#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 5
#define IWL6000G2_UCODE_API_MAX 5
-#define IWL130_UCODE_API_MAX 5
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
#define IWL6000G2_UCODE_API_MIN 4
-#define IWL130_UCODE_API_MIN 5
#define IWL6000_FW_PRE "iwlwifi-6000-"
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
#define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
-#define IWL130_FW_PRE "iwlwifi-130-"
-#define _IWL130_MODULE_FIRMWARE(api) IWL130_FW_PRE #api ".ucode"
-#define IWL130_MODULE_FIRMWARE(api) _IWL130_MODULE_FIRMWARE(api)
-
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
- .post_associate = iwl_post_associate,
- .isr = iwl_isr_ict,
- .config_ap = iwl_config_ap,
+ .isr_ops = {
+ .isr = iwl_isr_ict,
+ .free = iwl_free_isr_ict,
+ .alloc = iwl_alloc_isr_ict,
+ .reset = iwl_reset_ict,
+ .disable = iwl_disable_ict,
+ },
.temp_ops = {
.temperature = iwlagn_temperature,
},
- .manage_ibss_station = iwlagn_manage_ibss_station,
- .update_bcast_stations = iwl_update_bcast_stations,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.bt_stats_read = iwl_ucode_bt_stats_read,
.reply_tx_error = iwl_reply_tx_error_read,
},
- .recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
- .post_associate = iwl_post_associate,
- .isr = iwl_isr_ict,
- .config_ap = iwl_config_ap,
+ .isr_ops = {
+ .isr = iwl_isr_ict,
+ .free = iwl_free_isr_ict,
+ .alloc = iwl_alloc_isr_ict,
+ .reset = iwl_reset_ict,
+ .disable = iwl_disable_ict,
+ },
.temp_ops = {
.temperature = iwlagn_temperature,
},
- .manage_ibss_station = iwlagn_manage_ibss_station,
- .update_bcast_stations = iwl_update_bcast_stations,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.bt_stats_read = iwl_ucode_bt_stats_read,
.reply_tx_error = iwl_reply_tx_error_read,
},
- .recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl6050_ops = {
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
.nic = &iwl6050_nic_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl6050g2_ops = {
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
.nic = &iwl6050g2_nic_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl6000g2b_ops = {
.hcmd = &iwlagn_bt_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
};
static struct iwl_base_params iwl6000_base_params = {
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+ .wd_timeout = IWL_DEF_WD_TIMEOUT,
.max_event_log_size = 512,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
};
static struct iwl_base_params iwl6050_base_params = {
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
- .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+ .wd_timeout = IWL_DEF_WD_TIMEOUT,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
};
static struct iwl_base_params iwl6000_coex_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+ .wd_timeout = IWL_LONG_WD_TIMEOUT,
.max_event_log_size = 512,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
};
static struct iwl_ht_params iwl6000_ht_params = {
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.advanced_bt_coexist = true,
+ .agg_time_limit = BT_AGG_THRESHOLD_DEF,
.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+ .bt_sco_disable = true,
};
-struct iwl_cfg iwl6000g2a_2agn_cfg = {
- .name = "6000 Series 2x2 AGN Gen2a",
+struct iwl_cfg iwl6005_2agn_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2a_2abg_cfg = {
- .name = "6000 Series 2x2 ABG Gen2a",
+struct iwl_cfg iwl6005_2abg_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2a_2bg_cfg = {
- .name = "6000 Series 2x2 BG Gen2a",
+struct iwl_cfg iwl6005_2bg_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2b_2agn_cfg = {
- .name = "6000 Series 2x2 AGN Gen2b",
+struct iwl_cfg iwl6030_2agn_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2b_2abg_cfg = {
- .name = "6000 Series 2x2 ABG Gen2b",
+struct iwl_cfg iwl6030_2abg_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2b_2bgn_cfg = {
- .name = "6000 Series 2x2 BGN Gen2b",
+struct iwl_cfg iwl6030_2bgn_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2b_2bg_cfg = {
- .name = "6000 Series 2x2 BG Gen2b",
+struct iwl_cfg iwl6030_2bg_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2b_bgn_cfg = {
- .name = "6000 Series 1x2 BGN Gen2b",
+struct iwl_cfg iwl1030_bgn_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_A,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
-struct iwl_cfg iwl6000g2b_bg_cfg = {
- .name = "6000 Series 1x2 BG Gen2b",
+struct iwl_cfg iwl1030_bg_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .valid_tx_ant = ANT_A,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_BC, /* .cfg overwrite */
+ .valid_rx_ant = ANT_BC, /* .cfg overwrite */
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.pa_type = IWL_PA_INTERNAL,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_BC, /* .cfg overwrite */
+ .valid_rx_ant = ANT_BC, /* .cfg overwrite */
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_BC, /* .cfg overwrite */
+ .valid_rx_ant = ANT_BC, /* .cfg overwrite */
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6050_2agn_cfg = {
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.ops = &iwl6050_ops,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
-struct iwl_cfg iwl6050g2_bgn_cfg = {
- .name = "6050 Series 1x2 BGN Gen2",
+struct iwl_cfg iwl6150_bgn_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
- .sku = IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_A,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
.ops = &iwl6050g2_ops,
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
.use_new_eeprom_reading = true,
};
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.ops = &iwl6050_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_ABC,
- .valid_rx_ant = ANT_ABC,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl130_bgn_cfg = {
- .name = "Intel(R) 130 Series 1x1 BGN",
+ .name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL130_UCODE_API_MAX,
- .ucode_api_min = IWL130_UCODE_API_MIN,
- .sku = IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_A,
- .valid_rx_ant = ANT_A,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.bt_params = &iwl6000_bt_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl130_bg_cfg = {
- .name = "Intel(R) 130 Series 1x2 BG",
+ .name = "Intel(R) Centrino(R) Wireless-N 130 BG",
.fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL130_UCODE_API_MAX,
- .ucode_api_min = IWL130_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .valid_tx_ant = ANT_A,
- .valid_rx_ant = ANT_A,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.base_params = &iwl6000_coex_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
+ .adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
-MODULE_FIRMWARE(IWL130_MODULE_FIRMWARE(IWL130_UCODE_API_MAX));
projects / cascardo / linux.git / blobdiff