+++ /dev/null
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __IWL_CONFIG_H__
-#define __IWL_CONFIG_H__
-
-#include <linux/types.h>
-#include <net/mac80211.h>
-
-
-enum iwl_device_family {
- IWL_DEVICE_FAMILY_UNDEFINED,
- IWL_DEVICE_FAMILY_1000,
- IWL_DEVICE_FAMILY_100,
- IWL_DEVICE_FAMILY_2000,
- IWL_DEVICE_FAMILY_2030,
- IWL_DEVICE_FAMILY_105,
- IWL_DEVICE_FAMILY_135,
- IWL_DEVICE_FAMILY_5000,
- IWL_DEVICE_FAMILY_5150,
- IWL_DEVICE_FAMILY_6000,
- IWL_DEVICE_FAMILY_6000i,
- IWL_DEVICE_FAMILY_6005,
- IWL_DEVICE_FAMILY_6030,
- IWL_DEVICE_FAMILY_6050,
- IWL_DEVICE_FAMILY_6150,
- IWL_DEVICE_FAMILY_7000,
- IWL_DEVICE_FAMILY_8000,
-};
-
-static inline bool iwl_has_secure_boot(u32 hw_rev,
- enum iwl_device_family family)
-{
- /* return 1 only for family 8000 B0 */
- if ((family == IWL_DEVICE_FAMILY_8000) && (hw_rev & 0xC))
- return true;
-
- return false;
-}
-
-/*
- * LED mode
- * IWL_LED_DEFAULT: use device default
- * IWL_LED_RF_STATE: turn LED on/off based on RF state
- * LED ON = RF ON
- * LED OFF = RF OFF
- * IWL_LED_BLINK: adjust led blink rate based on blink table
- * IWL_LED_DISABLE: led disabled
- */
-enum iwl_led_mode {
- IWL_LED_DEFAULT,
- IWL_LED_RF_STATE,
- IWL_LED_BLINK,
- IWL_LED_DISABLE,
-};
-
-/*
- * This is the threshold value of plcp error rate per 100mSecs. It is
- * used to set and check for the validity of plcp_delta.
- */
-#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1
-#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50
-#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100
-#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200
-#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255
-#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0
-
-/* TX queue watchdog timeouts in mSecs */
-#define IWL_WATCHDOG_DISABLED 0
-#define IWL_DEF_WD_TIMEOUT 2500
-#define IWL_LONG_WD_TIMEOUT 10000
-#define IWL_MAX_WD_TIMEOUT 120000
-
-#define IWL_DEFAULT_MAX_TX_POWER 22
-
-/* Antenna presence definitions */
-#define ANT_NONE 0x0
-#define ANT_A BIT(0)
-#define ANT_B BIT(1)
-#define ANT_C BIT(2)
-#define ANT_AB (ANT_A | ANT_B)
-#define ANT_AC (ANT_A | ANT_C)
-#define ANT_BC (ANT_B | ANT_C)
-#define ANT_ABC (ANT_A | ANT_B | ANT_C)
-
-static inline u8 num_of_ant(u8 mask)
-{
- return !!((mask) & ANT_A) +
- !!((mask) & ANT_B) +
- !!((mask) & ANT_C);
-}
-
-/*
- * @max_ll_items: max number of OTP blocks
- * @shadow_ram_support: shadow support for OTP memory
- * @led_compensation: compensate on the led on/off time per HW according
- * to the deviation to achieve the desired led frequency.
- * The detail algorithm is described in iwl-led.c
- * @wd_timeout: TX queues watchdog timeout
- * @max_event_log_size: size of event log buffer size for ucode event logging
- * @shadow_reg_enable: HW shadow register support
- * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command
- * is in flight. This is due to a HW bug in 7260, 3160 and 7265.
- * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled.
- */
-struct iwl_base_params {
- int eeprom_size;
- int num_of_queues; /* def: HW dependent */
- /* for iwl_pcie_apm_init() */
- u32 pll_cfg_val;
-
- const u16 max_ll_items;
- const bool shadow_ram_support;
- u16 led_compensation;
- unsigned int wd_timeout;
- u32 max_event_log_size;
- const bool shadow_reg_enable;
- const bool pcie_l1_allowed;
- const bool apmg_wake_up_wa;
- const bool scd_chain_ext_wa;
-};
-
-/*
- * @stbc: support Tx STBC and 1*SS Rx STBC
- * @ldpc: support Tx/Rx with LDPC
- * @use_rts_for_aggregation: use rts/cts protection for HT traffic
- * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
- */
-struct iwl_ht_params {
- enum ieee80211_smps_mode smps_mode;
- const bool ht_greenfield_support; /* if used set to true */
- const bool stbc;
- const bool ldpc;
- bool use_rts_for_aggregation;
- u8 ht40_bands;
-};
-
-/*
- * Tx-backoff threshold
- * @temperature: The threshold in Celsius
- * @backoff: The tx-backoff in uSec
- */
-struct iwl_tt_tx_backoff {
- s32 temperature;
- u32 backoff;
-};
-
-#define TT_TX_BACKOFF_SIZE 6
-
-/**
- * struct iwl_tt_params - thermal throttling parameters
- * @ct_kill_entry: CT Kill entry threshold
- * @ct_kill_exit: CT Kill exit threshold
- * @ct_kill_duration: The time intervals (in uSec) in which the driver needs
- * to checks whether to exit CT Kill.
- * @dynamic_smps_entry: Dynamic SMPS entry threshold
- * @dynamic_smps_exit: Dynamic SMPS exit threshold
- * @tx_protection_entry: TX protection entry threshold
- * @tx_protection_exit: TX protection exit threshold
- * @tx_backoff: Array of thresholds for tx-backoff , in ascending order.
- * @support_ct_kill: Support CT Kill?
- * @support_dynamic_smps: Support dynamic SMPS?
- * @support_tx_protection: Support tx protection?
- * @support_tx_backoff: Support tx-backoff?
- */
-struct iwl_tt_params {
- u32 ct_kill_entry;
- u32 ct_kill_exit;
- u32 ct_kill_duration;
- u32 dynamic_smps_entry;
- u32 dynamic_smps_exit;
- u32 tx_protection_entry;
- u32 tx_protection_exit;
- struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE];
- bool support_ct_kill;
- bool support_dynamic_smps;
- bool support_tx_protection;
- bool support_tx_backoff;
-};
-
-/*
- * information on how to parse the EEPROM
- */
-#define EEPROM_REG_BAND_1_CHANNELS 0x08
-#define EEPROM_REG_BAND_2_CHANNELS 0x26
-#define EEPROM_REG_BAND_3_CHANNELS 0x42
-#define EEPROM_REG_BAND_4_CHANNELS 0x5C
-#define EEPROM_REG_BAND_5_CHANNELS 0x74
-#define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82
-#define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92
-#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80
-#define EEPROM_REGULATORY_BAND_NO_HT40 0
-
-/* lower blocks contain EEPROM image and calibration data */
-#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */
-#define OTP_LOW_IMAGE_SIZE_FAMILY_7000 (16 * 512 * sizeof(u16)) /* 16 KB */
-#define OTP_LOW_IMAGE_SIZE_FAMILY_8000 (32 * 512 * sizeof(u16)) /* 32 KB */
-
-struct iwl_eeprom_params {
- const u8 regulatory_bands[7];
- bool enhanced_txpower;
-};
-
-/* Tx-backoff power threshold
- * @pwr: The power limit in mw
- * @backoff: The tx-backoff in uSec
- */
-struct iwl_pwr_tx_backoff {
- u32 pwr;
- u32 backoff;
-};
-
-/**
- * struct iwl_cfg
- * @name: Official name of the device
- * @fw_name_pre: Firmware filename prefix. The api version and extension
- * (.ucode) will be added to filename before loading from disk. The
- * filename is constructed as fw_name_pre<api>.ucode.
- * @ucode_api_max: Highest version of uCode API supported by driver.
- * @ucode_api_ok: oldest version of the uCode API that is OK to load
- * without a warning, for use in transitions
- * @ucode_api_min: Lowest version of uCode API supported by driver.
- * @max_inst_size: The maximal length of the fw inst section
- * @max_data_size: The maximal length of the fw data section
- * @valid_tx_ant: valid transmit antenna
- * @valid_rx_ant: valid receive antenna
- * @non_shared_ant: the antenna that is for WiFi only
- * @nvm_ver: NVM version
- * @nvm_calib_ver: NVM calibration version
- * @lib: pointer to the lib ops
- * @base_params: pointer to basic parameters
- * @ht_params: point to ht parameters
- * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
- * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
- * @internal_wimax_coex: internal wifi/wimax combo device
- * @high_temp: Is this NIC is designated to be in high temperature.
- * @host_interrupt_operation_mode: device needs host interrupt operation
- * mode set
- * @d0i3: device uses d0i3 instead of d3
- * @nvm_hw_section_num: the ID of the HW NVM section
- * @features: hw features, any combination of feature_whitelist
- * @pwr_tx_backoffs: translation table between power limits and backoffs
- * @max_rx_agg_size: max RX aggregation size of the ADDBA request/response
- * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response
- * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the
- * station can receive in HT
- * @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the
- * station can receive in VHT
- * @dccm_offset: offset from which DCCM begins
- * @dccm_len: length of DCCM (including runtime stack CCM)
- * @dccm2_offset: offset from which the second DCCM begins
- * @dccm2_len: length of the second DCCM
- * @smem_offset: offset from which the SMEM begins
- * @smem_len: the length of SMEM
- *
- * We enable the driver to be backward compatible wrt. hardware features.
- * API differences in uCode shouldn't be handled here but through TLVs
- * and/or the uCode API version instead.
- */
-struct iwl_cfg {
- /* params specific to an individual device within a device family */
- const char *name;
- const char *fw_name_pre;
- const unsigned int ucode_api_max;
- const unsigned int ucode_api_ok;
- const unsigned int ucode_api_min;
- const enum iwl_device_family device_family;
- const u32 max_data_size;
- const u32 max_inst_size;
- u8 valid_tx_ant;
- u8 valid_rx_ant;
- u8 non_shared_ant;
- bool bt_shared_single_ant;
- u16 nvm_ver;
- u16 nvm_calib_ver;
- /* params not likely to change within a device family */
- const struct iwl_base_params *base_params;
- /* params likely to change within a device family */
- const struct iwl_ht_params *ht_params;
- const struct iwl_eeprom_params *eeprom_params;
- enum iwl_led_mode led_mode;
- const bool rx_with_siso_diversity;
- const bool internal_wimax_coex;
- const bool host_interrupt_operation_mode;
- bool high_temp;
- bool d0i3;
- u8 nvm_hw_section_num;
- bool lp_xtal_workaround;
- const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
- bool no_power_up_nic_in_init;
- const char *default_nvm_file_B_step;
- const char *default_nvm_file_C_step;
- netdev_features_t features;
- unsigned int max_rx_agg_size;
- bool disable_dummy_notification;
- unsigned int max_tx_agg_size;
- unsigned int max_ht_ampdu_exponent;
- unsigned int max_vht_ampdu_exponent;
- const u32 dccm_offset;
- const u32 dccm_len;
- const u32 dccm2_offset;
- const u32 dccm2_len;
- const u32 smem_offset;
- const u32 smem_len;
- const struct iwl_tt_params *thermal_params;
- bool apmg_not_supported;
-};
-
-/*
- * This list declares the config structures for all devices.
- */
-#if IS_ENABLED(CONFIG_IWLDVM)
-extern const struct iwl_cfg iwl5300_agn_cfg;
-extern const struct iwl_cfg iwl5100_agn_cfg;
-extern const struct iwl_cfg iwl5350_agn_cfg;
-extern const struct iwl_cfg iwl5100_bgn_cfg;
-extern const struct iwl_cfg iwl5100_abg_cfg;
-extern const struct iwl_cfg iwl5150_agn_cfg;
-extern const struct iwl_cfg iwl5150_abg_cfg;
-extern const struct iwl_cfg iwl6005_2agn_cfg;
-extern const struct iwl_cfg iwl6005_2abg_cfg;
-extern const struct iwl_cfg iwl6005_2bg_cfg;
-extern const struct iwl_cfg iwl6005_2agn_sff_cfg;
-extern const struct iwl_cfg iwl6005_2agn_d_cfg;
-extern const struct iwl_cfg iwl6005_2agn_mow1_cfg;
-extern const struct iwl_cfg iwl6005_2agn_mow2_cfg;
-extern const struct iwl_cfg iwl1030_bgn_cfg;
-extern const struct iwl_cfg iwl1030_bg_cfg;
-extern const struct iwl_cfg iwl6030_2agn_cfg;
-extern const struct iwl_cfg iwl6030_2abg_cfg;
-extern const struct iwl_cfg iwl6030_2bgn_cfg;
-extern const struct iwl_cfg iwl6030_2bg_cfg;
-extern const struct iwl_cfg iwl6000i_2agn_cfg;
-extern const struct iwl_cfg iwl6000i_2abg_cfg;
-extern const struct iwl_cfg iwl6000i_2bg_cfg;
-extern const struct iwl_cfg iwl6000_3agn_cfg;
-extern const struct iwl_cfg iwl6050_2agn_cfg;
-extern const struct iwl_cfg iwl6050_2abg_cfg;
-extern const struct iwl_cfg iwl6150_bgn_cfg;
-extern const struct iwl_cfg iwl6150_bg_cfg;
-extern const struct iwl_cfg iwl1000_bgn_cfg;
-extern const struct iwl_cfg iwl1000_bg_cfg;
-extern const struct iwl_cfg iwl100_bgn_cfg;
-extern const struct iwl_cfg iwl100_bg_cfg;
-extern const struct iwl_cfg iwl130_bgn_cfg;
-extern const struct iwl_cfg iwl130_bg_cfg;
-extern const struct iwl_cfg iwl2000_2bgn_cfg;
-extern const struct iwl_cfg iwl2000_2bgn_d_cfg;
-extern const struct iwl_cfg iwl2030_2bgn_cfg;
-extern const struct iwl_cfg iwl6035_2agn_cfg;
-extern const struct iwl_cfg iwl6035_2agn_sff_cfg;
-extern const struct iwl_cfg iwl105_bgn_cfg;
-extern const struct iwl_cfg iwl105_bgn_d_cfg;
-extern const struct iwl_cfg iwl135_bgn_cfg;
-#endif /* CONFIG_IWLDVM */
-#if IS_ENABLED(CONFIG_IWLMVM)
-extern const struct iwl_cfg iwl7260_2ac_cfg;
-extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp;
-extern const struct iwl_cfg iwl7260_2n_cfg;
-extern const struct iwl_cfg iwl7260_n_cfg;
-extern const struct iwl_cfg iwl3160_2ac_cfg;
-extern const struct iwl_cfg iwl3160_2n_cfg;
-extern const struct iwl_cfg iwl3160_n_cfg;
-extern const struct iwl_cfg iwl3165_2ac_cfg;
-extern const struct iwl_cfg iwl7265_2ac_cfg;
-extern const struct iwl_cfg iwl7265_2n_cfg;
-extern const struct iwl_cfg iwl7265_n_cfg;
-extern const struct iwl_cfg iwl7265d_2ac_cfg;
-extern const struct iwl_cfg iwl7265d_2n_cfg;
-extern const struct iwl_cfg iwl7265d_n_cfg;
-extern const struct iwl_cfg iwl8260_2n_cfg;
-extern const struct iwl_cfg iwl8260_2ac_cfg;
-extern const struct iwl_cfg iwl4165_2ac_cfg;
-extern const struct iwl_cfg iwl8260_2ac_sdio_cfg;
-extern const struct iwl_cfg iwl4165_2ac_sdio_cfg;
-#endif /* CONFIG_IWLMVM */
-
-#endif /* __IWL_CONFIG_H__ */
projects / cascardo / linux.git / blobdiff