*
* @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
* @SURVEY_INFO_IN_USE: channel is currently being used
- * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
- * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
+ * @SURVEY_INFO_TIME: active time (in ms) was filled in
+ * @SURVEY_INFO_TIME_BUSY: busy time was filled in
+ * @SURVEY_INFO_TIME_EXT_BUSY: extension channel busy time was filled in
+ * @SURVEY_INFO_TIME_RX: receive time was filled in
+ * @SURVEY_INFO_TIME_TX: transmit time was filled in
+ * @SURVEY_INFO_TIME_SCAN: scan time was filled in
*
* Used by the driver to indicate which info in &struct survey_info
* it has filled in during the get_survey().
*/
enum survey_info_flags {
- SURVEY_INFO_NOISE_DBM = 1<<0,
- SURVEY_INFO_IN_USE = 1<<1,
- SURVEY_INFO_CHANNEL_TIME = 1<<2,
- SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
- SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
- SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
- SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
+ SURVEY_INFO_NOISE_DBM = BIT(0),
+ SURVEY_INFO_IN_USE = BIT(1),
+ SURVEY_INFO_TIME = BIT(2),
+ SURVEY_INFO_TIME_BUSY = BIT(3),
+ SURVEY_INFO_TIME_EXT_BUSY = BIT(4),
+ SURVEY_INFO_TIME_RX = BIT(5),
+ SURVEY_INFO_TIME_TX = BIT(6),
+ SURVEY_INFO_TIME_SCAN = BIT(7),
};
/**
* struct survey_info - channel survey response
*
- * @channel: the channel this survey record reports, mandatory
+ * @channel: the channel this survey record reports, may be %NULL for a single
+ * record to report global statistics
* @filled: bitflag of flags from &enum survey_info_flags
* @noise: channel noise in dBm. This and all following fields are
* optional
- * @channel_time: amount of time in ms the radio spent on the channel
- * @channel_time_busy: amount of time the primary channel was sensed busy
- * @channel_time_ext_busy: amount of time the extension channel was sensed busy
- * @channel_time_rx: amount of time the radio spent receiving data
- * @channel_time_tx: amount of time the radio spent transmitting data
+ * @time: amount of time in ms the radio was turn on (on the channel)
+ * @time_busy: amount of time the primary channel was sensed busy
+ * @time_ext_busy: amount of time the extension channel was sensed busy
+ * @time_rx: amount of time the radio spent receiving data
+ * @time_tx: amount of time the radio spent transmitting data
+ * @time_scan: amount of time the radio spent for scanning
*
* Used by dump_survey() to report back per-channel survey information.
*
*/
struct survey_info {
struct ieee80211_channel *channel;
- u64 channel_time;
- u64 channel_time_busy;
- u64 channel_time_ext_busy;
- u64 channel_time_rx;
- u64 channel_time_tx;
+ u64 time;
+ u64 time_busy;
+ u64 time_ext_busy;
+ u64 time_rx;
+ u64 time_tx;
+ u64 time_scan;
u32 filled;
s8 noise;
};
struct station_parameters *params,
enum cfg80211_station_type statype);
-/**
- * enum station_info_flags - station information flags
- *
- * Used by the driver to indicate which info in &struct station_info
- * it has filled in during get_station() or dump_station().
- *
- * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
- * @STATION_INFO_RX_BYTES: @rx_bytes filled
- * @STATION_INFO_TX_BYTES: @tx_bytes filled
- * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value
- * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value
- * @STATION_INFO_LLID: @llid filled
- * @STATION_INFO_PLID: @plid filled
- * @STATION_INFO_PLINK_STATE: @plink_state filled
- * @STATION_INFO_SIGNAL: @signal filled
- * @STATION_INFO_TX_BITRATE: @txrate fields are filled
- * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
- * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value
- * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value
- * @STATION_INFO_TX_RETRIES: @tx_retries filled
- * @STATION_INFO_TX_FAILED: @tx_failed filled
- * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
- * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
- * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
- * @STATION_INFO_BSS_PARAM: @bss_param filled
- * @STATION_INFO_CONNECTED_TIME: @connected_time filled
- * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
- * @STATION_INFO_STA_FLAGS: @sta_flags filled
- * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
- * @STATION_INFO_T_OFFSET: @t_offset filled
- * @STATION_INFO_LOCAL_PM: @local_pm filled
- * @STATION_INFO_PEER_PM: @peer_pm filled
- * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
- * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
- * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
- * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled
- */
-enum station_info_flags {
- STATION_INFO_INACTIVE_TIME = BIT(0),
- STATION_INFO_RX_BYTES = BIT(1),
- STATION_INFO_TX_BYTES = BIT(2),
- STATION_INFO_LLID = BIT(3),
- STATION_INFO_PLID = BIT(4),
- STATION_INFO_PLINK_STATE = BIT(5),
- STATION_INFO_SIGNAL = BIT(6),
- STATION_INFO_TX_BITRATE = BIT(7),
- STATION_INFO_RX_PACKETS = BIT(8),
- STATION_INFO_TX_PACKETS = BIT(9),
- STATION_INFO_TX_RETRIES = BIT(10),
- STATION_INFO_TX_FAILED = BIT(11),
- STATION_INFO_RX_DROP_MISC = BIT(12),
- STATION_INFO_SIGNAL_AVG = BIT(13),
- STATION_INFO_RX_BITRATE = BIT(14),
- STATION_INFO_BSS_PARAM = BIT(15),
- STATION_INFO_CONNECTED_TIME = BIT(16),
- STATION_INFO_ASSOC_REQ_IES = BIT(17),
- STATION_INFO_STA_FLAGS = BIT(18),
- STATION_INFO_BEACON_LOSS_COUNT = BIT(19),
- STATION_INFO_T_OFFSET = BIT(20),
- STATION_INFO_LOCAL_PM = BIT(21),
- STATION_INFO_PEER_PM = BIT(22),
- STATION_INFO_NONPEER_PM = BIT(23),
- STATION_INFO_RX_BYTES64 = BIT(24),
- STATION_INFO_TX_BYTES64 = BIT(25),
- STATION_INFO_CHAIN_SIGNAL = BIT(26),
- STATION_INFO_CHAIN_SIGNAL_AVG = BIT(27),
- STATION_INFO_EXPECTED_THROUGHPUT = BIT(28),
-};
-
/**
* enum station_info_rate_flags - bitrate info flags
*
*
* @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS
* @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS
- * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission
- * @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission
- * @RATE_INFO_FLAGS_80P80_MHZ_WIDTH: 80+80 MHz width transmission
- * @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission
* @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
* @RATE_INFO_FLAGS_60G: 60GHz MCS
*/
enum rate_info_flags {
RATE_INFO_FLAGS_MCS = BIT(0),
RATE_INFO_FLAGS_VHT_MCS = BIT(1),
- RATE_INFO_FLAGS_40_MHZ_WIDTH = BIT(2),
- RATE_INFO_FLAGS_80_MHZ_WIDTH = BIT(3),
- RATE_INFO_FLAGS_80P80_MHZ_WIDTH = BIT(4),
- RATE_INFO_FLAGS_160_MHZ_WIDTH = BIT(5),
- RATE_INFO_FLAGS_SHORT_GI = BIT(6),
- RATE_INFO_FLAGS_60G = BIT(7),
+ RATE_INFO_FLAGS_SHORT_GI = BIT(2),
+ RATE_INFO_FLAGS_60G = BIT(3),
+};
+
+/**
+ * enum rate_info_bw - rate bandwidth information
+ *
+ * Used by the driver to indicate the rate bandwidth.
+ *
+ * @RATE_INFO_BW_5: 5 MHz bandwidth
+ * @RATE_INFO_BW_10: 10 MHz bandwidth
+ * @RATE_INFO_BW_20: 20 MHz bandwidth
+ * @RATE_INFO_BW_40: 40 MHz bandwidth
+ * @RATE_INFO_BW_80: 80 MHz bandwidth
+ * @RATE_INFO_BW_160: 160 MHz bandwidth
+ */
+enum rate_info_bw {
+ RATE_INFO_BW_5,
+ RATE_INFO_BW_10,
+ RATE_INFO_BW_20,
+ RATE_INFO_BW_40,
+ RATE_INFO_BW_80,
+ RATE_INFO_BW_160,
};
/**
* @mcs: mcs index if struct describes a 802.11n bitrate
* @legacy: bitrate in 100kbit/s for 802.11abg
* @nss: number of streams (VHT only)
+ * @bw: bandwidth (from &enum rate_info_bw)
*/
struct rate_info {
u8 flags;
u8 mcs;
u16 legacy;
u8 nss;
+ u8 bw;
};
/**
u16 beacon_interval;
};
+/**
+ * struct cfg80211_tid_stats - per-TID statistics
+ * @filled: bitmap of flags using the bits of &enum nl80211_tid_stats to
+ * indicate the relevant values in this struct are filled
+ * @rx_msdu: number of received MSDUs
+ * @tx_msdu: number of (attempted) transmitted MSDUs
+ * @tx_msdu_retries: number of retries (not counting the first) for
+ * transmitted MSDUs
+ * @tx_msdu_failed: number of failed transmitted MSDUs
+ */
+struct cfg80211_tid_stats {
+ u32 filled;
+ u64 rx_msdu;
+ u64 tx_msdu;
+ u64 tx_msdu_retries;
+ u64 tx_msdu_failed;
+};
+
#define IEEE80211_MAX_CHAINS 4
/**
*
* Station information filled by driver for get_station() and dump_station.
*
- * @filled: bitflag of flags from &enum station_info_flags
+ * @filled: bitflag of flags using the bits of &enum nl80211_sta_info to
+ * indicate the relevant values in this struct for them
* @connected_time: time(in secs) since a station is last connected
* @inactive_time: time since last station activity (tx/rx) in milliseconds
- * @rx_bytes: bytes received from this station
- * @tx_bytes: bytes transmitted to this station
+ * @rx_bytes: bytes (size of MPDUs) received from this station
+ * @tx_bytes: bytes (size of MPDUs) transmitted to this station
* @llid: mesh local link id
* @plid: mesh peer link id
* @plink_state: mesh peer link state
* @chain_signal_avg: per-chain signal strength average in dBm
* @txrate: current unicast bitrate from this station
* @rxrate: current unicast bitrate to this station
- * @rx_packets: packets received from this station
- * @tx_packets: packets transmitted to this station
- * @tx_retries: cumulative retry counts
- * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
+ * @rx_packets: packets (MSDUs & MMPDUs) received from this station
+ * @tx_packets: packets (MSDUs & MMPDUs) transmitted to this station
+ * @tx_retries: cumulative retry counts (MPDUs)
+ * @tx_failed: number of failed transmissions (MPDUs) (retries exceeded, no ACK)
* @rx_dropped_misc: Dropped for un-specified reason.
* @bss_param: current BSS parameters
* @generation: generation number for nl80211 dumps.
* @nonpeer_pm: non-peer mesh STA power save mode
* @expected_throughput: expected throughput in kbps (including 802.11 headers)
* towards this station.
+ * @rx_beacon: number of beacons received from this peer
+ * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received
+ * from this peer
+ * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
+ * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
*/
struct station_info {
u32 filled;
u32 expected_throughput;
- /*
- * Note: Add a new enum station_info_flags value for each new field and
- * use it to check which fields are initialized.
- */
+ u64 rx_beacon;
+ u8 rx_beacon_signal_avg;
+ struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
};
/**
* @mac_addr_mask: MAC address mask used with randomisation, bits that
* are 0 in the mask should be randomised, bits that are 1 should
* be taken from the @mac_addr
+ * @rcu_head: RCU callback used to free the struct
+ * @owner_nlportid: netlink portid of owner (if this should is a request
+ * owned by a particular socket)
*/
struct cfg80211_sched_scan_request {
struct cfg80211_ssid *ssids;
struct wiphy *wiphy;
struct net_device *dev;
unsigned long scan_start;
+ struct rcu_head rcu_head;
+ u32 owner_nlportid;
/* keep last */
struct ieee80211_channel *channels[0];
* @regulatory_flags: wiphy regulatory flags, see
* &enum ieee80211_regulatory_flags
* @features: features advertised to nl80211, see &enum nl80211_feature_flags.
+ * @ext_features: extended features advertised to nl80211, see
+ * &enum nl80211_ext_feature_index.
* @bss_priv_size: each BSS struct has private data allocated with it,
* this variable determines its size
* @max_scan_ssids: maximum number of SSIDs the device can scan for in
u16 max_acl_mac_addrs;
u32 flags, regulatory_flags, features;
+ u8 ext_features[DIV_ROUND_UP(NUM_NL80211_EXT_FEATURES, 8)];
u32 ap_sme_capa;
*/
int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+/**
+ * regulatory_set_wiphy_regd - set regdom info for self managed drivers
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @rd: the regulatory domain informatoin to use for this wiphy
+ *
+ * Set the regulatory domain information for self-managed wiphys, only they
+ * may use this function. See %REGULATORY_WIPHY_SELF_MANAGED for more
+ * information.
+ *
+ * Return: 0 on success. -EINVAL, -EPERM
+ */
+int regulatory_set_wiphy_regd(struct wiphy *wiphy,
+ struct ieee80211_regdomain *rd);
+
+/**
+ * regulatory_set_wiphy_regd_sync_rtnl - set regdom for self-managed drivers
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @rd: the regulatory domain information to use for this wiphy
+ *
+ * This functions requires the RTNL to be held and applies the new regdomain
+ * synchronously to this wiphy. For more details see
+ * regulatory_set_wiphy_regd().
+ *
+ * Return: 0 on success. -EINVAL, -EPERM
+ */
+int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy,
+ struct ieee80211_regdomain *rd);
+
/**
* wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
* @wiphy: the wireless device we want to process the regulatory domain on
void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
+/**
+ * cfg80211_del_sta_sinfo - notify userspace about deletion of a station
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information/statistics
+ * @gfp: allocation flags
+ */
+void cfg80211_del_sta_sinfo(struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp);
+
/**
* cfg80211_del_sta - notify userspace about deletion of a station
*
* @mac_addr: the station's address
* @gfp: allocation flags
*/
-void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
+static inline void cfg80211_del_sta(struct net_device *dev,
+ const u8 *mac_addr, gfp_t gfp)
+{
+ cfg80211_del_sta_sinfo(dev, mac_addr, NULL, gfp);
+}
/**
* cfg80211_conn_failed - connection request failed notification
*/
void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy);
+/**
+ * wiphy_ext_feature_set - set the extended feature flag
+ *
+ * @wiphy: the wiphy to modify.
+ * @ftidx: extended feature bit index.
+ *
+ * The extended features are flagged in multiple bytes (see
+ * &struct wiphy.@ext_features)
+ */
+static inline void wiphy_ext_feature_set(struct wiphy *wiphy,
+ enum nl80211_ext_feature_index ftidx)
+{
+ u8 *ft_byte;
+
+ ft_byte = &wiphy->ext_features[ftidx / 8];
+ *ft_byte |= BIT(ftidx % 8);
+}
+
+/**
+ * wiphy_ext_feature_isset - check the extended feature flag
+ *
+ * @wiphy: the wiphy to modify.
+ * @ftidx: extended feature bit index.
+ *
+ * The extended features are flagged in multiple bytes (see
+ * &struct wiphy.@ext_features)
+ */
+static inline bool
+wiphy_ext_feature_isset(struct wiphy *wiphy,
+ enum nl80211_ext_feature_index ftidx)
+{
+ u8 ft_byte;
+
+ ft_byte = wiphy->ext_features[ftidx / 8];
+ return (ft_byte & BIT(ftidx % 8)) != 0;
+}
/* ethtool helper */
void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
projects / cascardo / linux.git / blobdiff