+++ /dev/null
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#ifndef __iwl_fw_file_h__
-#define __iwl_fw_file_h__
-
-#include <linux/netdevice.h>
-#include <linux/nl80211.h>
-
-/* v1/v2 uCode file layout */
-struct iwl_ucode_header {
- __le32 ver; /* major/minor/API/serial */
- union {
- struct {
- __le32 inst_size; /* bytes of runtime code */
- __le32 data_size; /* bytes of runtime data */
- __le32 init_size; /* bytes of init code */
- __le32 init_data_size; /* bytes of init data */
- __le32 boot_size; /* bytes of bootstrap code */
- u8 data[0]; /* in same order as sizes */
- } v1;
- struct {
- __le32 build; /* build number */
- __le32 inst_size; /* bytes of runtime code */
- __le32 data_size; /* bytes of runtime data */
- __le32 init_size; /* bytes of init code */
- __le32 init_data_size; /* bytes of init data */
- __le32 boot_size; /* bytes of bootstrap code */
- u8 data[0]; /* in same order as sizes */
- } v2;
- } u;
-};
-
-/*
- * new TLV uCode file layout
- *
- * The new TLV file format contains TLVs, that each specify
- * some piece of data.
- */
-
-enum iwl_ucode_tlv_type {
- IWL_UCODE_TLV_INVALID = 0, /* unused */
- IWL_UCODE_TLV_INST = 1,
- IWL_UCODE_TLV_DATA = 2,
- IWL_UCODE_TLV_INIT = 3,
- IWL_UCODE_TLV_INIT_DATA = 4,
- IWL_UCODE_TLV_BOOT = 5,
- IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */
- IWL_UCODE_TLV_PAN = 7,
- IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8,
- IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9,
- IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10,
- IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11,
- IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12,
- IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13,
- IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14,
- IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
- IWL_UCODE_TLV_WOWLAN_INST = 16,
- IWL_UCODE_TLV_WOWLAN_DATA = 17,
- IWL_UCODE_TLV_FLAGS = 18,
- IWL_UCODE_TLV_SEC_RT = 19,
- IWL_UCODE_TLV_SEC_INIT = 20,
- IWL_UCODE_TLV_SEC_WOWLAN = 21,
- IWL_UCODE_TLV_DEF_CALIB = 22,
- IWL_UCODE_TLV_PHY_SKU = 23,
- IWL_UCODE_TLV_SECURE_SEC_RT = 24,
- IWL_UCODE_TLV_SECURE_SEC_INIT = 25,
- IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
- IWL_UCODE_TLV_NUM_OF_CPU = 27,
- IWL_UCODE_TLV_CSCHEME = 28,
- IWL_UCODE_TLV_API_CHANGES_SET = 29,
- IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30,
- IWL_UCODE_TLV_N_SCAN_CHANNELS = 31,
- IWL_UCODE_TLV_PAGING = 32,
- IWL_UCODE_TLV_SEC_RT_USNIFFER = 34,
- IWL_UCODE_TLV_SDIO_ADMA_ADDR = 35,
- IWL_UCODE_TLV_FW_VERSION = 36,
- IWL_UCODE_TLV_FW_DBG_DEST = 38,
- IWL_UCODE_TLV_FW_DBG_CONF = 39,
- IWL_UCODE_TLV_FW_DBG_TRIGGER = 40,
- IWL_UCODE_TLV_FW_GSCAN_CAPA = 50,
-};
-
-struct iwl_ucode_tlv {
- __le32 type; /* see above */
- __le32 length; /* not including type/length fields */
- u8 data[0];
-};
-
-#define IWL_TLV_UCODE_MAGIC 0x0a4c5749
-#define FW_VER_HUMAN_READABLE_SZ 64
-
-struct iwl_tlv_ucode_header {
- /*
- * The TLV style ucode header is distinguished from
- * the v1/v2 style header by first four bytes being
- * zero, as such is an invalid combination of
- * major/minor/API/serial versions.
- */
- __le32 zero;
- __le32 magic;
- u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
- /* major/minor/API/serial or major in new format */
- __le32 ver;
- __le32 build;
- __le64 ignore;
- /*
- * The data contained herein has a TLV layout,
- * see above for the TLV header and types.
- * Note that each TLV is padded to a length
- * that is a multiple of 4 for alignment.
- */
- u8 data[0];
-};
-
-/*
- * ucode TLVs
- *
- * ability to get extension for: flags & capabilities from ucode binaries files
- */
-struct iwl_ucode_api {
- __le32 api_index;
- __le32 api_flags;
-} __packed;
-
-struct iwl_ucode_capa {
- __le32 api_index;
- __le32 api_capa;
-} __packed;
-
-/**
- * enum iwl_ucode_tlv_flag - ucode API flags
- * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
- * was a separate TLV but moved here to save space.
- * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
- * treats good CRC threshold as a boolean
- * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
- * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
- * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
- * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
- * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
- * offload profile config command.
- * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
- * (rather than two) IPv6 addresses
- * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
- * from the probe request template.
- * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
- * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
- * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
- * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
- * P2P client interfaces simultaneously if they are in different bindings.
- * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
- * P2P client interfaces simultaneously if they are in same bindings.
- * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
- * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
- * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
- * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
- * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
- */
-enum iwl_ucode_tlv_flag {
- IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
- IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
- IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
- IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
- IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
- IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
- IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
- IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
- IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
- IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
- IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21),
- IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22),
- IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23),
- IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
- IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25),
- IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
- IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
- IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30),
-};
-
-typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t;
-
-/**
- * enum iwl_ucode_tlv_api - ucode api
- * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
- * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
- * longer than the passive one, which is essential for fragmented scan.
- * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
- * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header
- * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
- * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
- * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority
- * instead of 3.
- * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size
- * (command version 3) that supports per-chain limits
- *
- * @NUM_IWL_UCODE_TLV_API: number of bits used
- */
-enum iwl_ucode_tlv_api {
- IWL_UCODE_TLV_API_BT_COEX_SPLIT = (__force iwl_ucode_tlv_api_t)3,
- IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8,
- IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9,
- IWL_UCODE_TLV_API_WIDE_CMD_HDR = (__force iwl_ucode_tlv_api_t)14,
- IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18,
- IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20,
- IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY = (__force iwl_ucode_tlv_api_t)24,
- IWL_UCODE_TLV_API_TX_POWER_CHAIN = (__force iwl_ucode_tlv_api_t)27,
-
- NUM_IWL_UCODE_TLV_API
-#ifdef __CHECKER__
- /* sparse says it cannot increment the previous enum member */
- = 128
-#endif
-};
-
-typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
-
-/**
- * enum iwl_ucode_tlv_capa - ucode capabilities
- * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
- * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
- * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
- * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
- * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
- * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
- * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
- * tx power value into TPC Report action frame and Link Measurement Report
- * action frame
- * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
- * channel in DS parameter set element in probe requests.
- * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
- * probe requests.
- * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
- * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
- * which also implies support for the scheduler configuration command
- * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
- * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
- * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
- * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
- * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
- * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
- * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
- * sources for the MCC. This TLV bit is a future replacement to
- * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
- * is supported.
- * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
- * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
- * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
- * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
- *
- * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
- */
-enum iwl_ucode_tlv_capa {
- IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0,
- IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1,
- IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2,
- IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3,
- IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5,
- IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6,
- IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8,
- IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9,
- IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10,
- IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11,
- IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12,
- IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13,
- IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18,
- IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19,
- IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21,
- IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22,
- IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28,
- IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29,
- IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30,
- IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31,
- IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64,
- IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = (__force iwl_ucode_tlv_capa_t)65,
-
- NUM_IWL_UCODE_TLV_CAPA
-#ifdef __CHECKER__
- /* sparse says it cannot increment the previous enum member */
- = 128
-#endif
-};
-
-/* The default calibrate table size if not specified by firmware file */
-#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
-#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
-#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
-
-/* The default max probe length if not specified by the firmware file */
-#define IWL_DEFAULT_MAX_PROBE_LENGTH 200
-
-/*
- * For 16.0 uCode and above, there is no differentiation between sections,
- * just an offset to the HW address.
- */
-#define IWL_UCODE_SECTION_MAX 16
-#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
-#define PAGING_SEPARATOR_SECTION 0xAAAABBBB
-
-/* uCode version contains 4 values: Major/Minor/API/Serial */
-#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
-#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
-#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
-#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
-
-/*
- * Calibration control struct.
- * Sent as part of the phy configuration command.
- * @flow_trigger: bitmap for which calibrations to perform according to
- * flow triggers.
- * @event_trigger: bitmap for which calibrations to perform according to
- * event triggers.
- */
-struct iwl_tlv_calib_ctrl {
- __le32 flow_trigger;
- __le32 event_trigger;
-} __packed;
-
-enum iwl_fw_phy_cfg {
- FW_PHY_CFG_RADIO_TYPE_POS = 0,
- FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
- FW_PHY_CFG_RADIO_STEP_POS = 2,
- FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
- FW_PHY_CFG_RADIO_DASH_POS = 4,
- FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
- FW_PHY_CFG_TX_CHAIN_POS = 16,
- FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
- FW_PHY_CFG_RX_CHAIN_POS = 20,
- FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
-};
-
-#define IWL_UCODE_MAX_CS 1
-
-/**
- * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
- * @cipher: a cipher suite selector
- * @flags: cipher scheme flags (currently reserved for a future use)
- * @hdr_len: a size of MPDU security header
- * @pn_len: a size of PN
- * @pn_off: an offset of pn from the beginning of the security header
- * @key_idx_off: an offset of key index byte in the security header
- * @key_idx_mask: a bit mask of key_idx bits
- * @key_idx_shift: bit shift needed to get key_idx
- * @mic_len: mic length in bytes
- * @hw_cipher: a HW cipher index used in host commands
- */
-struct iwl_fw_cipher_scheme {
- __le32 cipher;
- u8 flags;
- u8 hdr_len;
- u8 pn_len;
- u8 pn_off;
- u8 key_idx_off;
- u8 key_idx_mask;
- u8 key_idx_shift;
- u8 mic_len;
- u8 hw_cipher;
-} __packed;
-
-enum iwl_fw_dbg_reg_operator {
- CSR_ASSIGN,
- CSR_SETBIT,
- CSR_CLEARBIT,
-
- PRPH_ASSIGN,
- PRPH_SETBIT,
- PRPH_CLEARBIT,
-
- INDIRECT_ASSIGN,
- INDIRECT_SETBIT,
- INDIRECT_CLEARBIT,
-
- PRPH_BLOCKBIT,
-};
-
-/**
- * struct iwl_fw_dbg_reg_op - an operation on a register
- *
- * @op: %enum iwl_fw_dbg_reg_operator
- * @addr: offset of the register
- * @val: value
- */
-struct iwl_fw_dbg_reg_op {
- u8 op;
- u8 reserved[3];
- __le32 addr;
- __le32 val;
-} __packed;
-
-/**
- * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
- *
- * @SMEM_MODE: monitor stores the data in SMEM
- * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
- * @MARBH_MODE: monitor stores the data in MARBH buffer
- * @MIPI_MODE: monitor outputs the data through the MIPI interface
- */
-enum iwl_fw_dbg_monitor_mode {
- SMEM_MODE = 0,
- EXTERNAL_MODE = 1,
- MARBH_MODE = 2,
- MIPI_MODE = 3,
-};
-
-/**
- * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
- *
- * @version: version of the TLV - currently 0
- * @monitor_mode: %enum iwl_fw_dbg_monitor_mode
- * @size_power: buffer size will be 2^(size_power + 11)
- * @base_reg: addr of the base addr register (PRPH)
- * @end_reg: addr of the end addr register (PRPH)
- * @write_ptr_reg: the addr of the reg of the write pointer
- * @wrap_count: the addr of the reg of the wrap_count
- * @base_shift: shift right of the base addr reg
- * @end_shift: shift right of the end addr reg
- * @reg_ops: array of registers operations
- *
- * This parses IWL_UCODE_TLV_FW_DBG_DEST
- */
-struct iwl_fw_dbg_dest_tlv {
- u8 version;
- u8 monitor_mode;
- u8 size_power;
- u8 reserved;
- __le32 base_reg;
- __le32 end_reg;
- __le32 write_ptr_reg;
- __le32 wrap_count;
- u8 base_shift;
- u8 end_shift;
- struct iwl_fw_dbg_reg_op reg_ops[0];
-} __packed;
-
-struct iwl_fw_dbg_conf_hcmd {
- u8 id;
- u8 reserved;
- __le16 len;
- u8 data[0];
-} __packed;
-
-/**
- * enum iwl_fw_dbg_trigger_mode - triggers functionalities
- *
- * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
- * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
- * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
- * collect only monitor data
- */
-enum iwl_fw_dbg_trigger_mode {
- IWL_FW_DBG_TRIGGER_START = BIT(0),
- IWL_FW_DBG_TRIGGER_STOP = BIT(1),
- IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
-};
-
-/**
- * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
- * @IWL_FW_DBG_CONF_VIF_ANY: any vif type
- * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
- * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
- * @IWL_FW_DBG_CONF_VIF_AP: AP mode
- * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
- * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
- * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
- */
-enum iwl_fw_dbg_trigger_vif_type {
- IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
- IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
- IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
- IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
- IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
- IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
- IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
-};
-
-/**
- * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
- * @id: %enum iwl_fw_dbg_trigger
- * @vif_type: %enum iwl_fw_dbg_trigger_vif_type
- * @stop_conf_ids: bitmap of configurations this trigger relates to.
- * if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
- * to the currently running configuration is set, the data should be
- * collected.
- * @stop_delay: how many milliseconds to wait before collecting the data
- * after the STOP trigger fires.
- * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both
- * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
- * configuration should be applied when the triggers kicks in.
- * @occurrences: number of occurrences. 0 means the trigger will never fire.
- */
-struct iwl_fw_dbg_trigger_tlv {
- __le32 id;
- __le32 vif_type;
- __le32 stop_conf_ids;
- __le32 stop_delay;
- u8 mode;
- u8 start_conf_id;
- __le16 occurrences;
- __le32 reserved[2];
-
- u8 data[0];
-} __packed;
-
-#define FW_DBG_START_FROM_ALIVE 0
-#define FW_DBG_CONF_MAX 32
-#define FW_DBG_INVALID 0xff
-
-/**
- * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
- * @stop_consec_missed_bcon: stop recording if threshold is crossed.
- * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
- * @start_consec_missed_bcon: start recording if threshold is crossed.
- * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
- * @reserved1: reserved
- * @reserved2: reserved
- */
-struct iwl_fw_dbg_trigger_missed_bcon {
- __le32 stop_consec_missed_bcon;
- __le32 stop_consec_missed_bcon_since_rx;
- __le32 reserved2[2];
- __le32 start_consec_missed_bcon;
- __le32 start_consec_missed_bcon_since_rx;
- __le32 reserved1[2];
-} __packed;
-
-/**
- * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
- * cmds: the list of commands to trigger the collection on
- */
-struct iwl_fw_dbg_trigger_cmd {
- struct cmd {
- u8 cmd_id;
- u8 group_id;
- } __packed cmds[16];
-} __packed;
-
-/**
- * iwl_fw_dbg_trigger_stats - configures trigger for statistics
- * @stop_offset: the offset of the value to be monitored
- * @stop_threshold: the threshold above which to collect
- * @start_offset: the offset of the value to be monitored
- * @start_threshold: the threshold above which to start recording
- */
-struct iwl_fw_dbg_trigger_stats {
- __le32 stop_offset;
- __le32 stop_threshold;
- __le32 start_offset;
- __le32 start_threshold;
-} __packed;
-
-/**
- * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
- * @rssi: RSSI value to trigger at
- */
-struct iwl_fw_dbg_trigger_low_rssi {
- __le32 rssi;
-} __packed;
-
-/**
- * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
- * @stop_auth_denied: number of denied authentication to collect
- * @stop_auth_timeout: number of authentication timeout to collect
- * @stop_rx_deauth: number of Rx deauth before to collect
- * @stop_tx_deauth: number of Tx deauth before to collect
- * @stop_assoc_denied: number of denied association to collect
- * @stop_assoc_timeout: number of association timeout to collect
- * @stop_connection_loss: number of connection loss to collect
- * @start_auth_denied: number of denied authentication to start recording
- * @start_auth_timeout: number of authentication timeout to start recording
- * @start_rx_deauth: number of Rx deauth to start recording
- * @start_tx_deauth: number of Tx deauth to start recording
- * @start_assoc_denied: number of denied association to start recording
- * @start_assoc_timeout: number of association timeout to start recording
- * @start_connection_loss: number of connection loss to start recording
- */
-struct iwl_fw_dbg_trigger_mlme {
- u8 stop_auth_denied;
- u8 stop_auth_timeout;
- u8 stop_rx_deauth;
- u8 stop_tx_deauth;
-
- u8 stop_assoc_denied;
- u8 stop_assoc_timeout;
- u8 stop_connection_loss;
- u8 reserved;
-
- u8 start_auth_denied;
- u8 start_auth_timeout;
- u8 start_rx_deauth;
- u8 start_tx_deauth;
-
- u8 start_assoc_denied;
- u8 start_assoc_timeout;
- u8 start_connection_loss;
- u8 reserved2;
-} __packed;
-
-/**
- * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
- * @command_queue: timeout for the command queue in ms
- * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
- * @softap: timeout for the queues of a softAP in ms
- * @p2p_go: timeout for the queues of a P2P GO in ms
- * @p2p_client: timeout for the queues of a P2P client in ms
- * @p2p_device: timeout for the queues of a P2P device in ms
- * @ibss: timeout for the queues of an IBSS in ms
- * @tdls: timeout for the queues of a TDLS station in ms
- */
-struct iwl_fw_dbg_trigger_txq_timer {
- __le32 command_queue;
- __le32 bss;
- __le32 softap;
- __le32 p2p_go;
- __le32 p2p_client;
- __le32 p2p_device;
- __le32 ibss;
- __le32 tdls;
- __le32 reserved[4];
-} __packed;
-
-/**
- * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
- * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
- * trigger each time a time event notification that relates to time event
- * id with one of the actions in the bitmap is received and
- * BIT(notif->status) is set in status_bitmap.
- *
- */
-struct iwl_fw_dbg_trigger_time_event {
- struct {
- __le32 id;
- __le32 action_bitmap;
- __le32 status_bitmap;
- } __packed time_events[16];
-} __packed;
-
-/**
- * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
- * rx_ba_start: tid bitmap to configure on what tid the trigger should occur
- * when an Rx BlockAck session is started.
- * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
- * when an Rx BlockAck session is stopped.
- * tx_ba_start: tid bitmap to configure on what tid the trigger should occur
- * when a Tx BlockAck session is started.
- * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
- * when a Tx BlockAck session is stopped.
- * rx_bar: tid bitmap to configure on what tid the trigger should occur
- * when a BAR is received (for a Tx BlockAck session).
- * tx_bar: tid bitmap to configure on what tid the trigger should occur
- * when a BAR is send (for an Rx BlocAck session).
- * frame_timeout: tid bitmap to configure on what tid the trigger should occur
- * when a frame times out in the reodering buffer.
- */
-struct iwl_fw_dbg_trigger_ba {
- __le16 rx_ba_start;
- __le16 rx_ba_stop;
- __le16 tx_ba_start;
- __le16 tx_ba_stop;
- __le16 rx_bar;
- __le16 tx_bar;
- __le16 frame_timeout;
-} __packed;
-
-/**
- * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
- * @id: conf id
- * @usniffer: should the uSniffer image be used
- * @num_of_hcmds: how many HCMDs to send are present here
- * @hcmd: a variable length host command to be sent to apply the configuration.
- * If there is more than one HCMD to send, they will appear one after the
- * other and be sent in the order that they appear in.
- * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
- * %FW_DBG_CONF_MAX configuration per run.
- */
-struct iwl_fw_dbg_conf_tlv {
- u8 id;
- u8 usniffer;
- u8 reserved;
- u8 num_of_hcmds;
- struct iwl_fw_dbg_conf_hcmd hcmd;
-} __packed;
-
-/**
- * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW
- * @max_scan_cache_size: total space allocated for scan results (in bytes).
- * @max_scan_buckets: maximum number of channel buckets.
- * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan.
- * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI.
- * @max_scan_reporting_threshold: max possible report threshold. in percentage.
- * @max_hotlist_aps: maximum number of entries for hotlist APs.
- * @max_significant_change_aps: maximum number of entries for significant
- * change APs.
- * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can
- * hold.
- */
-struct iwl_fw_gscan_capabilities {
- __le32 max_scan_cache_size;
- __le32 max_scan_buckets;
- __le32 max_ap_cache_per_scan;
- __le32 max_rssi_sample_size;
- __le32 max_scan_reporting_threshold;
- __le32 max_hotlist_aps;
- __le32 max_significant_change_aps;
- __le32 max_bssid_history_entries;
-} __packed;
-
-#endif /* __iwl_fw_file_h__ */
projects / cascardo / linux.git / blobdiff