#include <linux/vmalloc.h>
#include <brcmu_utils.h>
+#include <brcm_hw_ids.h>
#include <brcmu_wifi.h>
-#include <dhd_bus.h>
-#include <dhd_dbg.h>
-
+#include "bus.h"
+#include "debug.h"
#include "firmware.h"
-#include "usb_rdl.h"
#include "usb.h"
-#define IOCTL_RESP_TIMEOUT 2000
+
+#define IOCTL_RESP_TIMEOUT 2000
#define BRCMF_USB_RESET_GETVER_SPINWAIT 100 /* in unit of ms */
#define BRCMF_USB_RESET_GETVER_LOOP_CNT 10
#define BRCMF_POSTBOOT_ID 0xA123 /* ID to detect if dongle
has boot up */
-#define BRCMF_USB_NRXQ 50
-#define BRCMF_USB_NTXQ 50
+#define BRCMF_USB_NRXQ 50
+#define BRCMF_USB_NTXQ 50
+
+#define BRCMF_USB_CBCTL_WRITE 0
+#define BRCMF_USB_CBCTL_READ 1
+#define BRCMF_USB_MAX_PKT_SIZE 1600
+
+#define BRCMF_USB_43143_FW_NAME "brcm/brcmfmac43143.bin"
+#define BRCMF_USB_43236_FW_NAME "brcm/brcmfmac43236b.bin"
+#define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin"
+#define BRCMF_USB_43569_FW_NAME "brcm/brcmfmac43569.bin"
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_MAX_OFFSET 3 /* Max number of file offsets */
+#define TRX_UNCOMP_IMAGE 0x20 /* Trx holds uncompressed img */
+#define TRX_RDL_CHUNK 1500 /* size of each dl transfer */
+#define TRX_OFFSETS_DLFWLEN_IDX 0
+
+/* Control messages: bRequest values */
+#define DL_GETSTATE 0 /* returns the rdl_state_t struct */
+#define DL_CHECK_CRC 1 /* currently unused */
+#define DL_GO 2 /* execute downloaded image */
+#define DL_START 3 /* initialize dl state */
+#define DL_REBOOT 4 /* reboot the device in 2 seconds */
+#define DL_GETVER 5 /* returns the bootrom_id_t struct */
+#define DL_GO_PROTECTED 6 /* execute the downloaded code and set reset
+ * event to occur in 2 seconds. It is the
+ * responsibility of the downloaded code to
+ * clear this event
+ */
+#define DL_EXEC 7 /* jump to a supplied address */
+#define DL_RESETCFG 8 /* To support single enum on dongle
+ * - Not used by bootloader
+ */
+#define DL_DEFER_RESP_OK 9 /* Potentially defer the response to setup
+ * if resp unavailable
+ */
+
+/* states */
+#define DL_WAITING 0 /* waiting to rx first pkt */
+#define DL_READY 1 /* hdr was good, waiting for more of the
+ * compressed image
+ */
+#define DL_BAD_HDR 2 /* hdr was corrupted */
+#define DL_BAD_CRC 3 /* compressed image was corrupted */
+#define DL_RUNNABLE 4 /* download was successful,waiting for go cmd */
+#define DL_START_FAIL 5 /* failed to initialize correctly */
+#define DL_NVRAM_TOOBIG 6 /* host specified nvram data exceeds DL_NVRAM
+ * value
+ */
+#define DL_IMAGE_TOOBIG 7 /* firmware image too big */
-#define CONFIGDESC(usb) (&((usb)->actconfig)->desc)
-#define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)])
-#define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0])
-#define IFDESC(usb, idx) IFALTS((usb), (idx)).desc
-#define IFEPDESC(usb, idx, ep) (IFALTS((usb), (idx)).endpoint[(ep)]).desc
-#define CONTROL_IF 0
-#define BULK_IF 0
+struct trx_header_le {
+ __le32 magic; /* "HDR0" */
+ __le32 len; /* Length of file including header */
+ __le32 crc32; /* CRC from flag_version to end of file */
+ __le32 flag_version; /* 0:15 flags, 16:31 version */
+ __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of
+ * header
+ */
+};
-#define BRCMF_USB_CBCTL_WRITE 0
-#define BRCMF_USB_CBCTL_READ 1
-#define BRCMF_USB_MAX_PKT_SIZE 1600
+struct rdl_state_le {
+ __le32 state;
+ __le32 bytes;
+};
-#define BRCMF_USB_43143_FW_NAME "brcm/brcmfmac43143.bin"
-#define BRCMF_USB_43236_FW_NAME "brcm/brcmfmac43236b.bin"
-#define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin"
+struct bootrom_id_le {
+ __le32 chip; /* Chip id */
+ __le32 chiprev; /* Chip rev */
+ __le32 ramsize; /* Size of RAM */
+ __le32 remapbase; /* Current remap base address */
+ __le32 boardtype; /* Type of board */
+ __le32 boardrev; /* Board revision */
+};
struct brcmf_usb_image {
struct list_head list;
struct list_head rx_postq;
struct list_head tx_freeq;
struct list_head tx_postq;
- uint rx_pipe, tx_pipe, rx_pipe2;
+ uint rx_pipe, tx_pipe;
int rx_low_watermark;
int tx_low_watermark;
int ctl_completed;
wait_queue_head_t ioctl_resp_wait;
ulong ctl_op;
+ u8 ifnum;
struct urb *bulk_urb; /* used for FW download */
+
+ bool wowl_enabled;
};
static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
static int brcmf_usb_up(struct device *dev)
{
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
- u16 ifnum;
brcmf_dbg(USB, "Enter\n");
if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP)
devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0);
devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0);
- ifnum = IFDESC(devinfo->usbdev, CONTROL_IF).bInterfaceNumber;
-
/* CTL Write */
devinfo->ctl_write.bRequestType =
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
devinfo->ctl_write.bRequest = 0;
devinfo->ctl_write.wValue = cpu_to_le16(0);
- devinfo->ctl_write.wIndex = cpu_to_le16p(&ifnum);
+ devinfo->ctl_write.wIndex = cpu_to_le16(devinfo->ifnum);
/* CTL Read */
devinfo->ctl_read.bRequestType =
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
devinfo->ctl_read.bRequest = 1;
devinfo->ctl_read.wValue = cpu_to_le16(0);
- devinfo->ctl_read.wIndex = cpu_to_le16p(&ifnum);
+ devinfo->ctl_read.wIndex = cpu_to_le16(devinfo->ifnum);
}
brcmf_usb_rx_fill_all(devinfo);
return 0;
}
+static void brcmf_cancel_all_urbs(struct brcmf_usbdev_info *devinfo)
+{
+ if (devinfo->ctl_urb)
+ usb_kill_urb(devinfo->ctl_urb);
+ if (devinfo->bulk_urb)
+ usb_kill_urb(devinfo->bulk_urb);
+ brcmf_usb_free_q(&devinfo->tx_postq, true);
+ brcmf_usb_free_q(&devinfo->rx_postq, true);
+}
+
static void brcmf_usb_down(struct device *dev)
{
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN);
- if (devinfo->ctl_urb)
- usb_kill_urb(devinfo->ctl_urb);
-
- if (devinfo->bulk_urb)
- usb_kill_urb(devinfo->bulk_urb);
- brcmf_usb_free_q(&devinfo->tx_postq, true);
-
- brcmf_usb_free_q(&devinfo->rx_postq, true);
+ brcmf_cancel_all_urbs(devinfo);
}
static void
brcmf_usb_ioctl_resp_wake(devinfo);
}
-static bool brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
- void *buffer, int buflen)
+static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
+ void *buffer, int buflen)
{
- int ret = 0;
+ int ret;
char *tmpbuf;
u16 size;
if ((!devinfo) || (devinfo->ctl_urb == NULL))
- return false;
+ return -EINVAL;
tmpbuf = kmalloc(buflen, GFP_ATOMIC);
if (!tmpbuf)
- return false;
+ return -ENOMEM;
size = buflen;
devinfo->ctl_urb->transfer_buffer_length = size;
ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
if (ret < 0) {
brcmf_err("usb_submit_urb failed %d\n", ret);
- kfree(tmpbuf);
- return false;
+ goto finalize;
}
- ret = brcmf_usb_ioctl_resp_wait(devinfo);
- memcpy(buffer, tmpbuf, buflen);
- kfree(tmpbuf);
+ if (!brcmf_usb_ioctl_resp_wait(devinfo)) {
+ usb_kill_urb(devinfo->ctl_urb);
+ ret = -ETIMEDOUT;
+ } else {
+ memcpy(buffer, tmpbuf, buflen);
+ }
+finalize:
+ kfree(tmpbuf);
return ret;
}
{
struct bootrom_id_le id;
u32 loop_cnt;
+ int err;
brcmf_dbg(USB, "Enter\n");
mdelay(BRCMF_USB_RESET_GETVER_SPINWAIT);
loop_cnt++;
id.chip = cpu_to_le32(0xDEAD); /* Get the ID */
- brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
+ err = brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
+ if ((err) && (err != -ETIMEDOUT))
+ return err;
if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID))
break;
} while (loop_cnt < BRCMF_USB_RESET_GETVER_LOOP_CNT);
brcmf_dbg(USB, "Enter, fw %p, len %d\n", fw, fwlen);
- bulkchunk = kmalloc(RDL_CHUNK, GFP_ATOMIC);
+ bulkchunk = kmalloc(TRX_RDL_CHUNK, GFP_ATOMIC);
if (bulkchunk == NULL) {
err = -ENOMEM;
goto fail;
}
/* 1) Prepare USB boot loader for runtime image */
- brcmf_usb_dl_cmd(devinfo, DL_START, &state,
- sizeof(struct rdl_state_le));
+ brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
rdlstate = le32_to_cpu(state.state);
rdlbytes = le32_to_cpu(state.bytes);
/* Wait until the usb device reports it received all
* the bytes we sent */
if ((rdlbytes == sent) && (rdlbytes != dllen)) {
- if ((dllen-sent) < RDL_CHUNK)
+ if ((dllen-sent) < TRX_RDL_CHUNK)
sendlen = dllen-sent;
else
- sendlen = RDL_CHUNK;
+ sendlen = TRX_RDL_CHUNK;
/* simply avoid having to send a ZLP by ensuring we
* never have an even
dlpos += sendlen;
sent += sendlen;
}
- if (!brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state,
- sizeof(struct rdl_state_le))) {
- brcmf_err("DL_GETSTATE Failed xxxx\n");
- err = -EINVAL;
+ err = brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state,
+ sizeof(state));
+ if (err) {
+ brcmf_err("DL_GETSTATE Failed\n");
goto fail;
}
return -EINVAL;
/* Check we are runnable */
- brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state,
- sizeof(struct rdl_state_le));
+ state.state = 0;
+ brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, sizeof(state));
/* Start the image */
if (state.state == cpu_to_le32(DL_RUNNABLE)) {
- if (!brcmf_usb_dl_cmd(devinfo, DL_GO, &state,
- sizeof(struct rdl_state_le)))
+ if (brcmf_usb_dl_cmd(devinfo, DL_GO, &state, sizeof(state)))
return -ENODEV;
if (brcmf_usb_resetcfg(devinfo))
return -ENODEV;
static bool brcmf_usb_chip_support(int chipid, int chiprev)
{
switch(chipid) {
- case 43143:
+ case BRCM_CC_43143_CHIP_ID:
return true;
- case 43235:
- case 43236:
- case 43238:
+ case BRCM_CC_43235_CHIP_ID:
+ case BRCM_CC_43236_CHIP_ID:
+ case BRCM_CC_43238_CHIP_ID:
return (chiprev == 3);
- case 43242:
+ case BRCM_CC_43242_CHIP_ID:
+ return true;
+ case BRCM_CC_43566_CHIP_ID:
+ case BRCM_CC_43569_CHIP_ID:
return true;
default:
break;
kfree(devinfo->rx_reqs);
}
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-#define TRX_VERSION 1 /* Version 1 */
-#define TRX_MAX_LEN 0x3B0000 /* Max length */
-#define TRX_NO_HEADER 1 /* Do not write TRX header */
-#define TRX_MAX_OFFSET 3 /* Max number of individual files */
-#define TRX_UNCOMP_IMAGE 0x20 /* Trx contains uncompressed image */
-
-struct trx_header_le {
- __le32 magic; /* "HDR0" */
- __le32 len; /* Length of file including header */
- __le32 crc32; /* CRC from flag_version to end of file */
- __le32 flag_version; /* 0:15 flags, 16:31 version */
- __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of
- * header */
-};
static int check_file(const u8 *headers)
{
static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo)
{
switch (devinfo->bus_pub.devid) {
- case 43143:
+ case BRCM_CC_43143_CHIP_ID:
return BRCMF_USB_43143_FW_NAME;
- case 43235:
- case 43236:
- case 43238:
+ case BRCM_CC_43235_CHIP_ID:
+ case BRCM_CC_43236_CHIP_ID:
+ case BRCM_CC_43238_CHIP_ID:
return BRCMF_USB_43236_FW_NAME;
- case 43242:
+ case BRCM_CC_43242_CHIP_ID:
return BRCMF_USB_43242_FW_NAME;
+ case BRCM_CC_43566_CHIP_ID:
+ case BRCM_CC_43569_CHIP_ID:
+ return BRCMF_USB_43569_FW_NAME;
default:
return NULL;
}
return NULL;
}
+static void brcmf_usb_wowl_config(struct device *dev, bool enabled)
+{
+ struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
+
+ brcmf_dbg(USB, "Configuring WOWL, enabled=%d\n", enabled);
+ devinfo->wowl_enabled = enabled;
+ if (enabled)
+ device_set_wakeup_enable(devinfo->dev, true);
+ else
+ device_set_wakeup_enable(devinfo->dev, false);
+}
+
static struct brcmf_bus_ops brcmf_usb_bus_ops = {
.txdata = brcmf_usb_tx,
.stop = brcmf_usb_down,
.txctl = brcmf_usb_tx_ctlpkt,
.rxctl = brcmf_usb_rx_ctlpkt,
+ .wowl_config = brcmf_usb_wowl_config,
};
static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
bus->ops = &brcmf_usb_bus_ops;
bus->proto_type = BRCMF_PROTO_BCDC;
bus->always_use_fws_queue = true;
+#ifdef CONFIG_PM
+ bus->wowl_supported = true;
+#endif
if (!brcmf_usb_dlneeded(devinfo)) {
ret = brcmf_usb_bus_setup(devinfo);
static int
brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
- int ep;
- struct usb_endpoint_descriptor *endpoint;
- int ret = 0;
struct usb_device *usb = interface_to_usbdev(intf);
- int num_of_eps;
- u8 endpoint_num;
struct brcmf_usbdev_info *devinfo;
+ struct usb_interface_descriptor *desc;
+ struct usb_endpoint_descriptor *endpoint;
+ int ret = 0;
+ u32 num_of_eps;
+ u8 endpoint_num, ep;
- brcmf_dbg(USB, "Enter\n");
+ brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct);
devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC);
if (devinfo == NULL)
devinfo->usbdev = usb;
devinfo->dev = &usb->dev;
-
usb_set_intfdata(intf, devinfo);
/* Check that the device supports only one configuration */
if (usb->descriptor.bNumConfigurations != 1) {
- ret = -1;
+ brcmf_err("Number of configurations: %d not supported\n",
+ usb->descriptor.bNumConfigurations);
+ ret = -ENODEV;
goto fail;
}
- if (usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
- ret = -1;
+ if ((usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) &&
+ (usb->descriptor.bDeviceClass != USB_CLASS_MISC) &&
+ (usb->descriptor.bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER)) {
+ brcmf_err("Device class: 0x%x not supported\n",
+ usb->descriptor.bDeviceClass);
+ ret = -ENODEV;
goto fail;
}
- /*
- * Only the BDC interface configuration is supported:
- * Device class: USB_CLASS_VENDOR_SPEC
- * if0 class: USB_CLASS_VENDOR_SPEC
- * if0/ep0: control
- * if0/ep1: bulk in
- * if0/ep2: bulk out (ok if swapped with bulk in)
- */
- if (CONFIGDESC(usb)->bNumInterfaces != 1) {
- ret = -1;
+ desc = &intf->altsetting[0].desc;
+ if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
+ (desc->bInterfaceSubClass != 2) ||
+ (desc->bInterfaceProtocol != 0xff)) {
+ brcmf_err("non WLAN interface %d: 0x%x:0x%x:0x%x\n",
+ desc->bInterfaceNumber, desc->bInterfaceClass,
+ desc->bInterfaceSubClass, desc->bInterfaceProtocol);
+ ret = -ENODEV;
goto fail;
}
- /* Check interface */
- if (IFDESC(usb, CONTROL_IF).bInterfaceClass != USB_CLASS_VENDOR_SPEC ||
- IFDESC(usb, CONTROL_IF).bInterfaceSubClass != 2 ||
- IFDESC(usb, CONTROL_IF).bInterfaceProtocol != 0xff) {
- brcmf_err("invalid control interface: class %d, subclass %d, proto %d\n",
- IFDESC(usb, CONTROL_IF).bInterfaceClass,
- IFDESC(usb, CONTROL_IF).bInterfaceSubClass,
- IFDESC(usb, CONTROL_IF).bInterfaceProtocol);
- ret = -1;
- goto fail;
- }
-
- /* Check control endpoint */
- endpoint = &IFEPDESC(usb, CONTROL_IF, 0);
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT) {
- brcmf_err("invalid control endpoint %d\n",
- endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
- ret = -1;
- goto fail;
- }
-
- devinfo->rx_pipe = 0;
- devinfo->rx_pipe2 = 0;
- devinfo->tx_pipe = 0;
- num_of_eps = IFDESC(usb, BULK_IF).bNumEndpoints - 1;
-
- /* Check data endpoints and get pipes */
- for (ep = 1; ep <= num_of_eps; ep++) {
- endpoint = &IFEPDESC(usb, BULK_IF, ep);
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
- USB_ENDPOINT_XFER_BULK) {
- brcmf_err("invalid data endpoint %d\n", ep);
- ret = -1;
- goto fail;
- }
-
- endpoint_num = endpoint->bEndpointAddress &
- USB_ENDPOINT_NUMBER_MASK;
- if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_IN) {
- if (!devinfo->rx_pipe) {
+ num_of_eps = desc->bNumEndpoints;
+ for (ep = 0; ep < num_of_eps; ep++) {
+ endpoint = &intf->altsetting[0].endpoint[ep].desc;
+ endpoint_num = usb_endpoint_num(endpoint);
+ if (!usb_endpoint_xfer_bulk(endpoint))
+ continue;
+ if (usb_endpoint_dir_in(endpoint)) {
+ if (!devinfo->rx_pipe)
devinfo->rx_pipe =
usb_rcvbulkpipe(usb, endpoint_num);
- } else {
- devinfo->rx_pipe2 =
- usb_rcvbulkpipe(usb, endpoint_num);
- }
} else {
- devinfo->tx_pipe = usb_sndbulkpipe(usb, endpoint_num);
+ if (!devinfo->tx_pipe)
+ devinfo->tx_pipe =
+ usb_sndbulkpipe(usb, endpoint_num);
}
}
+ if (devinfo->rx_pipe == 0) {
+ brcmf_err("No RX (in) Bulk EP found\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+ if (devinfo->tx_pipe == 0) {
+ brcmf_err("No TX (out) Bulk EP found\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ devinfo->ifnum = desc->bInterfaceNumber;
if (usb->speed == USB_SPEED_SUPER)
- brcmf_dbg(USB, "Broadcom super speed USB wireless device detected\n");
+ brcmf_dbg(USB, "Broadcom super speed USB WLAN interface detected\n");
else if (usb->speed == USB_SPEED_HIGH)
- brcmf_dbg(USB, "Broadcom high speed USB wireless device detected\n");
+ brcmf_dbg(USB, "Broadcom high speed USB WLAN interface detected\n");
else
- brcmf_dbg(USB, "Broadcom full speed USB wireless device detected\n");
+ brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");
ret = brcmf_usb_probe_cb(devinfo);
if (ret)
return 0;
fail:
- brcmf_err("failed with errno %d\n", ret);
kfree(devinfo);
usb_set_intfdata(intf, NULL);
return ret;
-
}
static void
brcmf_dbg(USB, "Enter\n");
devinfo->bus_pub.state = BRCMFMAC_USB_STATE_SLEEP;
- brcmf_detach(&usb->dev);
+ if (devinfo->wowl_enabled)
+ brcmf_cancel_all_urbs(devinfo);
+ else
+ brcmf_detach(&usb->dev);
return 0;
}
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
brcmf_dbg(USB, "Enter\n");
- return brcmf_usb_bus_setup(devinfo);
+ if (!devinfo->wowl_enabled)
+ return brcmf_usb_bus_setup(devinfo);
+
+ devinfo->bus_pub.state = BRCMFMAC_USB_STATE_UP;
+ brcmf_usb_rx_fill_all(devinfo);
+ return 0;
}
static int brcmf_usb_reset_resume(struct usb_interface *intf)
{
struct usb_device *usb = interface_to_usbdev(intf);
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
+
brcmf_dbg(USB, "Enter\n");
return brcmf_fw_get_firmwares(&usb->dev, 0,
brcmf_usb_probe_phase2);
}
-#define BRCMF_USB_VENDOR_ID_BROADCOM 0x0a5c
-#define BRCMF_USB_DEVICE_ID_43143 0xbd1e
-#define BRCMF_USB_DEVICE_ID_43236 0xbd17
-#define BRCMF_USB_DEVICE_ID_43242 0xbd1f
-#define BRCMF_USB_DEVICE_ID_BCMFW 0x0bdc
+#define BRCMF_USB_DEVICE(dev_id) \
+ { USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) }
static struct usb_device_id brcmf_usb_devid_table[] = {
- { USB_DEVICE(BRCMF_USB_VENDOR_ID_BROADCOM, BRCMF_USB_DEVICE_ID_43143) },
- { USB_DEVICE(BRCMF_USB_VENDOR_ID_BROADCOM, BRCMF_USB_DEVICE_ID_43236) },
- { USB_DEVICE(BRCMF_USB_VENDOR_ID_BROADCOM, BRCMF_USB_DEVICE_ID_43242) },
+ BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),
+ BRCMF_USB_DEVICE(BRCM_USB_43236_DEVICE_ID),
+ BRCMF_USB_DEVICE(BRCM_USB_43242_DEVICE_ID),
+ BRCMF_USB_DEVICE(BRCM_USB_43569_DEVICE_ID),
/* special entry for device with firmware loaded and running */
- { USB_DEVICE(BRCMF_USB_VENDOR_ID_BROADCOM, BRCMF_USB_DEVICE_ID_BCMFW) },
- { }
+ BRCMF_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
+ { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(usb, brcmf_usb_devid_table);
MODULE_FIRMWARE(BRCMF_USB_43143_FW_NAME);
MODULE_FIRMWARE(BRCMF_USB_43236_FW_NAME);
MODULE_FIRMWARE(BRCMF_USB_43242_FW_NAME);
+MODULE_FIRMWARE(BRCMF_USB_43569_FW_NAME);
static struct usb_driver brcmf_usbdrvr = {
.name = KBUILD_MODNAME,
projects / cascardo / linux.git / blobdiff