+++ /dev/null
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#include <linux/slab.h>
-#include <net/mac80211.h>
-
-#include "iwl-trans.h"
-
-#include "dev.h"
-#include "calib.h"
-#include "agn.h"
-
-/*****************************************************************************
- * INIT calibrations framework
- *****************************************************************************/
-
-/* Opaque calibration results */
-struct iwl_calib_result {
- struct list_head list;
- size_t cmd_len;
- struct iwl_calib_hdr hdr;
- /* data follows */
-};
-
-struct statistics_general_data {
- u32 beacon_silence_rssi_a;
- u32 beacon_silence_rssi_b;
- u32 beacon_silence_rssi_c;
- u32 beacon_energy_a;
- u32 beacon_energy_b;
- u32 beacon_energy_c;
-};
-
-int iwl_send_calib_results(struct iwl_priv *priv)
-{
- struct iwl_host_cmd hcmd = {
- .id = REPLY_PHY_CALIBRATION_CMD,
- };
- struct iwl_calib_result *res;
-
- list_for_each_entry(res, &priv->calib_results, list) {
- int ret;
-
- hcmd.len[0] = res->cmd_len;
- hcmd.data[0] = &res->hdr;
- hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
- ret = iwl_dvm_send_cmd(priv, &hcmd);
- if (ret) {
- IWL_ERR(priv, "Error %d on calib cmd %d\n",
- ret, res->hdr.op_code);
- return ret;
- }
- }
-
- return 0;
-}
-
-int iwl_calib_set(struct iwl_priv *priv,
- const struct iwl_calib_hdr *cmd, int len)
-{
- struct iwl_calib_result *res, *tmp;
-
- res = kmalloc(sizeof(*res) + len - sizeof(struct iwl_calib_hdr),
- GFP_ATOMIC);
- if (!res)
- return -ENOMEM;
- memcpy(&res->hdr, cmd, len);
- res->cmd_len = len;
-
- list_for_each_entry(tmp, &priv->calib_results, list) {
- if (tmp->hdr.op_code == res->hdr.op_code) {
- list_replace(&tmp->list, &res->list);
- kfree(tmp);
- return 0;
- }
- }
-
- /* wasn't in list already */
- list_add_tail(&res->list, &priv->calib_results);
-
- return 0;
-}
-
-void iwl_calib_free_results(struct iwl_priv *priv)
-{
- struct iwl_calib_result *res, *tmp;
-
- list_for_each_entry_safe(res, tmp, &priv->calib_results, list) {
- list_del(&res->list);
- kfree(res);
- }
-}
-
-/*****************************************************************************
- * RUNTIME calibrations framework
- *****************************************************************************/
-
-/* "false alarms" are signals that our DSP tries to lock onto,
- * but then determines that they are either noise, or transmissions
- * from a distant wireless network (also "noise", really) that get
- * "stepped on" by stronger transmissions within our own network.
- * This algorithm attempts to set a sensitivity level that is high
- * enough to receive all of our own network traffic, but not so
- * high that our DSP gets too busy trying to lock onto non-network
- * activity/noise. */
-static int iwl_sens_energy_cck(struct iwl_priv *priv,
- u32 norm_fa,
- u32 rx_enable_time,
- struct statistics_general_data *rx_info)
-{
- u32 max_nrg_cck = 0;
- int i = 0;
- u8 max_silence_rssi = 0;
- u32 silence_ref = 0;
- u8 silence_rssi_a = 0;
- u8 silence_rssi_b = 0;
- u8 silence_rssi_c = 0;
- u32 val;
-
- /* "false_alarms" values below are cross-multiplications to assess the
- * numbers of false alarms within the measured period of actual Rx
- * (Rx is off when we're txing), vs the min/max expected false alarms
- * (some should be expected if rx is sensitive enough) in a
- * hypothetical listening period of 200 time units (TU), 204.8 msec:
- *
- * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
- *
- * */
- u32 false_alarms = norm_fa * 200 * 1024;
- u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
- u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
- struct iwl_sensitivity_data *data = NULL;
- const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
-
- data = &(priv->sensitivity_data);
-
- data->nrg_auto_corr_silence_diff = 0;
-
- /* Find max silence rssi among all 3 receivers.
- * This is background noise, which may include transmissions from other
- * networks, measured during silence before our network's beacon */
- silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
- ALL_BAND_FILTER) >> 8);
- silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
- ALL_BAND_FILTER) >> 8);
- silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
- ALL_BAND_FILTER) >> 8);
-
- val = max(silence_rssi_b, silence_rssi_c);
- max_silence_rssi = max(silence_rssi_a, (u8) val);
-
- /* Store silence rssi in 20-beacon history table */
- data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
- data->nrg_silence_idx++;
- if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
- data->nrg_silence_idx = 0;
-
- /* Find max silence rssi across 20 beacon history */
- for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
- val = data->nrg_silence_rssi[i];
- silence_ref = max(silence_ref, val);
- }
- IWL_DEBUG_CALIB(priv, "silence a %u, b %u, c %u, 20-bcn max %u\n",
- silence_rssi_a, silence_rssi_b, silence_rssi_c,
- silence_ref);
-
- /* Find max rx energy (min value!) among all 3 receivers,
- * measured during beacon frame.
- * Save it in 10-beacon history table. */
- i = data->nrg_energy_idx;
- val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
- data->nrg_value[i] = min(rx_info->beacon_energy_a, val);
-
- data->nrg_energy_idx++;
- if (data->nrg_energy_idx >= 10)
- data->nrg_energy_idx = 0;
-
- /* Find min rx energy (max value) across 10 beacon history.
- * This is the minimum signal level that we want to receive well.
- * Add backoff (margin so we don't miss slightly lower energy frames).
- * This establishes an upper bound (min value) for energy threshold. */
- max_nrg_cck = data->nrg_value[0];
- for (i = 1; i < 10; i++)
- max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
- max_nrg_cck += 6;
-
- IWL_DEBUG_CALIB(priv, "rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
- rx_info->beacon_energy_a, rx_info->beacon_energy_b,
- rx_info->beacon_energy_c, max_nrg_cck - 6);
-
- /* Count number of consecutive beacons with fewer-than-desired
- * false alarms. */
- if (false_alarms < min_false_alarms)
- data->num_in_cck_no_fa++;
- else
- data->num_in_cck_no_fa = 0;
- IWL_DEBUG_CALIB(priv, "consecutive bcns with few false alarms = %u\n",
- data->num_in_cck_no_fa);
-
- /* If we got too many false alarms this time, reduce sensitivity */
- if ((false_alarms > max_false_alarms) &&
- (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) {
- IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u\n",
- false_alarms, max_false_alarms);
- IWL_DEBUG_CALIB(priv, "... reducing sensitivity\n");
- data->nrg_curr_state = IWL_FA_TOO_MANY;
- /* Store for "fewer than desired" on later beacon */
- data->nrg_silence_ref = silence_ref;
-
- /* increase energy threshold (reduce nrg value)
- * to decrease sensitivity */
- data->nrg_th_cck = data->nrg_th_cck - NRG_STEP_CCK;
- /* Else if we got fewer than desired, increase sensitivity */
- } else if (false_alarms < min_false_alarms) {
- data->nrg_curr_state = IWL_FA_TOO_FEW;
-
- /* Compare silence level with silence level for most recent
- * healthy number or too many false alarms */
- data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
- (s32)silence_ref;
-
- IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u, silence diff %d\n",
- false_alarms, min_false_alarms,
- data->nrg_auto_corr_silence_diff);
-
- /* Increase value to increase sensitivity, but only if:
- * 1a) previous beacon did *not* have *too many* false alarms
- * 1b) AND there's a significant difference in Rx levels
- * from a previous beacon with too many, or healthy # FAs
- * OR 2) We've seen a lot of beacons (100) with too few
- * false alarms */
- if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
- ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
- (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
-
- IWL_DEBUG_CALIB(priv, "... increasing sensitivity\n");
- /* Increase nrg value to increase sensitivity */
- val = data->nrg_th_cck + NRG_STEP_CCK;
- data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val);
- } else {
- IWL_DEBUG_CALIB(priv, "... but not changing sensitivity\n");
- }
-
- /* Else we got a healthy number of false alarms, keep status quo */
- } else {
- IWL_DEBUG_CALIB(priv, " FA in safe zone\n");
- data->nrg_curr_state = IWL_FA_GOOD_RANGE;
-
- /* Store for use in "fewer than desired" with later beacon */
- data->nrg_silence_ref = silence_ref;
-
- /* If previous beacon had too many false alarms,
- * give it some extra margin by reducing sensitivity again
- * (but don't go below measured energy of desired Rx) */
- if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
- IWL_DEBUG_CALIB(priv, "... increasing margin\n");
- if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN))
- data->nrg_th_cck -= NRG_MARGIN;
- else
- data->nrg_th_cck = max_nrg_cck;
- }
- }
-
- /* Make sure the energy threshold does not go above the measured
- * energy of the desired Rx signals (reduced by backoff margin),
- * or else we might start missing Rx frames.
- * Lower value is higher energy, so we use max()!
- */
- data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
- IWL_DEBUG_CALIB(priv, "new nrg_th_cck %u\n", data->nrg_th_cck);
-
- data->nrg_prev_state = data->nrg_curr_state;
-
- /* Auto-correlation CCK algorithm */
- if (false_alarms > min_false_alarms) {
-
- /* increase auto_corr values to decrease sensitivity
- * so the DSP won't be disturbed by the noise
- */
- if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
- data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
- else {
- val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
- data->auto_corr_cck =
- min((u32)ranges->auto_corr_max_cck, val);
- }
- val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
- data->auto_corr_cck_mrc =
- min((u32)ranges->auto_corr_max_cck_mrc, val);
- } else if ((false_alarms < min_false_alarms) &&
- ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
- (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
-
- /* Decrease auto_corr values to increase sensitivity */
- val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
- data->auto_corr_cck =
- max((u32)ranges->auto_corr_min_cck, val);
- val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
- data->auto_corr_cck_mrc =
- max((u32)ranges->auto_corr_min_cck_mrc, val);
- }
-
- return 0;
-}
-
-
-static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv,
- u32 norm_fa,
- u32 rx_enable_time)
-{
- u32 val;
- u32 false_alarms = norm_fa * 200 * 1024;
- u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
- u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
- struct iwl_sensitivity_data *data = NULL;
- const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
-
- data = &(priv->sensitivity_data);
-
- /* If we got too many false alarms this time, reduce sensitivity */
- if (false_alarms > max_false_alarms) {
-
- IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u)\n",
- false_alarms, max_false_alarms);
-
- val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm =
- min((u32)ranges->auto_corr_max_ofdm, val);
-
- val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc =
- min((u32)ranges->auto_corr_max_ofdm_mrc, val);
-
- val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_x1 =
- min((u32)ranges->auto_corr_max_ofdm_x1, val);
-
- val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc_x1 =
- min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val);
- }
-
- /* Else if we got fewer than desired, increase sensitivity */
- else if (false_alarms < min_false_alarms) {
-
- IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u\n",
- false_alarms, min_false_alarms);
-
- val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm =
- max((u32)ranges->auto_corr_min_ofdm, val);
-
- val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc =
- max((u32)ranges->auto_corr_min_ofdm_mrc, val);
-
- val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_x1 =
- max((u32)ranges->auto_corr_min_ofdm_x1, val);
-
- val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc_x1 =
- max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val);
- } else {
- IWL_DEBUG_CALIB(priv, "min FA %u < norm FA %u < max FA %u OK\n",
- min_false_alarms, false_alarms, max_false_alarms);
- }
- return 0;
-}
-
-static void iwl_prepare_legacy_sensitivity_tbl(struct iwl_priv *priv,
- struct iwl_sensitivity_data *data,
- __le16 *tbl)
-{
- tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm);
- tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
- tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm_x1);
- tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);
-
- tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
- cpu_to_le16((u16)data->auto_corr_cck);
- tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
- cpu_to_le16((u16)data->auto_corr_cck_mrc);
-
- tbl[HD_MIN_ENERGY_CCK_DET_INDEX] =
- cpu_to_le16((u16)data->nrg_th_cck);
- tbl[HD_MIN_ENERGY_OFDM_DET_INDEX] =
- cpu_to_le16((u16)data->nrg_th_ofdm);
-
- tbl[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
- cpu_to_le16(data->barker_corr_th_min);
- tbl[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
- cpu_to_le16(data->barker_corr_th_min_mrc);
- tbl[HD_OFDM_ENERGY_TH_IN_INDEX] =
- cpu_to_le16(data->nrg_th_cca);
-
- IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
- data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
- data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
- data->nrg_th_ofdm);
-
- IWL_DEBUG_CALIB(priv, "cck: ac %u mrc %u thresh %u\n",
- data->auto_corr_cck, data->auto_corr_cck_mrc,
- data->nrg_th_cck);
-}
-
-/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
-static int iwl_sensitivity_write(struct iwl_priv *priv)
-{
- struct iwl_sensitivity_cmd cmd;
- struct iwl_sensitivity_data *data = NULL;
- struct iwl_host_cmd cmd_out = {
- .id = SENSITIVITY_CMD,
- .len = { sizeof(struct iwl_sensitivity_cmd), },
- .flags = CMD_ASYNC,
- .data = { &cmd, },
- };
-
- data = &(priv->sensitivity_data);
-
- memset(&cmd, 0, sizeof(cmd));
-
- iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.table[0]);
-
- /* Update uCode's "work" table, and copy it to DSP */
- cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
-
- /* Don't send command to uCode if nothing has changed */
- if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
- sizeof(u16)*HD_TABLE_SIZE)) {
- IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n");
- return 0;
- }
-
- /* Copy table for comparison next time */
- memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
- sizeof(u16)*HD_TABLE_SIZE);
-
- return iwl_dvm_send_cmd(priv, &cmd_out);
-}
-
-/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
-static int iwl_enhance_sensitivity_write(struct iwl_priv *priv)
-{
- struct iwl_enhance_sensitivity_cmd cmd;
- struct iwl_sensitivity_data *data = NULL;
- struct iwl_host_cmd cmd_out = {
- .id = SENSITIVITY_CMD,
- .len = { sizeof(struct iwl_enhance_sensitivity_cmd), },
- .flags = CMD_ASYNC,
- .data = { &cmd, },
- };
-
- data = &(priv->sensitivity_data);
-
- memset(&cmd, 0, sizeof(cmd));
-
- iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.enhance_table[0]);
-
- if (priv->lib->hd_v2) {
- cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] =
- HD_INA_NON_SQUARE_DET_OFDM_DATA_V2;
- cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] =
- HD_INA_NON_SQUARE_DET_CCK_DATA_V2;
- cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] =
- HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
- HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
- HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] =
- HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] =
- HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
- HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
- HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] =
- HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] =
- HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2;
- } else {
- cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] =
- HD_INA_NON_SQUARE_DET_OFDM_DATA_V1;
- cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] =
- HD_INA_NON_SQUARE_DET_CCK_DATA_V1;
- cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] =
- HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
- HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
- HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] =
- HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1;
- cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] =
- HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
- HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
- HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] =
- HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1;
- cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] =
- HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1;
- }
-
- /* Update uCode's "work" table, and copy it to DSP */
- cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
-
- /* Don't send command to uCode if nothing has changed */
- if (!memcmp(&cmd.enhance_table[0], &(priv->sensitivity_tbl[0]),
- sizeof(u16)*HD_TABLE_SIZE) &&
- !memcmp(&cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX],
- &(priv->enhance_sensitivity_tbl[0]),
- sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES)) {
- IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n");
- return 0;
- }
-
- /* Copy table for comparison next time */
- memcpy(&(priv->sensitivity_tbl[0]), &(cmd.enhance_table[0]),
- sizeof(u16)*HD_TABLE_SIZE);
- memcpy(&(priv->enhance_sensitivity_tbl[0]),
- &(cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX]),
- sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES);
-
- return iwl_dvm_send_cmd(priv, &cmd_out);
-}
-
-void iwl_init_sensitivity(struct iwl_priv *priv)
-{
- int ret = 0;
- int i;
- struct iwl_sensitivity_data *data = NULL;
- const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
-
- if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED)
- return;
-
- IWL_DEBUG_CALIB(priv, "Start iwl_init_sensitivity\n");
-
- /* Clear driver's sensitivity algo data */
- data = &(priv->sensitivity_data);
-
- if (ranges == NULL)
- return;
-
- memset(data, 0, sizeof(struct iwl_sensitivity_data));
-
- data->num_in_cck_no_fa = 0;
- data->nrg_curr_state = IWL_FA_TOO_MANY;
- data->nrg_prev_state = IWL_FA_TOO_MANY;
- data->nrg_silence_ref = 0;
- data->nrg_silence_idx = 0;
- data->nrg_energy_idx = 0;
-
- for (i = 0; i < 10; i++)
- data->nrg_value[i] = 0;
-
- for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
- data->nrg_silence_rssi[i] = 0;
-
- data->auto_corr_ofdm = ranges->auto_corr_min_ofdm;
- data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
- data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1;
- data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
- data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
- data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
- data->nrg_th_cck = ranges->nrg_th_cck;
- data->nrg_th_ofdm = ranges->nrg_th_ofdm;
- data->barker_corr_th_min = ranges->barker_corr_th_min;
- data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc;
- data->nrg_th_cca = ranges->nrg_th_cca;
-
- data->last_bad_plcp_cnt_ofdm = 0;
- data->last_fa_cnt_ofdm = 0;
- data->last_bad_plcp_cnt_cck = 0;
- data->last_fa_cnt_cck = 0;
-
- if (priv->fw->enhance_sensitivity_table)
- ret |= iwl_enhance_sensitivity_write(priv);
- else
- ret |= iwl_sensitivity_write(priv);
- IWL_DEBUG_CALIB(priv, "<<return 0x%X\n", ret);
-}
-
-void iwl_sensitivity_calibration(struct iwl_priv *priv)
-{
- u32 rx_enable_time;
- u32 fa_cck;
- u32 fa_ofdm;
- u32 bad_plcp_cck;
- u32 bad_plcp_ofdm;
- u32 norm_fa_ofdm;
- u32 norm_fa_cck;
- struct iwl_sensitivity_data *data = NULL;
- struct statistics_rx_non_phy *rx_info;
- struct statistics_rx_phy *ofdm, *cck;
- struct statistics_general_data statis;
-
- if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED)
- return;
-
- data = &(priv->sensitivity_data);
-
- if (!iwl_is_any_associated(priv)) {
- IWL_DEBUG_CALIB(priv, "<< - not associated\n");
- return;
- }
-
- spin_lock_bh(&priv->statistics.lock);
- rx_info = &priv->statistics.rx_non_phy;
- ofdm = &priv->statistics.rx_ofdm;
- cck = &priv->statistics.rx_cck;
- if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
- IWL_DEBUG_CALIB(priv, "<< invalid data.\n");
- spin_unlock_bh(&priv->statistics.lock);
- return;
- }
-
- /* Extract Statistics: */
- rx_enable_time = le32_to_cpu(rx_info->channel_load);
- fa_cck = le32_to_cpu(cck->false_alarm_cnt);
- fa_ofdm = le32_to_cpu(ofdm->false_alarm_cnt);
- bad_plcp_cck = le32_to_cpu(cck->plcp_err);
- bad_plcp_ofdm = le32_to_cpu(ofdm->plcp_err);
-
- statis.beacon_silence_rssi_a =
- le32_to_cpu(rx_info->beacon_silence_rssi_a);
- statis.beacon_silence_rssi_b =
- le32_to_cpu(rx_info->beacon_silence_rssi_b);
- statis.beacon_silence_rssi_c =
- le32_to_cpu(rx_info->beacon_silence_rssi_c);
- statis.beacon_energy_a =
- le32_to_cpu(rx_info->beacon_energy_a);
- statis.beacon_energy_b =
- le32_to_cpu(rx_info->beacon_energy_b);
- statis.beacon_energy_c =
- le32_to_cpu(rx_info->beacon_energy_c);
-
- spin_unlock_bh(&priv->statistics.lock);
-
- IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time);
-
- if (!rx_enable_time) {
- IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n");
- return;
- }
-
- /* These statistics increase monotonically, and do not reset
- * at each beacon. Calculate difference from last value, or just
- * use the new statistics value if it has reset or wrapped around. */
- if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
- data->last_bad_plcp_cnt_cck = bad_plcp_cck;
- else {
- bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
- data->last_bad_plcp_cnt_cck += bad_plcp_cck;
- }
-
- if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
- data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
- else {
- bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
- data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
- }
-
- if (data->last_fa_cnt_ofdm > fa_ofdm)
- data->last_fa_cnt_ofdm = fa_ofdm;
- else {
- fa_ofdm -= data->last_fa_cnt_ofdm;
- data->last_fa_cnt_ofdm += fa_ofdm;
- }
-
- if (data->last_fa_cnt_cck > fa_cck)
- data->last_fa_cnt_cck = fa_cck;
- else {
- fa_cck -= data->last_fa_cnt_cck;
- data->last_fa_cnt_cck += fa_cck;
- }
-
- /* Total aborted signal locks */
- norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
- norm_fa_cck = fa_cck + bad_plcp_cck;
-
- IWL_DEBUG_CALIB(priv, "cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck,
- bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
-
- iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
- iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
- if (priv->fw->enhance_sensitivity_table)
- iwl_enhance_sensitivity_write(priv);
- else
- iwl_sensitivity_write(priv);
-}
-
-static inline u8 find_first_chain(u8 mask)
-{
- if (mask & ANT_A)
- return CHAIN_A;
- if (mask & ANT_B)
- return CHAIN_B;
- return CHAIN_C;
-}
-
-/**
- * Run disconnected antenna algorithm to find out which antennas are
- * disconnected.
- */
-static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
- struct iwl_chain_noise_data *data)
-{
- u32 active_chains = 0;
- u32 max_average_sig;
- u16 max_average_sig_antenna_i;
- u8 num_tx_chains;
- u8 first_chain;
- u16 i = 0;
-
- average_sig[0] = data->chain_signal_a / IWL_CAL_NUM_BEACONS;
- average_sig[1] = data->chain_signal_b / IWL_CAL_NUM_BEACONS;
- average_sig[2] = data->chain_signal_c / IWL_CAL_NUM_BEACONS;
-
- if (average_sig[0] >= average_sig[1]) {
- max_average_sig = average_sig[0];
- max_average_sig_antenna_i = 0;
- active_chains = (1 << max_average_sig_antenna_i);
- } else {
- max_average_sig = average_sig[1];
- max_average_sig_antenna_i = 1;
- active_chains = (1 << max_average_sig_antenna_i);
- }
-
- if (average_sig[2] >= max_average_sig) {
- max_average_sig = average_sig[2];
- max_average_sig_antenna_i = 2;
- active_chains = (1 << max_average_sig_antenna_i);
- }
-
- IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n",
- average_sig[0], average_sig[1], average_sig[2]);
- IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n",
- max_average_sig, max_average_sig_antenna_i);
-
- /* Compare signal strengths for all 3 receivers. */
- for (i = 0; i < NUM_RX_CHAINS; i++) {
- if (i != max_average_sig_antenna_i) {
- s32 rssi_delta = (max_average_sig - average_sig[i]);
-
- /* If signal is very weak, compared with
- * strongest, mark it as disconnected. */
- if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
- data->disconn_array[i] = 1;
- else
- active_chains |= (1 << i);
- IWL_DEBUG_CALIB(priv, "i = %d rssiDelta = %d "
- "disconn_array[i] = %d\n",
- i, rssi_delta, data->disconn_array[i]);
- }
- }
-
- /*
- * The above algorithm sometimes fails when the ucode
- * reports 0 for all chains. It's not clear why that
- * happens to start with, but it is then causing trouble
- * because this can make us enable more chains than the
- * hardware really has.
- *
- * To be safe, simply mask out any chains that we know
- * are not on the device.
- */
- active_chains &= priv->nvm_data->valid_rx_ant;
-
- num_tx_chains = 0;
- for (i = 0; i < NUM_RX_CHAINS; i++) {
- /* loops on all the bits of
- * priv->hw_setting.valid_tx_ant */
- u8 ant_msk = (1 << i);
- if (!(priv->nvm_data->valid_tx_ant & ant_msk))
- continue;
-
- num_tx_chains++;
- if (data->disconn_array[i] == 0)
- /* there is a Tx antenna connected */
- break;
- if (num_tx_chains == priv->hw_params.tx_chains_num &&
- data->disconn_array[i]) {
- /*
- * If all chains are disconnected
- * connect the first valid tx chain
- */
- first_chain =
- find_first_chain(priv->nvm_data->valid_tx_ant);
- data->disconn_array[first_chain] = 0;
- active_chains |= BIT(first_chain);
- IWL_DEBUG_CALIB(priv,
- "All Tx chains are disconnected W/A - declare %d as connected\n",
- first_chain);
- break;
- }
- }
-
- if (active_chains != priv->nvm_data->valid_rx_ant &&
- active_chains != priv->chain_noise_data.active_chains)
- IWL_DEBUG_CALIB(priv,
- "Detected that not all antennas are connected! "
- "Connected: %#x, valid: %#x.\n",
- active_chains,
- priv->nvm_data->valid_rx_ant);
-
- /* Save for use within RXON, TX, SCAN commands, etc. */
- data->active_chains = active_chains;
- IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n",
- active_chains);
-}
-
-static void iwlagn_gain_computation(struct iwl_priv *priv,
- u32 average_noise[NUM_RX_CHAINS],
- u8 default_chain)
-{
- int i;
- s32 delta_g;
- struct iwl_chain_noise_data *data = &priv->chain_noise_data;
-
- /*
- * Find Gain Code for the chains based on "default chain"
- */
- for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) {
- if ((data->disconn_array[i])) {
- data->delta_gain_code[i] = 0;
- continue;
- }
-
- delta_g = (priv->lib->chain_noise_scale *
- ((s32)average_noise[default_chain] -
- (s32)average_noise[i])) / 1500;
-
- /* bound gain by 2 bits value max, 3rd bit is sign */
- data->delta_gain_code[i] =
- min(abs(delta_g),
- (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
-
- if (delta_g < 0)
- /*
- * set negative sign ...
- * note to Intel developers: This is uCode API format,
- * not the format of any internal device registers.
- * Do not change this format for e.g. 6050 or similar
- * devices. Change format only if more resolution
- * (i.e. more than 2 bits magnitude) is needed.
- */
- data->delta_gain_code[i] |= (1 << 2);
- }
-
- IWL_DEBUG_CALIB(priv, "Delta gains: ANT_B = %d ANT_C = %d\n",
- data->delta_gain_code[1], data->delta_gain_code[2]);
-
- if (!data->radio_write) {
- struct iwl_calib_chain_noise_gain_cmd cmd;
-
- memset(&cmd, 0, sizeof(cmd));
-
- iwl_set_calib_hdr(&cmd.hdr,
- priv->phy_calib_chain_noise_gain_cmd);
- cmd.delta_gain_1 = data->delta_gain_code[1];
- cmd.delta_gain_2 = data->delta_gain_code[2];
- iwl_dvm_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
- CMD_ASYNC, sizeof(cmd), &cmd);
-
- data->radio_write = 1;
- data->state = IWL_CHAIN_NOISE_CALIBRATED;
- }
-}
-
-/*
- * Accumulate 16 beacons of signal and noise statistics for each of
- * 3 receivers/antennas/rx-chains, then figure out:
- * 1) Which antennas are connected.
- * 2) Differential rx gain settings to balance the 3 receivers.
- */
-void iwl_chain_noise_calibration(struct iwl_priv *priv)
-{
- struct iwl_chain_noise_data *data = NULL;
-
- u32 chain_noise_a;
- u32 chain_noise_b;
- u32 chain_noise_c;
- u32 chain_sig_a;
- u32 chain_sig_b;
- u32 chain_sig_c;
- u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
- u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
- u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
- u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
- u16 i = 0;
- u16 rxon_chnum = INITIALIZATION_VALUE;
- u16 stat_chnum = INITIALIZATION_VALUE;
- u8 rxon_band24;
- u8 stat_band24;
- struct statistics_rx_non_phy *rx_info;
-
- /*
- * MULTI-FIXME:
- * When we support multiple interfaces on different channels,
- * this must be modified/fixed.
- */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED)
- return;
-
- data = &(priv->chain_noise_data);
-
- /*
- * Accumulate just the first "chain_noise_num_beacons" after
- * the first association, then we're done forever.
- */
- if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
- if (data->state == IWL_CHAIN_NOISE_ALIVE)
- IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n");
- return;
- }
-
- spin_lock_bh(&priv->statistics.lock);
-
- rx_info = &priv->statistics.rx_non_phy;
-
- if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
- IWL_DEBUG_CALIB(priv, " << Interference data unavailable\n");
- spin_unlock_bh(&priv->statistics.lock);
- return;
- }
-
- rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK);
- rxon_chnum = le16_to_cpu(ctx->staging.channel);
- stat_band24 =
- !!(priv->statistics.flag & STATISTICS_REPLY_FLG_BAND_24G_MSK);
- stat_chnum = le32_to_cpu(priv->statistics.flag) >> 16;
-
- /* Make sure we accumulate data for just the associated channel
- * (even if scanning). */
- if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) {
- IWL_DEBUG_CALIB(priv, "Stats not from chan=%d, band24=%d\n",
- rxon_chnum, rxon_band24);
- spin_unlock_bh(&priv->statistics.lock);
- return;
- }
-
- /*
- * Accumulate beacon statistics values across
- * "chain_noise_num_beacons"
- */
- chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
- IN_BAND_FILTER;
- chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
- IN_BAND_FILTER;
- chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
- IN_BAND_FILTER;
-
- chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
- chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
- chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;
-
- spin_unlock_bh(&priv->statistics.lock);
-
- data->beacon_count++;
-
- data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
- data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
- data->chain_noise_c = (chain_noise_c + data->chain_noise_c);
-
- data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
- data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
- data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
-
- IWL_DEBUG_CALIB(priv, "chan=%d, band24=%d, beacon=%d\n",
- rxon_chnum, rxon_band24, data->beacon_count);
- IWL_DEBUG_CALIB(priv, "chain_sig: a %d b %d c %d\n",
- chain_sig_a, chain_sig_b, chain_sig_c);
- IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n",
- chain_noise_a, chain_noise_b, chain_noise_c);
-
- /* If this is the "chain_noise_num_beacons", determine:
- * 1) Disconnected antennas (using signal strengths)
- * 2) Differential gain (using silence noise) to balance receivers */
- if (data->beacon_count != IWL_CAL_NUM_BEACONS)
- return;
-
- /* Analyze signal for disconnected antenna */
- if (priv->lib->bt_params &&
- priv->lib->bt_params->advanced_bt_coexist) {
- /* Disable disconnected antenna algorithm for advanced
- bt coex, assuming valid antennas are connected */
- data->active_chains = priv->nvm_data->valid_rx_ant;
- for (i = 0; i < NUM_RX_CHAINS; i++)
- if (!(data->active_chains & (1<<i)))
- data->disconn_array[i] = 1;
- } else
- iwl_find_disconn_antenna(priv, average_sig, data);
-
- /* Analyze noise for rx balance */
- average_noise[0] = data->chain_noise_a / IWL_CAL_NUM_BEACONS;
- average_noise[1] = data->chain_noise_b / IWL_CAL_NUM_BEACONS;
- average_noise[2] = data->chain_noise_c / IWL_CAL_NUM_BEACONS;
-
- for (i = 0; i < NUM_RX_CHAINS; i++) {
- if (!(data->disconn_array[i]) &&
- (average_noise[i] <= min_average_noise)) {
- /* This means that chain i is active and has
- * lower noise values so far: */
- min_average_noise = average_noise[i];
- min_average_noise_antenna_i = i;
- }
- }
-
- IWL_DEBUG_CALIB(priv, "average_noise: a %d b %d c %d\n",
- average_noise[0], average_noise[1],
- average_noise[2]);
-
- IWL_DEBUG_CALIB(priv, "min_average_noise = %d, antenna %d\n",
- min_average_noise, min_average_noise_antenna_i);
-
- iwlagn_gain_computation(
- priv, average_noise,
- find_first_chain(priv->nvm_data->valid_rx_ant));
-
- /* Some power changes may have been made during the calibration.
- * Update and commit the RXON
- */
- iwl_update_chain_flags(priv);
-
- data->state = IWL_CHAIN_NOISE_DONE;
- iwl_power_update_mode(priv, false);
-}
-
-void iwl_reset_run_time_calib(struct iwl_priv *priv)
-{
- int i;
- memset(&(priv->sensitivity_data), 0,
- sizeof(struct iwl_sensitivity_data));
- memset(&(priv->chain_noise_data), 0,
- sizeof(struct iwl_chain_noise_data));
- for (i = 0; i < NUM_RX_CHAINS; i++)
- priv->chain_noise_data.delta_gain_code[i] =
- CHAIN_NOISE_DELTA_GAIN_INIT_VAL;
-
- /* Ask for statistics now, the uCode will send notification
- * periodically after association */
- iwl_send_statistics_request(priv, CMD_ASYNC, true);
-}
projects / cascardo / linux.git / blobdiff