*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
- * Copyright (C) 2002 - 2008 Paul Mundt
+ * Copyright (C) 2002 - 2011 Paul Mundt
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
*
* based off of the old drivers/char/sh-sci.c by:
struct timer_list break_timer;
int break_flag;
+ /* SCSCR initialization */
+ unsigned int scscr;
+
+ /* SCBRR calculation algo */
+ unsigned int scbrr_algo_id;
+
/* Interface clock */
struct clk *iclk;
/* Function clock */
struct clk *fclk;
struct list_head node;
+
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
+
#ifdef CONFIG_SERIAL_SH_SCI_DMA
struct device *dma_dev;
unsigned int slave_tx;
if (!(status & SCxSR_TDxE(port))) {
ctrl = sci_in(port, SCSCR);
if (uart_circ_empty(xmit))
- ctrl &= ~SCI_CTRL_FLAGS_TIE;
+ ctrl &= ~SCSCR_TIE;
else
- ctrl |= SCI_CTRL_FLAGS_TIE;
+ ctrl |= SCSCR_TIE;
sci_out(port, SCSCR, ctrl);
return;
}
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
}
- ctrl |= SCI_CTRL_FLAGS_TIE;
+ ctrl |= SCSCR_TIE;
sci_out(port, SCSCR, ctrl);
}
}
disable_irq_nosync(irq);
scr |= 0x4000;
} else {
- scr &= ~SCI_CTRL_FLAGS_RIE;
+ scr &= ~SCSCR_RIE;
}
sci_out(port, SCSCR, scr);
/* Clear current interrupt */
return IRQ_HANDLED;
}
+static inline unsigned long port_rx_irq_mask(struct uart_port *port)
+{
+ /*
+ * Not all ports (such as SCIFA) will support REIE. Rather than
+ * special-casing the port type, we check the port initialization
+ * IRQ enable mask to see whether the IRQ is desired at all. If
+ * it's unset, it's logically inferred that there's no point in
+ * testing for it.
+ */
+ return SCSCR_RIE | (to_sci_port(port)->scscr & SCSR_REIE);
+}
+
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled;
ssr_status = sci_in(port, SCxSR);
scr_status = sci_in(port, SCSCR);
- err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
+ err_enabled = scr_status & port_rx_irq_mask(port);
/* Tx Interrupt */
- if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) &&
+ if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
!s->chan_tx)
ret = sci_tx_interrupt(irq, ptr);
+
/*
* Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
* DR flags
*/
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
- (scr_status & SCI_CTRL_FLAGS_RIE))
+ (scr_status & SCSCR_RIE))
ret = sci_rx_interrupt(irq, ptr);
+
/* Error Interrupt */
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
ret = sci_er_interrupt(irq, ptr);
+
/* Break Interrupt */
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
schedule_work(&s->work_tx);
} else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 ctrl = sci_in(port, SCSCR);
- sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
+ sci_out(port, SCSCR, ctrl & ~SCSCR_TIE);
}
spin_unlock_irqrestore(&port->lock, flags);
if (new != scr)
sci_out(port, SCSCR, new);
}
+
if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
s->cookie_tx < 0)
schedule_work(&s->work_tx);
#endif
+
if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
+ sci_out(port, SCSCR, ctrl | SCSCR_TIE);
}
}
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
+
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x8000;
- ctrl &= ~SCI_CTRL_FLAGS_TIE;
+
+ ctrl &= ~SCSCR_TIE;
+
sci_out(port, SCSCR, ctrl);
}
static void sci_start_rx(struct uart_port *port)
{
- unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
+ unsigned short ctrl;
+
+ ctrl = sci_in(port, SCSCR) | port_rx_irq_mask(port);
- /* Set RIE (Receive Interrupt Enable) bit in SCSCR */
- ctrl |= sci_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
+
sci_out(port, SCSCR, ctrl);
}
{
unsigned short ctrl;
- /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
+
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
- ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
+
+ ctrl &= ~port_rx_irq_mask(port);
+
sci_out(port, SCSCR, ctrl);
}
scr &= ~0x4000;
enable_irq(s->irqs[1]);
}
- sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE);
+ sci_out(port, SCSCR, scr | SCSCR_RIE);
dev_dbg(port->dev, "DMA Rx timed out\n");
schedule_work(&s->work_rx);
}
s->disable(port);
}
+static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
+ unsigned long freq)
+{
+ switch (algo_id) {
+ case SCBRR_ALGO_1:
+ return ((freq + 16 * bps) / (16 * bps) - 1);
+ case SCBRR_ALGO_2:
+ return ((freq + 16 * bps) / (32 * bps) - 1);
+ case SCBRR_ALGO_3:
+ return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
+ case SCBRR_ALGO_4:
+ return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
+ case SCBRR_ALGO_5:
+ return (((freq * 1000 / 32) / bps) - 1);
+ }
+
+ /* Warn, but use a safe default */
+ WARN_ON(1);
+ return ((freq + 16 * bps) / (32 * bps) - 1);
+}
+
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
struct sci_port *s = to_sci_port(port);
-#endif
unsigned int status, baud, smr_val, max_baud;
int t = -1;
u16 scfcr = 0;
baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
if (likely(baud && port->uartclk))
- t = SCBRR_VALUE(baud, port->uartclk);
+ t = sci_scbrr_calc(s->scbrr_algo_id, baud, port->uartclk);
do {
status = sci_in(port, SCxSR);
sci_init_pins(port, termios->c_cflag);
sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0));
- sci_out(port, SCSCR, SCSCR_INIT(port));
+ sci_out(port, SCSCR, s->scscr);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
/*
port->mapbase = p->mapbase;
port->membase = p->membase;
- port->irq = p->irqs[SCIx_TXI_IRQ];
- port->flags = p->flags;
- sci_port->type = port->type = p->type;
+ port->irq = p->irqs[SCIx_TXI_IRQ];
+ port->flags = p->flags;
+ sci_port->type = port->type = p->type;
+ sci_port->scscr = p->scscr;
+ sci_port->scbrr_algo_id = p->scbrr_algo_id;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
sci_port->dma_dev = p->dma_dev;
projects / cascardo / linux.git / blobdiff