+++ /dev/null
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#ifndef __fw_api_tx_h__
-#define __fw_api_tx_h__
-
-/**
- * enum iwl_tx_flags - bitmasks for tx_flags in TX command
- * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
- * @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame
- * @TX_CMD_FLG_ACK: expect ACK from receiving station
- * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
- * Otherwise, use rate_n_flags from the TX command
- * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
- * Must set TX_CMD_FLG_ACK with this flag.
- * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
- * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
- * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
- * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored
- * on old firmwares).
- * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame
- * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
- * Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
- * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
- * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
- * Should be set for beacons and probe responses
- * @TX_CMD_FLG_CALIB: activate PA TX power calibrations
- * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
- * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
- * Should be set for 26/30 length MAC headers
- * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
- * @TX_CMD_FLG_CCMP_AGG: this frame uses CCMP for aggregation acceleration
- * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
- * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
- * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
- * @TX_CMD_FLG_EXEC_PAPD: execute PAPD
- * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
- * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
- */
-enum iwl_tx_flags {
- TX_CMD_FLG_PROT_REQUIRE = BIT(0),
- TX_CMD_FLG_WRITE_TX_POWER = BIT(1),
- TX_CMD_FLG_ACK = BIT(3),
- TX_CMD_FLG_STA_RATE = BIT(4),
- TX_CMD_FLG_BAR = BIT(6),
- TX_CMD_FLG_TXOP_PROT = BIT(7),
- TX_CMD_FLG_VHT_NDPA = BIT(8),
- TX_CMD_FLG_HT_NDPA = BIT(9),
- TX_CMD_FLG_CSI_FDBK2HOST = BIT(10),
- TX_CMD_FLG_BT_PRIO_POS = 11,
- TX_CMD_FLG_BT_DIS = BIT(12),
- TX_CMD_FLG_SEQ_CTL = BIT(13),
- TX_CMD_FLG_MORE_FRAG = BIT(14),
- TX_CMD_FLG_TSF = BIT(16),
- TX_CMD_FLG_CALIB = BIT(17),
- TX_CMD_FLG_KEEP_SEQ_CTL = BIT(18),
- TX_CMD_FLG_MH_PAD = BIT(20),
- TX_CMD_FLG_RESP_TO_DRV = BIT(21),
- TX_CMD_FLG_CCMP_AGG = BIT(22),
- TX_CMD_FLG_TKIP_MIC_DONE = BIT(23),
- TX_CMD_FLG_DUR = BIT(25),
- TX_CMD_FLG_FW_DROP = BIT(26),
- TX_CMD_FLG_EXEC_PAPD = BIT(27),
- TX_CMD_FLG_PAPD_TYPE = BIT(28),
- TX_CMD_FLG_HCCA_CHUNK = BIT(31)
-}; /* TX_FLAGS_BITS_API_S_VER_1 */
-
-/**
- * enum iwl_tx_pm_timeouts - pm timeout values in TX command
- * @PM_FRAME_NONE: no need to suspend sleep mode
- * @PM_FRAME_MGMT: fw suspend sleep mode for 100TU
- * @PM_FRAME_ASSOC: fw suspend sleep mode for 10sec
- */
-enum iwl_tx_pm_timeouts {
- PM_FRAME_NONE = 0,
- PM_FRAME_MGMT = 2,
- PM_FRAME_ASSOC = 3,
-};
-
-/*
- * TX command security control
- */
-#define TX_CMD_SEC_WEP 0x01
-#define TX_CMD_SEC_CCM 0x02
-#define TX_CMD_SEC_TKIP 0x03
-#define TX_CMD_SEC_EXT 0x04
-#define TX_CMD_SEC_MSK 0x07
-#define TX_CMD_SEC_WEP_KEY_IDX_POS 6
-#define TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0
-#define TX_CMD_SEC_KEY128 0x08
-
-/* TODO: how does these values are OK with only 16 bit variable??? */
-/*
- * TX command next frame info
- *
- * bits 0:2 - security control (TX_CMD_SEC_*)
- * bit 3 - immediate ACK required
- * bit 4 - rate is taken from STA table
- * bit 5 - frame belongs to BA stream
- * bit 6 - immediate BA response expected
- * bit 7 - unused
- * bits 8:15 - Station ID
- * bits 16:31 - rate
- */
-#define TX_CMD_NEXT_FRAME_ACK_MSK (0x8)
-#define TX_CMD_NEXT_FRAME_STA_RATE_MSK (0x10)
-#define TX_CMD_NEXT_FRAME_BA_MSK (0x20)
-#define TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK (0x40)
-#define TX_CMD_NEXT_FRAME_FLAGS_MSK (0xf8)
-#define TX_CMD_NEXT_FRAME_STA_ID_MSK (0xff00)
-#define TX_CMD_NEXT_FRAME_STA_ID_POS (8)
-#define TX_CMD_NEXT_FRAME_RATE_MSK (0xffff0000)
-#define TX_CMD_NEXT_FRAME_RATE_POS (16)
-
-/*
- * TX command Frame life time in us - to be written in pm_frame_timeout
- */
-#define TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF
-#define TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/
-#define TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */
-#define TX_CMD_LIFE_TIME_EXPIRED_FRAME 0
-
-/*
- * TID for non QoS frames - to be written in tid_tspec
- */
-#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT
-
-/*
- * Limits on the retransmissions - to be written in {data,rts}_retry_limit
- */
-#define IWL_DEFAULT_TX_RETRY 15
-#define IWL_MGMT_DFAULT_RETRY_LIMIT 3
-#define IWL_RTS_DFAULT_RETRY_LIMIT 60
-#define IWL_BAR_DFAULT_RETRY_LIMIT 60
-#define IWL_LOW_RETRY_LIMIT 7
-
-/* TODO: complete documentation for try_cnt and btkill_cnt */
-/**
- * struct iwl_tx_cmd - TX command struct to FW
- * ( TX_CMD = 0x1c )
- * @len: in bytes of the payload, see below for details
- * @tx_flags: combination of TX_CMD_FLG_*
- * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
- * cleared. Combination of RATE_MCS_*
- * @sta_id: index of destination station in FW station table
- * @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
- * Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
- * @key: security key
- * @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
- * @life_time: frame life time (usecs??)
- * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
- * btkill_cnd + reserved), first 32 bits. "0" disables usage.
- * @dram_msb_ptr: upper bits of the scratch physical address
- * @rts_retry_limit: max attempts for RTS
- * @data_retry_limit: max attempts to send the data packet
- * @tid_spec: TID/tspec
- * @pm_frame_timeout: PM TX frame timeout
- *
- * The byte count (both len and next_frame_len) includes MAC header
- * (24/26/30/32 bytes)
- * + 2 bytes pad if 26/30 header size
- * + 8 byte IV for CCM or TKIP (not used for WEP)
- * + Data payload
- * + 8-byte MIC (not used for CCM/WEP)
- * It does not include post-MAC padding, i.e.,
- * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
- * Range of len: 14-2342 bytes.
- *
- * After the struct fields the MAC header is placed, plus any padding,
- * and then the actial payload.
- */
-struct iwl_tx_cmd {
- __le16 len;
- __le16 next_frame_len;
- __le32 tx_flags;
- struct {
- u8 try_cnt;
- u8 btkill_cnt;
- __le16 reserved;
- } scratch; /* DRAM_SCRATCH_API_U_VER_1 */
- __le32 rate_n_flags;
- u8 sta_id;
- u8 sec_ctl;
- u8 initial_rate_index;
- u8 reserved2;
- u8 key[16];
- __le32 reserved3;
- __le32 life_time;
- __le32 dram_lsb_ptr;
- u8 dram_msb_ptr;
- u8 rts_retry_limit;
- u8 data_retry_limit;
- u8 tid_tspec;
- __le16 pm_frame_timeout;
- __le16 reserved4;
- u8 payload[0];
- struct ieee80211_hdr hdr[0];
-} __packed; /* TX_CMD_API_S_VER_3 */
-
-/*
- * TX response related data
- */
-
-/*
- * enum iwl_tx_status - status that is returned by the fw after attempts to Tx
- * @TX_STATUS_SUCCESS:
- * @TX_STATUS_DIRECT_DONE:
- * @TX_STATUS_POSTPONE_DELAY:
- * @TX_STATUS_POSTPONE_FEW_BYTES:
- * @TX_STATUS_POSTPONE_BT_PRIO:
- * @TX_STATUS_POSTPONE_QUIET_PERIOD:
- * @TX_STATUS_POSTPONE_CALC_TTAK:
- * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
- * @TX_STATUS_FAIL_SHORT_LIMIT:
- * @TX_STATUS_FAIL_LONG_LIMIT:
- * @TX_STATUS_FAIL_UNDERRUN:
- * @TX_STATUS_FAIL_DRAIN_FLOW:
- * @TX_STATUS_FAIL_RFKILL_FLUSH:
- * @TX_STATUS_FAIL_LIFE_EXPIRE:
- * @TX_STATUS_FAIL_DEST_PS:
- * @TX_STATUS_FAIL_HOST_ABORTED:
- * @TX_STATUS_FAIL_BT_RETRY:
- * @TX_STATUS_FAIL_STA_INVALID:
- * @TX_TATUS_FAIL_FRAG_DROPPED:
- * @TX_STATUS_FAIL_TID_DISABLE:
- * @TX_STATUS_FAIL_FIFO_FLUSHED:
- * @TX_STATUS_FAIL_SMALL_CF_POLL:
- * @TX_STATUS_FAIL_FW_DROP:
- * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
- * STA table
- * @TX_FRAME_STATUS_INTERNAL_ABORT:
- * @TX_MODE_MSK:
- * @TX_MODE_NO_BURST:
- * @TX_MODE_IN_BURST_SEQ:
- * @TX_MODE_FIRST_IN_BURST:
- * @TX_QUEUE_NUM_MSK:
- *
- * Valid only if frame_count =1
- * TODO: complete documentation
- */
-enum iwl_tx_status {
- TX_STATUS_MSK = 0x000000ff,
- TX_STATUS_SUCCESS = 0x01,
- TX_STATUS_DIRECT_DONE = 0x02,
- /* postpone TX */
- TX_STATUS_POSTPONE_DELAY = 0x40,
- TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
- TX_STATUS_POSTPONE_BT_PRIO = 0x42,
- TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
- TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
- /* abort TX */
- TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
- TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
- TX_STATUS_FAIL_LONG_LIMIT = 0x83,
- TX_STATUS_FAIL_UNDERRUN = 0x84,
- TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
- TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
- TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
- TX_STATUS_FAIL_DEST_PS = 0x88,
- TX_STATUS_FAIL_HOST_ABORTED = 0x89,
- TX_STATUS_FAIL_BT_RETRY = 0x8a,
- TX_STATUS_FAIL_STA_INVALID = 0x8b,
- TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
- TX_STATUS_FAIL_TID_DISABLE = 0x8d,
- TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
- TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
- TX_STATUS_FAIL_FW_DROP = 0x90,
- TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
- TX_STATUS_INTERNAL_ABORT = 0x92,
- TX_MODE_MSK = 0x00000f00,
- TX_MODE_NO_BURST = 0x00000000,
- TX_MODE_IN_BURST_SEQ = 0x00000100,
- TX_MODE_FIRST_IN_BURST = 0x00000200,
- TX_QUEUE_NUM_MSK = 0x0001f000,
- TX_NARROW_BW_MSK = 0x00060000,
- TX_NARROW_BW_1DIV2 = 0x00020000,
- TX_NARROW_BW_1DIV4 = 0x00040000,
- TX_NARROW_BW_1DIV8 = 0x00060000,
-};
-
-/*
- * enum iwl_tx_agg_status - TX aggregation status
- * @AGG_TX_STATE_STATUS_MSK:
- * @AGG_TX_STATE_TRANSMITTED:
- * @AGG_TX_STATE_UNDERRUN:
- * @AGG_TX_STATE_BT_PRIO:
- * @AGG_TX_STATE_FEW_BYTES:
- * @AGG_TX_STATE_ABORT:
- * @AGG_TX_STATE_LAST_SENT_TTL:
- * @AGG_TX_STATE_LAST_SENT_TRY_CNT:
- * @AGG_TX_STATE_LAST_SENT_BT_KILL:
- * @AGG_TX_STATE_SCD_QUERY:
- * @AGG_TX_STATE_TEST_BAD_CRC32:
- * @AGG_TX_STATE_RESPONSE:
- * @AGG_TX_STATE_DUMP_TX:
- * @AGG_TX_STATE_DELAY_TX:
- * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
- * occur if tx failed for this frame when it was a member of a previous
- * aggregation block). If rate scaling is used, retry count indicates the
- * rate table entry used for all frames in the new agg.
- *@ AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
- * this frame
- *
- * TODO: complete documentation
- */
-enum iwl_tx_agg_status {
- AGG_TX_STATE_STATUS_MSK = 0x00fff,
- AGG_TX_STATE_TRANSMITTED = 0x000,
- AGG_TX_STATE_UNDERRUN = 0x001,
- AGG_TX_STATE_BT_PRIO = 0x002,
- AGG_TX_STATE_FEW_BYTES = 0x004,
- AGG_TX_STATE_ABORT = 0x008,
- AGG_TX_STATE_LAST_SENT_TTL = 0x010,
- AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
- AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
- AGG_TX_STATE_SCD_QUERY = 0x080,
- AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
- AGG_TX_STATE_RESPONSE = 0x1ff,
- AGG_TX_STATE_DUMP_TX = 0x200,
- AGG_TX_STATE_DELAY_TX = 0x400,
- AGG_TX_STATE_TRY_CNT_POS = 12,
- AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS,
-};
-
-#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL| \
- AGG_TX_STATE_LAST_SENT_TRY_CNT| \
- AGG_TX_STATE_LAST_SENT_BT_KILL)
-
-/*
- * The mask below describes a status where we are absolutely sure that the MPDU
- * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
- * written the bytes to the TXE, but we know nothing about what the DSP did.
- */
-#define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \
- AGG_TX_STATE_ABORT | \
- AGG_TX_STATE_SCD_QUERY)
-
-/*
- * REPLY_TX = 0x1c (response)
- *
- * This response may be in one of two slightly different formats, indicated
- * by the frame_count field:
- *
- * 1) No aggregation (frame_count == 1). This reports Tx results for a single
- * frame. Multiple attempts, at various bit rates, may have been made for
- * this frame.
- *
- * 2) Aggregation (frame_count > 1). This reports Tx results for two or more
- * frames that used block-acknowledge. All frames were transmitted at
- * same rate. Rate scaling may have been used if first frame in this new
- * agg block failed in previous agg block(s).
- *
- * Note that, for aggregation, ACK (block-ack) status is not delivered
- * here; block-ack has not been received by the time the device records
- * this status.
- * This status relates to reasons the tx might have been blocked or aborted
- * within the device, rather than whether it was received successfully by
- * the destination station.
- */
-
-/**
- * struct agg_tx_status - per packet TX aggregation status
- * @status: enum iwl_tx_agg_status
- * @sequence: Sequence # for this frame's Tx cmd (not SSN!)
- */
-struct agg_tx_status {
- __le16 status;
- __le16 sequence;
-} __packed;
-
-/*
- * definitions for initial rate index field
- * bits [3:0] initial rate index
- * bits [6:4] rate table color, used for the initial rate
- * bit-7 invalid rate indication
- */
-#define TX_RES_INIT_RATE_INDEX_MSK 0x0f
-#define TX_RES_RATE_TABLE_COLOR_MSK 0x70
-#define TX_RES_INV_RATE_INDEX_MSK 0x80
-
-#define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
-#define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
-
-/**
- * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet
- * ( REPLY_TX = 0x1c )
- * @frame_count: 1 no aggregation, >1 aggregation
- * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
- * @failure_rts: num of failures due to unsuccessful RTS
- * @failure_frame: num failures due to no ACK (unused for agg)
- * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
- * Tx of all the batch. RATE_MCS_*
- * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
- * for agg: RTS + CTS + aggregation tx time + block-ack time.
- * in usec.
- * @pa_status: tx power info
- * @pa_integ_res_a: tx power info
- * @pa_integ_res_b: tx power info
- * @pa_integ_res_c: tx power info
- * @measurement_req_id: tx power info
- * @tfd_info: TFD information set by the FH
- * @seq_ctl: sequence control from the Tx cmd
- * @byte_cnt: byte count from the Tx cmd
- * @tlc_info: TLC rate info
- * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
- * @frame_ctrl: frame control
- * @status: for non-agg: frame status TX_STATUS_*
- * for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
- * follow this one, up to frame_count.
- *
- * After the array of statuses comes the SSN of the SCD. Look at
- * %iwl_mvm_get_scd_ssn for more details.
- */
-struct iwl_mvm_tx_resp {
- u8 frame_count;
- u8 bt_kill_count;
- u8 failure_rts;
- u8 failure_frame;
- __le32 initial_rate;
- __le16 wireless_media_time;
-
- u8 pa_status;
- u8 pa_integ_res_a[3];
- u8 pa_integ_res_b[3];
- u8 pa_integ_res_c[3];
- __le16 measurement_req_id;
- u8 reduced_tpc;
- u8 reserved;
-
- __le32 tfd_info;
- __le16 seq_ctl;
- __le16 byte_cnt;
- u8 tlc_info;
- u8 ra_tid;
- __le16 frame_ctrl;
-
- struct agg_tx_status status;
-} __packed; /* TX_RSP_API_S_VER_3 */
-
-/**
- * struct iwl_mvm_ba_notif - notifies about reception of BA
- * ( BA_NOTIF = 0xc5 )
- * @sta_addr_lo32: lower 32 bits of the MAC address
- * @sta_addr_hi16: upper 16 bits of the MAC address
- * @sta_id: Index of recipient (BA-sending) station in fw's station table
- * @tid: tid of the session
- * @seq_ctl:
- * @bitmap: the bitmap of the BA notification as seen in the air
- * @scd_flow: the tx queue this BA relates to
- * @scd_ssn: the index of the last contiguously sent packet
- * @txed: number of Txed frames in this batch
- * @txed_2_done: number of Acked frames in this batch
- */
-struct iwl_mvm_ba_notif {
- __le32 sta_addr_lo32;
- __le16 sta_addr_hi16;
- __le16 reserved;
-
- u8 sta_id;
- u8 tid;
- __le16 seq_ctl;
- __le64 bitmap;
- __le16 scd_flow;
- __le16 scd_ssn;
- u8 txed;
- u8 txed_2_done;
- __le16 reserved1;
-} __packed;
-
-/*
- * struct iwl_mac_beacon_cmd - beacon template command
- * @tx: the tx commands associated with the beacon frame
- * @template_id: currently equal to the mac context id of the coresponding
- * mac.
- * @tim_idx: the offset of the tim IE in the beacon
- * @tim_size: the length of the tim IE
- * @frame: the template of the beacon frame
- */
-struct iwl_mac_beacon_cmd {
- struct iwl_tx_cmd tx;
- __le32 template_id;
- __le32 tim_idx;
- __le32 tim_size;
- struct ieee80211_hdr frame[0];
-} __packed;
-
-struct iwl_beacon_notif {
- struct iwl_mvm_tx_resp beacon_notify_hdr;
- __le64 tsf;
- __le32 ibss_mgr_status;
-} __packed;
-
-/**
- * struct iwl_extended_beacon_notif - notifies about beacon transmission
- * @beacon_notify_hdr: tx response command associated with the beacon
- * @tsf: last beacon tsf
- * @ibss_mgr_status: whether IBSS is manager
- * @gp2: last beacon time in gp2
- */
-struct iwl_extended_beacon_notif {
- struct iwl_mvm_tx_resp beacon_notify_hdr;
- __le64 tsf;
- __le32 ibss_mgr_status;
- __le32 gp2;
-} __packed; /* BEACON_NTFY_API_S_VER_5 */
-
-/**
- * enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
- * and the TFD queues are empty.
- */
-enum iwl_dump_control {
- DUMP_TX_FIFO_FLUSH = BIT(1),
-};
-
-/**
- * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
- * @queues_ctl: bitmap of queues to flush
- * @flush_ctl: control flags
- * @reserved: reserved
- */
-struct iwl_tx_path_flush_cmd {
- __le32 queues_ctl;
- __le16 flush_ctl;
- __le16 reserved;
-} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */
-
-/**
- * iwl_mvm_get_scd_ssn - returns the SSN of the SCD
- * @tx_resp: the Tx response from the fw (agg or non-agg)
- *
- * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since
- * it can't know that everything will go well until the end of the AMPDU, it
- * can't know in advance the number of MPDUs that will be sent in the current
- * batch. This is why it writes the agg Tx response while it fetches the MPDUs.
- * Hence, it can't know in advance what the SSN of the SCD will be at the end
- * of the batch. This is why the SSN of the SCD is written at the end of the
- * whole struct at a variable offset. This function knows how to cope with the
- * variable offset and returns the SSN of the SCD.
- */
-static inline u32 iwl_mvm_get_scd_ssn(struct iwl_mvm_tx_resp *tx_resp)
-{
- return le32_to_cpup((__le32 *)&tx_resp->status +
- tx_resp->frame_count) & 0xfff;
-}
-
-/**
- * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
- * @token:
- * @sta_id: station id
- * @tid:
- * @scd_queue: scheduler queue to confiug
- * @enable: 1 queue enable, 0 queue disable
- * @aggregate: 1 aggregated queue, 0 otherwise
- * @tx_fifo: %enum iwl_mvm_tx_fifo
- * @window: BA window size
- * @ssn: SSN for the BA agreement
- */
-struct iwl_scd_txq_cfg_cmd {
- u8 token;
- u8 sta_id;
- u8 tid;
- u8 scd_queue;
- u8 enable;
- u8 aggregate;
- u8 tx_fifo;
- u8 window;
- __le16 ssn;
- __le16 reserved;
-} __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */
-
-/**
- * struct iwl_scd_txq_cfg_rsp
- * @token: taken from the command
- * @sta_id: station id from the command
- * @tid: tid from the command
- * @scd_queue: scd_queue from the command
- */
-struct iwl_scd_txq_cfg_rsp {
- u8 token;
- u8 sta_id;
- u8 tid;
- u8 scd_queue;
-} __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */
-
-#endif /* __fw_api_tx_h__ */
projects / cascardo / linux.git / blobdiff