+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <net/mac80211.h>
-#include "iwl-io.h"
-#include "iwl-debug.h"
-#include "iwl-trans.h"
-#include "iwl-modparams.h"
-#include "dev.h"
-#include "agn.h"
-#include "commands.h"
-#include "power.h"
-
-static bool force_cam = true;
-module_param(force_cam, bool, 0644);
-MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)");
-
-/*
- * Setting power level allows the card to go to sleep when not busy.
- *
- * We calculate a sleep command based on the required latency, which
- * we get from mac80211. In order to handle thermal throttling, we can
- * also use pre-defined power levels.
- */
-
-/*
- * This defines the old power levels. They are still used by default
- * (level 1) and for thermal throttle (levels 3 through 5)
- */
-
-struct iwl_power_vec_entry {
- struct iwl_powertable_cmd cmd;
- u8 no_dtim; /* number of skip dtim */
-};
-
-#define IWL_DTIM_RANGE_0_MAX 2
-#define IWL_DTIM_RANGE_1_MAX 10
-
-#define NOSLP cpu_to_le16(0), 0, 0
-#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
-#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \
- IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
- IWL_POWER_ADVANCE_PM_ENA_MSK)
-#define ASLP_TOUT(T) cpu_to_le32(T)
-#define TU_TO_USEC 1024
-#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
-#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
- cpu_to_le32(X1), \
- cpu_to_le32(X2), \
- cpu_to_le32(X3), \
- cpu_to_le32(X4)}
-/* default power management (not Tx power) table values */
-/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
-/* DTIM 0 - 2 */
-static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
- {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
- {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
- {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
- {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
- {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
-};
-
-
-/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
-/* DTIM 3 - 10 */
-static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
- {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
- {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
- {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
- {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
- {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
-};
-
-/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
-/* DTIM 11 - */
-static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
- {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
- {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
- {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
- {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
- {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
-};
-
-/* advance power management */
-/* DTIM 0 - 2 */
-static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
-};
-
-
-/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
-/* DTIM 3 - 10 */
-static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
-};
-
-/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
-/* DTIM 11 - */
-static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
- {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
- SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
-};
-
-static void iwl_static_sleep_cmd(struct iwl_priv *priv,
- struct iwl_powertable_cmd *cmd,
- enum iwl_power_level lvl, int period)
-{
- const struct iwl_power_vec_entry *table;
- int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
- int i;
- u8 skip;
- u32 slp_itrvl;
-
- if (priv->lib->adv_pm) {
- table = apm_range_2;
- if (period <= IWL_DTIM_RANGE_1_MAX)
- table = apm_range_1;
- if (period <= IWL_DTIM_RANGE_0_MAX)
- table = apm_range_0;
- } else {
- table = range_2;
- if (period <= IWL_DTIM_RANGE_1_MAX)
- table = range_1;
- if (period <= IWL_DTIM_RANGE_0_MAX)
- table = range_0;
- }
-
- if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
- memset(cmd, 0, sizeof(*cmd));
- else
- *cmd = table[lvl].cmd;
-
- if (period == 0) {
- skip = 0;
- period = 1;
- for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
- max_sleep[i] = 1;
-
- } else {
- skip = table[lvl].no_dtim;
- for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
- max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
- max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
- }
-
- slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
- /* figure out the listen interval based on dtim period and skip */
- if (slp_itrvl == 0xFF)
- cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
- cpu_to_le32(period * (skip + 1));
-
- slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
- if (slp_itrvl > period)
- cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
- cpu_to_le32((slp_itrvl / period) * period);
-
- if (skip)
- cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
- else
- cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
-
- if (priv->cfg->base_params->shadow_reg_enable)
- cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
- else
- cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
-
- if (iwl_advanced_bt_coexist(priv)) {
- if (!priv->lib->bt_params->bt_sco_disable)
- cmd->flags |= IWL_POWER_BT_SCO_ENA;
- else
- cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
- }
-
-
- slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
- if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
- cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
- cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
-
- /* enforce max sleep interval */
- for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
- if (le32_to_cpu(cmd->sleep_interval[i]) >
- (max_sleep[i] * period))
- cmd->sleep_interval[i] =
- cpu_to_le32(max_sleep[i] * period);
- if (i != (IWL_POWER_VEC_SIZE - 1)) {
- if (le32_to_cpu(cmd->sleep_interval[i]) >
- le32_to_cpu(cmd->sleep_interval[i+1]))
- cmd->sleep_interval[i] =
- cmd->sleep_interval[i+1];
- }
- }
-
- if (priv->power_data.bus_pm)
- cmd->flags |= IWL_POWER_PCI_PM_MSK;
- else
- cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
-
- IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
- skip, period);
- /* The power level here is 0-4 (used as array index), but user expects
- to see 1-5 (according to spec). */
- IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
-}
-
-static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
- struct iwl_powertable_cmd *cmd)
-{
- memset(cmd, 0, sizeof(*cmd));
-
- if (priv->power_data.bus_pm)
- cmd->flags |= IWL_POWER_PCI_PM_MSK;
-
- IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
-}
-
-static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
-{
- IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
- IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
- IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
- IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
- IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
- le32_to_cpu(cmd->sleep_interval[0]),
- le32_to_cpu(cmd->sleep_interval[1]),
- le32_to_cpu(cmd->sleep_interval[2]),
- le32_to_cpu(cmd->sleep_interval[3]),
- le32_to_cpu(cmd->sleep_interval[4]));
-
- return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, 0,
- sizeof(struct iwl_powertable_cmd), cmd);
-}
-
-static void iwl_power_build_cmd(struct iwl_priv *priv,
- struct iwl_powertable_cmd *cmd)
-{
- bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
- int dtimper;
-
- if (force_cam) {
- iwl_power_sleep_cam_cmd(priv, cmd);
- return;
- }
-
- dtimper = priv->hw->conf.ps_dtim_period ?: 1;
-
- if (priv->wowlan)
- iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
- else if (!priv->lib->no_idle_support &&
- priv->hw->conf.flags & IEEE80211_CONF_IDLE)
- iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
- else if (iwl_tt_is_low_power_state(priv)) {
- /* in thermal throttling low power state */
- iwl_static_sleep_cmd(priv, cmd,
- iwl_tt_current_power_mode(priv), dtimper);
- } else if (!enabled)
- iwl_power_sleep_cam_cmd(priv, cmd);
- else if (priv->power_data.debug_sleep_level_override >= 0)
- iwl_static_sleep_cmd(priv, cmd,
- priv->power_data.debug_sleep_level_override,
- dtimper);
- else {
- /* Note that the user parameter is 1-5 (according to spec),
- but we pass 0-4 because it acts as an array index. */
- if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 &&
- iwlwifi_mod_params.power_level <= IWL_POWER_NUM)
- iwl_static_sleep_cmd(priv, cmd,
- iwlwifi_mod_params.power_level - 1, dtimper);
- else
- iwl_static_sleep_cmd(priv, cmd,
- IWL_POWER_INDEX_1, dtimper);
- }
-}
-
-int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
- bool force)
-{
- int ret;
- bool update_chains;
-
- lockdep_assert_held(&priv->mutex);
-
- /* Don't update the RX chain when chain noise calibration is running */
- update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
- priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
-
- if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
- return 0;
-
- if (!iwl_is_ready_rf(priv))
- return -EIO;
-
- /* scan complete use sleep_power_next, need to be updated */
- memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
- if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
- IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
- return 0;
- }
-
- if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
- iwl_dvm_set_pmi(priv, true);
-
- ret = iwl_set_power(priv, cmd);
- if (!ret) {
- if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
- iwl_dvm_set_pmi(priv, false);
-
- if (update_chains)
- iwl_update_chain_flags(priv);
- else
- IWL_DEBUG_POWER(priv,
- "Cannot update the power, chain noise "
- "calibration running: %d\n",
- priv->chain_noise_data.state);
-
- memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
- } else
- IWL_ERR(priv, "set power fail, ret = %d\n", ret);
-
- return ret;
-}
-
-int iwl_power_update_mode(struct iwl_priv *priv, bool force)
-{
- struct iwl_powertable_cmd cmd;
-
- iwl_power_build_cmd(priv, &cmd);
- return iwl_power_set_mode(priv, &cmd, force);
-}
-
-/* initialize to default */
-void iwl_power_initialize(struct iwl_priv *priv)
-{
- priv->power_data.bus_pm = priv->trans->pm_support;
-
- priv->power_data.debug_sleep_level_override = -1;
-
- memset(&priv->power_data.sleep_cmd, 0,
- sizeof(priv->power_data.sleep_cmd));
-}
projects / cascardo / linux.git / blobdiff