X-Git-Url: http://git.cascardo.info/?p=cascardo%2Flinux.git;a=blobdiff_plain;f=Documentation%2Fdevicetree%2Fbindings%2Fdisplay%2Ftilcdc%2Ftilcdc.txt;h=a83abd79c55cbccada48ff1744e9adae5500868e;hp=6efa4c55d11827414109e58275d7fcbb8ef354f1;hb=8a1e377e55f2dca5c689926313beeaa8ac2adb22;hpb=a02b5a155e21b6d324045eca2e30e93f4ff4c51c

diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 6efa4c55d118..a83abd79c55c 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -17,6 +17,18 @@ Optional properties:
    the lcd controller.
  - max-pixelclock: The maximum pixel clock that can be supported
    by the lcd controller in KHz.
+ - blue-and-red-wiring: Recognized values "straight" or "crossed".
+   This property deals with the LCDC revision 2 (found on AM335x)
+   color errata [1].
+    - "straight" indicates normal wiring that supports RGB565,
+      BGR888, and XBGR8888 color formats.
+    - "crossed" indicates wiring that has blue and red wires
+      crossed. This setup supports BGR565, RGB888 and XRGB8888
+      formats.
+    - If the property is not present or its value is not recognized
+      the legacy mode is assumed. This configuration supports RGB565,
+      RGB888 and XRGB8888 formats. However, depending on wiring, the red
+      and blue colors are swapped in either 16 or 24-bit color modes.
 
 Optional nodes:
 
@@ -28,6 +40,14 @@ Optional nodes:
    Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
    tfp410 DVI encoder or lcd panel to lcdc
 
+[1] There is an errata about AM335x color wiring. For 16-bit color mode
+    the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
+    but for 24 bit color modes the wiring of blue and red components is
+    crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
+    for Blue[3-7]. For more details see section 3.1.1 in AM335x
+    Silicon Errata:
+    http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
+
 Example:
 
 	fb: fb@4830e000 {
@@ -37,6 +57,8 @@ Example:
 		interrupts = <36>;
 		ti,hwmods = "lcdc";
 
+		blue-and-red-wiring = "crossed";
+
 		port {
 			lcdc_0: endpoint@0 {
 				remote-endpoint = <&hdmi_0>;