARE_2_FILE,
+ .fw = {
+ .dir = AR6004_HW_1_1_FW_DIR,
+ .fw = AR6004_HW_1_1_FIRMWARE_FILE,
+ },
+
.fw_board = AR6004_HW_1_1_BOARD_DATA_FILE,
.fw_default_board = AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE,
},
u8 fw_iftype, fw_mode = 0, fw_submode = 0;
int i, status;
+ param = uart_debug;
+ if (ath6kl_bmi_write(ar, ath6kl_get_hi_item_addr(ar,
+ HI_ITEM(hi_serial_enable)), (u8 *)¶m, 4)) {
+ ath6kl_err("bmi_write_memory for uart debug failed\n");
+ return -EIO;
+ }
+
/*
* Note: Even though the firmware interface type is
* chosen as BSS_STA for all three interfaces, can
}
#ifdef CONFIG_OF
-static const char *get_target_ver_dir(const struct ath6kl *ar)
-{
- switch (ar->version.target_ver) {
- case AR6003_HW_1_0_VERSION:
- return "ath6k/AR6003/hw1.0";
- case AR6003_HW_2_0_VERSION:
- return "ath6k/AR6003/hw2.0";
- case AR6003_HW_2_1_1_VERSION:
- return "ath6k/AR6003/hw2.1.1";
- }
- ath6kl_warn("%s: unsupported target version 0x%x.\n", __func__,
- ar->version.target_ver);
- return NULL;
-}
-
/*
* Check the device tree for a board-id and use it to construct
* the pathname to the firmware file. Used (for now) to find a
continue;
}
snprintf(board_filename, sizeof(board_filename),
- "%s/bdata.%s.bin", get_target_ver_dir(ar), board_id);
+ "%s/bdata.%s.bin", ar->hw.fw.dir, board_id);
ret = ath6kl_get_fw(ar, board_filename, &ar->fw_board,
&ar->fw_board_len);
static int ath6kl_fetch_otp_file(struct ath6kl *ar)
{
- const char *filename;
+ char filename[100];
int ret;
if (ar->fw_otp != NULL)
return 0;
- if (ar->hw.fw_otp == NULL) {
+ if (ar->hw.fw.otp == NULL) {
ath6kl_dbg(ATH6KL_DBG_BOOT,
"no OTP file configured for this hw\n");
return 0;
}
- filename = ar->hw.fw_otp;
+ snprintf(filename, sizeof(filename), "%s/%s",
+ ar->hw.fw.dir, ar->hw.fw.otp);
ret = ath6kl_get_fw(ar, filename, &ar->fw_otp,
&ar->fw_otp_len);
static int ath6kl_fetch_fw_file(struct ath6kl *ar)
{
- const char *filename;
+ char filename[100];
int ret;
if (ar->fw != NULL)
return 0;
if (testmode) {
- if (ar->hw.fw_tcmd == NULL) {
+ if (ar->hw.fw.tcmd == NULL) {
ath6kl_warn("testmode not supported\n");
return -EOPNOTSUPP;
}
- filename = ar->hw.fw_tcmd;
+ snprintf(filename, sizeof(filename), "%s/%s",
+ ar->hw.fw.dir, ar->hw.fw.tcmd);
set_bit(TESTMODE, &ar->flag);
goto get_fw;
}
- if (WARN_ON(ar->hw.fw == NULL))
+ /* FIXME: remove WARN_ON() as we won't support FW API 1 for long */
+ if (WARN_ON(ar->hw.fw.fw == NULL))
return -EINVAL;
- filename = ar->hw.fw;
+ snprintf(filename, sizeof(filename), "%s/%s",
+ ar->hw.fw.dir, ar->hw.fw.fw);
get_fw:
ret = ath6kl_get_fw(ar, filename, &ar->fw, &ar->fw_len);
static int ath6kl_fetch_patch_file(struct ath6kl *ar)
{
- const char *filename;
+ char filename[100];
int ret;
if (ar->fw_patch != NULL)
return 0;
- if (ar->hw.fw_patch == NULL)
+ if (ar->hw.fw.patch == NULL)
return 0;
- filename = ar->hw.fw_patch;
+ snprintf(filename, sizeof(filename), "%s/%s",
+ ar->hw.fw.dir, ar->hw.fw.patch);
ret = ath6kl_get_fw(ar, filename, &ar->fw_patch,
&ar->fw_patch_len);
return 0;
}
-static int ath6kl_fetch_fw_api2(struct ath6kl *ar)
+static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
{
size_t magic_len, len, ie_len;
const struct firmware *fw;
struct ath6kl_fw_ie *hdr;
- const char *filename;
+ char filename[100];
const u8 *data;
int ret, ie_id, i, index, bit;
__le32 *val;
- if (ar->hw.fw_api2 == NULL)
- return -EOPNOTSUPP;
-
- filename = ar->hw.fw_api2;
+ snprintf(filename, sizeof(filename), "%s/%s", ar->hw.fw.dir, name);
ret = request_firmware(&fw, filename, ar->dev);
if (ret)
if (ret)
return ret;
- ret = ath6kl_fetch_fw_api2(ar);
+ ret = ath6kl_fetch_fw_apin(ar, ATH6KL_FW_API3_FILE);
if (ret == 0) {
- ath6kl_dbg(ATH6KL_DBG_BOOT, "using fw api 2\n");
- return 0;
+ ar->fw_api = 3;
+ goto out;
+ }
+
+ ret = ath6kl_fetch_fw_apin(ar, ATH6KL_FW_API2_FILE);
+ if (ret == 0) {
+ ar->fw_api = 2;
+ goto out;
}
ret = ath6kl_fetch_fw_api1(ar);
if (ret)
return ret;
- ath6kl_dbg(ATH6KL_DBG_BOOT, "using fw api 1\n");
+ ar->fw_api = 1;
+
+out:
+ ath6kl_dbg(ATH6KL_DBG_BOOT, "using fw api %d\n", ar->fw_api);
return 0;
}
if (test_and_clear_bit(FIRST_BOOT, &ar->flag)) {
- ath6kl_info("%s %s fw %s%s\n",
+ ath6kl_info("%s %s fw %s api %d%s\n",
ar->hw.name,
ath6kl_init_get_hif_name(ar->hif_type),
ar->wiphy->fw_version,
+ ar->fw_api,
test_bit(TESTMODE, &ar->flag) ? " testmode" : "");
}
set_bit(FIRST_BOOT, &ar->flag);
+ ndev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
ret = ath6kl_init_hw_start(ar);
if (ret) {
ath6kl_err("Failed to start hardware: %d\n", ret);
projects / cascardo / linux.git / blobdiff