*
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
- * Copyright 2015 Intel Deutschland GmbH
+ * Copyright 2015-2016 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
s8 noise;
};
+#define CFG80211_MAX_WEP_KEYS 4
+
/**
* struct cfg80211_crypto_settings - Crypto settings
* @wpa_versions: indicates which, if any, WPA versions are enabled
* allowed through even on unauthorized ports
* @control_port_no_encrypt: TRUE to prevent encryption of control port
* protocol frames.
+ * @wep_keys: static WEP keys, if not NULL points to an array of
+ * CFG80211_MAX_WEP_KEYS WEP keys
+ * @wep_tx_key: key index (0..3) of the default TX static WEP key
*/
struct cfg80211_crypto_settings {
u32 wpa_versions;
bool control_port;
__be16 control_port_ethertype;
bool control_port_no_encrypt;
+ struct key_params *wep_keys;
+ int wep_tx_key;
};
/**
struct mac_address mac_addrs[];
};
+/*
+ * cfg80211_bitrate_mask - masks for bitrate control
+ */
+struct cfg80211_bitrate_mask {
+ struct {
+ u32 legacy;
+ u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN];
+ u16 vht_mcs[NL80211_VHT_NSS_MAX];
+ enum nl80211_txrate_gi gi;
+ } control[NUM_NL80211_BANDS];
+};
+
/**
* struct cfg80211_ap_settings - AP configuration
*
* MAC address based access control
* @pbss: If set, start as a PCP instead of AP. Relevant for DMG
* networks.
+ * @beacon_rate: bitrate to be used for beacons
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
bool p2p_opp_ps;
const struct cfg80211_acl_data *acl;
bool pbss;
+ struct cfg80211_bitrate_mask beacon_rate;
};
/**
struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
};
+#if IS_ENABLED(CONFIG_CFG80211)
/**
* cfg80211_get_station - retrieve information about a given station
* @dev: the device where the station is supposed to be connected to
*/
int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo);
+#else
+static inline int cfg80211_get_station(struct net_device *dev,
+ const u8 *mac_addr,
+ struct station_info *sinfo)
+{
+ return -ENOENT;
+}
+#endif
/**
* enum monitor_flags - monitor flags
* @beacon_interval: beacon interval to use
* @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
* @basic_rates: basic rates to use when creating the mesh
+ * @beacon_rate: bitrate to be used for beacons
*
* These parameters are fixed when the mesh is created.
*/
u16 beacon_interval;
int mcast_rate[NUM_NL80211_BANDS];
u32 basic_rates;
+ struct cfg80211_bitrate_mask beacon_rate;
};
/**
WIPHY_PARAM_DYN_ACK = 1 << 5,
};
-/*
- * cfg80211_bitrate_mask - masks for bitrate control
- */
-struct cfg80211_bitrate_mask {
- struct {
- u32 legacy;
- u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN];
- u16 vht_mcs[NL80211_VHT_NSS_MAX];
- enum nl80211_txrate_gi gi;
- } control[NUM_NL80211_BANDS];
-};
/**
* struct cfg80211_pmksa - PMK Security Association
*
struct cfg80211_dscp_range up[8];
};
+/**
+ * struct cfg80211_nan_conf - NAN configuration
+ *
+ * This struct defines NAN configuration parameters
+ *
+ * @master_pref: master preference (1 - 255)
+ * @dual: dual band operation mode, see &enum nl80211_nan_dual_band_conf
+ */
+struct cfg80211_nan_conf {
+ u8 master_pref;
+ u8 dual;
+};
+
+/**
+ * enum cfg80211_nan_conf_changes - indicates changed fields in NAN
+ * configuration
+ *
+ * @CFG80211_NAN_CONF_CHANGED_PREF: master preference
+ * @CFG80211_NAN_CONF_CHANGED_DUAL: dual band operation
+ */
+enum cfg80211_nan_conf_changes {
+ CFG80211_NAN_CONF_CHANGED_PREF = BIT(0),
+ CFG80211_NAN_CONF_CHANGED_DUAL = BIT(1),
+};
+
+/**
+ * struct cfg80211_nan_func_filter - a NAN function Rx / Tx filter
+ *
+ * @filter: the content of the filter
+ * @len: the length of the filter
+ */
+struct cfg80211_nan_func_filter {
+ const u8 *filter;
+ u8 len;
+};
+
+/**
+ * struct cfg80211_nan_func - a NAN function
+ *
+ * @type: &enum nl80211_nan_function_type
+ * @service_id: the service ID of the function
+ * @publish_type: &nl80211_nan_publish_type
+ * @close_range: if true, the range should be limited. Threshold is
+ * implementation specific.
+ * @publish_bcast: if true, the solicited publish should be broadcasted
+ * @subscribe_active: if true, the subscribe is active
+ * @followup_id: the instance ID for follow up
+ * @followup_reqid: the requestor instance ID for follow up
+ * @followup_dest: MAC address of the recipient of the follow up
+ * @ttl: time to live counter in DW.
+ * @serv_spec_info: Service Specific Info
+ * @serv_spec_info_len: Service Specific Info length
+ * @srf_include: if true, SRF is inclusive
+ * @srf_bf: Bloom Filter
+ * @srf_bf_len: Bloom Filter length
+ * @srf_bf_idx: Bloom Filter index
+ * @srf_macs: SRF MAC addresses
+ * @srf_num_macs: number of MAC addresses in SRF
+ * @rx_filters: rx filters that are matched with corresponding peer's tx_filter
+ * @tx_filters: filters that should be transmitted in the SDF.
+ * @num_rx_filters: length of &rx_filters.
+ * @num_tx_filters: length of &tx_filters.
+ * @instance_id: driver allocated id of the function.
+ * @cookie: unique NAN function identifier.
+ */
+struct cfg80211_nan_func {
+ enum nl80211_nan_function_type type;
+ u8 service_id[NL80211_NAN_FUNC_SERVICE_ID_LEN];
+ u8 publish_type;
+ bool close_range;
+ bool publish_bcast;
+ bool subscribe_active;
+ u8 followup_id;
+ u8 followup_reqid;
+ struct mac_address followup_dest;
+ u32 ttl;
+ const u8 *serv_spec_info;
+ u8 serv_spec_info_len;
+ bool srf_include;
+ const u8 *srf_bf;
+ u8 srf_bf_len;
+ u8 srf_bf_idx;
+ struct mac_address *srf_macs;
+ int srf_num_macs;
+ struct cfg80211_nan_func_filter *rx_filters;
+ struct cfg80211_nan_func_filter *tx_filters;
+ u8 num_tx_filters;
+ u8 num_rx_filters;
+ u8 instance_id;
+ u64 cookie;
+};
+
/**
* struct cfg80211_ops - backend description for wireless configuration
*
* cases, the result of roaming is indicated with a call to
* cfg80211_roamed() or cfg80211_roamed_bss().
* (invoked with the wireless_dev mutex held)
- * @disconnect: Disconnect from the BSS/ESS.
+ * @disconnect: Disconnect from the BSS/ESS. Once done, call
+ * cfg80211_disconnected().
* (invoked with the wireless_dev mutex held)
*
* @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
* and returning to the base channel for communication with the AP.
* @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both
* peers must be on the base channel when the call completes.
+ * @start_nan: Start the NAN interface.
+ * @stop_nan: Stop the NAN interface.
+ * @add_nan_func: Add a NAN function. Returns negative value on failure.
+ * On success @nan_func ownership is transferred to the driver and
+ * it may access it outside of the scope of this function. The driver
+ * should free the @nan_func when no longer needed by calling
+ * cfg80211_free_nan_func().
+ * On success the driver should assign an instance_id in the
+ * provided @nan_func.
+ * @del_nan_func: Delete a NAN function.
+ * @nan_change_conf: changes NAN configuration. The changed parameters must
+ * be specified in @changes (using &enum cfg80211_nan_conf_changes);
+ * All other parameters must be ignored.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
void (*tdls_cancel_channel_switch)(struct wiphy *wiphy,
struct net_device *dev,
const u8 *addr);
+ int (*start_nan)(struct wiphy *wiphy, struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf);
+ void (*stop_nan)(struct wiphy *wiphy, struct wireless_dev *wdev);
+ int (*add_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev,
+ struct cfg80211_nan_func *nan_func);
+ void (*del_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev,
+ u64 cookie);
+ int (*nan_change_conf)(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf,
+ u32 changes);
};
/*
* @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
* @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in
* beaconing mode (AP, IBSS, Mesh, ...).
+ * @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation
+ * before connection.
*/
enum wiphy_flags {
/* use hole at 0 */
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23),
+ WIPHY_FLAG_HAS_STATIC_WEP = BIT(24),
};
/**
* @bss_select_support: bitmask indicating the BSS selection criteria supported
* by the driver in the .connect() callback. The bit position maps to the
* attribute indices defined in &enum nl80211_bss_select_attr.
+ *
+ * @cookie_counter: unique generic cookie counter, used to identify objects.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
u32 bss_select_support;
+ u64 cookie_counter;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
* beacons, 0 when not valid
* @address: The address for this device, valid only if @netdev is %NULL
* @p2p_started: true if this is a P2P Device that has been started
+ * @nan_started: true if this is a NAN interface that has been started
* @cac_started: true if DFS channel availability check has been started
* @cac_start_time: timestamp (jiffies) when the dfs state was entered.
* @cac_time_ms: CAC time in ms
struct mutex mtx;
- bool use_4addr, p2p_started;
+ bool use_4addr, p2p_started, nan_started;
u8 address[ETH_ALEN] __aligned(sizeof(u16));
unsigned int cfg80211_classify8021d(struct sk_buff *skb,
struct cfg80211_qos_map *qos_map);
+/**
+ * cfg80211_find_ie_match - match information element and byte array in data
+ *
+ * @eid: element ID
+ * @ies: data consisting of IEs
+ * @len: length of data
+ * @match: byte array to match
+ * @match_len: number of bytes in the match array
+ * @match_offset: offset in the IE where the byte array should match.
+ * If match_len is zero, this must also be set to zero.
+ * Otherwise this must be set to 2 or more, because the first
+ * byte is the element id, which is already compared to eid, and
+ * the second byte is the IE length.
+ *
+ * Return: %NULL if the element ID could not be found or if
+ * the element is invalid (claims to be longer than the given
+ * data) or if the byte array doesn't match, or a pointer to the first
+ * byte of the requested element, that is the byte containing the
+ * element ID.
+ *
+ * Note: There are no checks on the element length other than
+ * having to fit into the given data and being large enough for the
+ * byte array to match.
+ */
+const u8 *cfg80211_find_ie_match(u8 eid, const u8 *ies, int len,
+ const u8 *match, int match_len,
+ int match_offset);
+
/**
* cfg80211_find_ie - find information element in data
*
* Note: There are no checks on the element length other than
* having to fit into the given data.
*/
-const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
+static inline const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len)
+{
+ return cfg80211_find_ie_match(eid, ies, len, NULL, 0, 0);
+}
/**
* cfg80211_find_vendor_ie - find vendor specific information element in data
return (ft_byte & BIT(ftidx % 8)) != 0;
}
+/**
+ * cfg80211_free_nan_func - free NAN function
+ * @f: NAN function that should be freed
+ *
+ * Frees all the NAN function and all it's allocated members.
+ */
+void cfg80211_free_nan_func(struct cfg80211_nan_func *f);
+
+/**
+ * struct cfg80211_nan_match_params - NAN match parameters
+ * @type: the type of the function that triggered a match. If it is
+ * %NL80211_NAN_FUNC_SUBSCRIBE it means that we replied to a subscriber.
+ * If it is %NL80211_NAN_FUNC_PUBLISH, it means that we got a discovery
+ * result.
+ * If it is %NL80211_NAN_FUNC_FOLLOW_UP, we received a follow up.
+ * @inst_id: the local instance id
+ * @peer_inst_id: the instance id of the peer's function
+ * @addr: the MAC address of the peer
+ * @info_len: the length of the &info
+ * @info: the Service Specific Info from the peer (if any)
+ * @cookie: unique identifier of the corresponding function
+ */
+struct cfg80211_nan_match_params {
+ enum nl80211_nan_function_type type;
+ u8 inst_id;
+ u8 peer_inst_id;
+ const u8 *addr;
+ u8 info_len;
+ const u8 *info;
+ u64 cookie;
+};
+
+/**
+ * cfg80211_nan_match - report a match for a NAN function.
+ * @wdev: the wireless device reporting the match
+ * @match: match notification parameters
+ * @gfp: allocation flags
+ *
+ * This function reports that the a NAN function had a match. This
+ * can be a subscribe that had a match or a solicited publish that
+ * was sent. It can also be a follow up that was received.
+ */
+void cfg80211_nan_match(struct wireless_dev *wdev,
+ struct cfg80211_nan_match_params *match, gfp_t gfp);
+
+/**
+ * cfg80211_nan_func_terminated - notify about NAN function termination.
+ *
+ * @wdev: the wireless device reporting the match
+ * @inst_id: the local instance id
+ * @reason: termination reason (one of the NL80211_NAN_FUNC_TERM_REASON_*)
+ * @cookie: unique NAN function identifier
+ * @gfp: allocation flags
+ *
+ * This function reports that the a NAN function is terminated.
+ */
+void cfg80211_nan_func_terminated(struct wireless_dev *wdev,
+ u8 inst_id,
+ enum nl80211_nan_func_term_reason reason,
+ u64 cookie, gfp_t gfp);
+
/* ethtool helper */
void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
projects / cascardo / linux.git / blobdiff