RATETAB_ENT(BRCM_RATE_54M, 0),
};
-#define wl_a_rates (__wl_rates + 4)
-#define wl_a_rates_size 8
#define wl_g_rates (__wl_rates + 0)
-#define wl_g_rates_size 12
+#define wl_g_rates_size ARRAY_SIZE(__wl_rates)
+#define wl_a_rates (__wl_rates + 4)
+#define wl_a_rates_size (wl_g_rates_size - 4)
+
+#define CHAN2G(_channel, _freq) { \
+ .band = IEEE80211_BAND_2GHZ, \
+ .center_freq = (_freq), \
+ .hw_value = (_channel), \
+ .flags = IEEE80211_CHAN_DISABLED, \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+#define CHAN5G(_channel) { \
+ .band = IEEE80211_BAND_5GHZ, \
+ .center_freq = 5000 + (5 * (_channel)), \
+ .hw_value = (_channel), \
+ .flags = IEEE80211_CHAN_DISABLED, \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+static struct ieee80211_channel __wl_2ghz_channels[] = {
+ CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427),
+ CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447),
+ CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467),
+ CHAN2G(13, 2472), CHAN2G(14, 2484)
+};
+
+static struct ieee80211_channel __wl_5ghz_channels[] = {
+ CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42),
+ CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56),
+ CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108),
+ CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128),
+ CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149),
+ CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165)
+};
/* Band templates duplicated per wiphy. The channel info
- * is filled in after querying the device.
+ * above is added to the band during setup.
*/
static const struct ieee80211_supported_band __wl_band_2ghz = {
.band = IEEE80211_BAND_2GHZ,
.n_bitrates = wl_g_rates_size,
};
-static const struct ieee80211_supported_band __wl_band_5ghz_a = {
+static const struct ieee80211_supported_band __wl_band_5ghz = {
.band = IEEE80211_BAND_5GHZ,
.bitrates = wl_a_rates,
.n_bitrates = wl_a_rates_size,
}
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state);
cfg80211_disconnected(vif->wdev.netdev, reason, NULL, 0,
- GFP_KERNEL);
+ true, GFP_KERNEL);
}
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state);
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state);
- cfg80211_disconnected(ndev, reason_code, NULL, 0, GFP_KERNEL);
+ cfg80211_disconnected(ndev, reason_code, NULL, 0, true, GFP_KERNEL);
memcpy(&scbval.ea, &profile->bssid, ETH_ALEN);
scbval.val = cpu_to_le32(reason_code);
return err;
}
-/* Filter the list of channels received from firmware counting only
- * the 20MHz channels. The wiphy band data only needs those which get
- * flagged to indicate if they can take part in higher bandwidth.
- */
-static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
- struct brcmf_chanspec_list *chlist,
- u32 chcnt[])
-{
- u32 total = le32_to_cpu(chlist->count);
- struct brcmu_chan ch;
- int i;
-
- for (i = 0; i < total; i++) {
- ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
- cfg->d11inf.decchspec(&ch);
-
- /* Firmware gives a ordered list. We skip non-20MHz
- * channels is 2G. For 5G we can abort upon reaching
- * a non-20MHz channel in the list.
- */
- if (ch.bw != BRCMU_CHAN_BW_20) {
- if (ch.band == BRCMU_CHAN_BAND_5G)
- break;
- else
- continue;
- }
-
- if (ch.band == BRCMU_CHAN_BAND_2G)
- chcnt[0] += 1;
- else if (ch.band == BRCMU_CHAN_BAND_5G)
- chcnt[1] += 1;
- }
-}
-
static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel,
struct brcmu_chan *ch)
{
u32 i, j;
u32 total;
u32 chaninfo;
- u32 chcnt[2] = { 0, 0 };
u32 index;
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
goto fail_pbuf;
}
- brcmf_count_20mhz_channels(cfg, list, chcnt);
wiphy = cfg_to_wiphy(cfg);
- if (chcnt[0]) {
- band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
- GFP_KERNEL);
- if (band == NULL) {
- err = -ENOMEM;
- goto fail_pbuf;
- }
- band->channels = kcalloc(chcnt[0], sizeof(*channel),
- GFP_KERNEL);
- if (band->channels == NULL) {
- kfree(band);
- err = -ENOMEM;
- goto fail_pbuf;
- }
- band->n_channels = 0;
- wiphy->bands[IEEE80211_BAND_2GHZ] = band;
- }
- if (chcnt[1]) {
- band = kmemdup(&__wl_band_5ghz_a, sizeof(__wl_band_5ghz_a),
- GFP_KERNEL);
- if (band == NULL) {
- err = -ENOMEM;
- goto fail_band2g;
- }
- band->channels = kcalloc(chcnt[1], sizeof(*channel),
- GFP_KERNEL);
- if (band->channels == NULL) {
- kfree(band);
- err = -ENOMEM;
- goto fail_band2g;
- }
- band->n_channels = 0;
- wiphy->bands[IEEE80211_BAND_5GHZ] = band;
- }
+ band = wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (band)
+ for (i = 0; i < band->n_channels; i++)
+ band->channels[i].flags = IEEE80211_CHAN_DISABLED;
+ band = wiphy->bands[IEEE80211_BAND_5GHZ];
+ if (band)
+ for (i = 0; i < band->n_channels; i++)
+ band->channels[i].flags = IEEE80211_CHAN_DISABLED;
total = le32_to_cpu(list->count);
for (i = 0; i < total; i++) {
brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec);
continue;
}
+ if (!band)
+ continue;
if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) &&
ch.bw == BRCMU_CHAN_BW_40)
continue;
} else if (ch.bw == BRCMU_CHAN_BW_40) {
brcmf_update_bw40_channel_flag(&channel[index], &ch);
} else {
- /* disable other bandwidths for now as mentioned
- * order assure they are enabled for subsequent
- * chanspecs.
+ /* enable the channel and disable other bandwidths
+ * for now as mentioned order assure they are enabled
+ * for subsequent chanspecs.
*/
channel[index].flags = IEEE80211_CHAN_NO_HT40 |
IEEE80211_CHAN_NO_80MHZ;
IEEE80211_CHAN_NO_IR;
}
}
- if (index == band->n_channels)
- band->n_channels++;
}
- kfree(pbuf);
- return 0;
-fail_band2g:
- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]);
- wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
fail_pbuf:
kfree(pbuf);
return err;
static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
{
+ struct ieee80211_supported_band *band;
struct ieee80211_iface_combination ifc_combo;
+ __le32 bandlist[3];
+ u32 n_bands;
+ int err, i;
+
wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
wiphy->mgmt_stypes = brcmf_txrx_stypes;
wiphy->max_remain_on_channel_duration = 5000;
- brcmf_wiphy_pno_params(wiphy);
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO))
+ brcmf_wiphy_pno_params(wiphy);
/* vendor commands/events support */
wiphy->vendor_commands = brcmf_vendor_cmds;
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL))
brcmf_wiphy_wowl_params(wiphy);
- return brcmf_setup_wiphybands(wiphy);
+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
+ sizeof(bandlist));
+ if (err) {
+ brcmf_err("could not obtain band info: err=%d\n", err);
+ return err;
+ }
+ /* first entry in bandlist is number of bands */
+ n_bands = le32_to_cpu(bandlist[0]);
+ for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) {
+ if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) {
+ band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
+ GFP_KERNEL);
+ if (!band)
+ return -ENOMEM;
+
+ band->channels = kmemdup(&__wl_2ghz_channels,
+ sizeof(__wl_2ghz_channels),
+ GFP_KERNEL);
+ if (!band->channels) {
+ kfree(band);
+ return -ENOMEM;
+ }
+
+ band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
+ wiphy->bands[IEEE80211_BAND_2GHZ] = band;
+ }
+ if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) {
+ band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz),
+ GFP_KERNEL);
+ if (!band)
+ return -ENOMEM;
+
+ band->channels = kmemdup(&__wl_5ghz_channels,
+ sizeof(__wl_5ghz_channels),
+ GFP_KERNEL);
+ if (!band->channels) {
+ kfree(band);
+ return -ENOMEM;
+ }
+
+ band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
+ wiphy->bands[IEEE80211_BAND_5GHZ] = band;
+ }
+ }
+ err = brcmf_setup_wiphybands(wiphy);
+ return err;
}
static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
memset(&ccreq, 0, sizeof(ccreq));
ccreq.rev = cpu_to_le32(-1);
memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2));
- brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
+ if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) {
+ brcmf_err("firmware rejected country setting\n");
+ return;
+ }
+ brcmf_setup_wiphybands(wiphy);
}
static void brcmf_free_wiphy(struct wiphy *wiphy)
{
+ if (!wiphy)
+ return;
+
kfree(wiphy->iface_combinations);
if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
projects / cascardo / linux.git / blobdiff