Merge branch 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen

[cascardo/linux.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1b332d1..e9f193e 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,8 +5,13 @@
 menu "Graphics support"
        depends on HAS_IOMEM
 
+config HAVE_FB_ATMEL
+       bool
+
 source "drivers/char/agp/Kconfig"
 
+source "drivers/gpu/vga/Kconfig"
+
 source "drivers/gpu/drm/Kconfig"
 
 config VGASTATE
@@ -935,7 +940,7 @@ config FB_S1D13XXX
 
 config FB_ATMEL
        tristate "AT91/AT32 LCD Controller support"
-       depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+       depends on FB && HAVE_FB_ATMEL
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
@@ -951,7 +956,7 @@ config FB_INTSRAM
 
 config FB_ATMEL_STN
        bool "Use a STN display with AT91/AT32 LCD Controller"
-       depends on FB_ATMEL && MACH_AT91SAM9261EK
+       depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
        default n
        help
          Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
@@ -1273,26 +1278,6 @@ config FB_MATROX_MAVEN
          painting procedures (the secondary head does not use acceleration
          engine).
 
-config FB_MATROX_MULTIHEAD
-       bool "Multihead support"
-       depends on FB_MATROX
-       ---help---
-         Say Y here if you have more than one (supported) Matrox device in
-         your computer and you want to use all of them for different monitors
-         ("multihead"). If you have only one device, you should say N because
-         the driver compiled with Y is larger and a bit slower, especially on
-         ia32 (ix86).
-
-         If you said M to "Matrox unified accelerated driver" and N here, you
-         will still be able to use several Matrox devices simultaneously:
-         insert several instances of the module matroxfb into the kernel
-         with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
-         for the different Matrox devices. This method is slightly faster but
-         uses 40 KB of kernel memory per Matrox card.
-
-         There is no need for enabling 'Matrox multihead support' if you have
-         only one Matrox card in the box.
-
 config FB_RADEON
        tristate "ATI Radeon display support"
        depends on FB && PCI
@@ -1867,7 +1852,7 @@ config FB_W100
 
 config FB_SH_MOBILE_LCDC
        tristate "SuperH Mobile LCDC framebuffer support"
-       depends on FB && SUPERH
+       depends on FB && SUPERH && HAVE_CLK
        select FB_SYS_FILLRECT
        select FB_SYS_COPYAREA
        select FB_SYS_IMAGEBLIT
@@ -2039,6 +2024,17 @@ config FB_SH7760
          and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
          panels <= 320 pixel horizontal resolution.
 
+config FB_DA8XX
+       tristate "DA8xx/OMAP-L1xx Framebuffer support"
+       depends on FB && ARCH_DAVINCI_DA8XX
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       ---help---
+         This is the frame buffer device driver for the TI LCD controller
+         found on DA8xx/OMAP-L1xx SoCs.
+         If unsure, say N.
+
 config FB_VIRTUAL
        tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
        depends on FB
@@ -2116,13 +2112,32 @@ config FB_MB862XX_LIME
        ---help---
          Framebuffer support for Fujitsu Lime GDC on host CPU bus.
 
+config FB_EP93XX
+       tristate "EP93XX frame buffer support"
+       depends on FB && ARCH_EP93XX
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       ---help---
+         Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+         This driver is also available as a module. The module will be called
+         ep93xx-fb.
+
 config FB_PRE_INIT_FB
        bool "Don't reinitialize, use bootloader's GDC/Display configuration"
-       depends on FB_MB862XX_LIME
+       depends on FB && FB_MB862XX_LIME
        ---help---
          Select this option if display contents should be inherited as set by
          the bootloader.
 
+config FB_MSM
+       tristate
+       depends on FB && ARCH_MSM
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       default y
+
 config FB_MX3
        tristate "MX3 Framebuffer support"
        depends on FB && MX3_IPU