Merge tag 'iio-for-4.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio...

[cascardo/linux.git] / drivers / staging / iio / impedance-analyzer / ad5933.c

diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index 65947d3..9f43976 100644 (file)
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -12,20 +12,16 @@
 #include <linux/sysfs.h>
 #include <linux/i2c.h>
 #include <linux/regulator/consumer.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/module.h>
-#include <asm/div64.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/kfifo_buf.h>
 
-#include "ad5933.h"
-
 /* AD5933/AD5934 Registers */
 #define AD5933_REG_CONTROL_HB          0x80    /* R/W, 2 bytes */
 #define AD5933_REG_CONTROL_LB          0x81    /* R/W, 2 bytes */
@@ -86,6 +82,18 @@
 #define AD5933_POLL_TIME_ms            10
 #define AD5933_INIT_EXCITATION_TIME_ms 100
 
+/**
+ * struct ad5933_platform_data - platform specific data
+ * @ext_clk_Hz:                the external clock frequency in Hz, if not set
+ *                     the driver uses the internal clock (16.776 MHz)
+ * @vref_mv:           the external reference voltage in millivolt
+ */
+
+struct ad5933_platform_data {
+       unsigned long                   ext_clk_Hz;
+       unsigned short                  vref_mv;
+};
+
 struct ad5933_state {
        struct i2c_client               *client;
        struct regulator                *reg;
@@ -307,10 +315,10 @@ static ssize_t ad5933_show_frequency(struct device *dev,
 
        freqreg = be32_to_cpu(dat.d32) & 0xFFFFFF;
 
-       freqreg = (u64) freqreg * (u64) (st->mclk_hz / 4);
+       freqreg = (u64)freqreg * (u64)(st->mclk_hz / 4);
        do_div(freqreg, 1 << 27);
 
-       return sprintf(buf, "%d\n", (int) freqreg);
+       return sprintf(buf, "%d\n", (int)freqreg);
 }
 
 static ssize_t ad5933_store_frequency(struct device *dev,
@@ -358,7 +366,7 @@ static ssize_t ad5933_show(struct device *dev,
        int ret = 0, len = 0;
 
        mutex_lock(&indio_dev->mlock);
-       switch ((u32) this_attr->address) {
+       switch ((u32)this_attr->address) {
        case AD5933_OUT_RANGE:
                len = sprintf(buf, "%u\n",
                              st->range_avail[(st->ctrl_hb >> 1) & 0x3]);
@@ -409,7 +417,7 @@ static ssize_t ad5933_store(struct device *dev,
        }
 
        mutex_lock(&indio_dev->mlock);
-       switch ((u32) this_attr->address) {
+       switch ((u32)this_attr->address) {
        case AD5933_OUT_RANGE:
                for (i = 0; i < 4; i++)
                        if (val == st->range_avail[i]) {
@@ -683,8 +691,9 @@ static void ad5933_work(struct work_struct *work)
        }
 
        if (status & AD5933_STAT_SWEEP_DONE) {
-               /* last sample received - power down do nothing until
-                * the ring enable is toggled */
+               /* last sample received - power down do
+                * nothing until the ring enable is toggled
+                */
                ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
        } else {
                /* we just received a valid datum, move on to the next */
@@ -699,7 +708,7 @@ static int ad5933_probe(struct i2c_client *client,
                                   const struct i2c_device_id *id)
 {
        int ret, voltage_uv = 0;
-       struct ad5933_platform_data *pdata = client->dev.platform_data;
+       struct ad5933_platform_data *pdata = dev_get_platdata(&client->dev);
        struct ad5933_state *st;
        struct iio_dev *indio_dev;