X-Git-Url: http://git.cascardo.info/?p=cascardo%2Flinux.git;a=blobdiff_plain;f=Documentation%2Fdevicetree%2Fbindings%2Fmfd%2Fqcom-rpm.txt;h=485bc59fcc4876a5fe974181edf62c0fed65df2c;hp=b98b291a31ba048fa57531bfa3a7a05b1b2f5262;hb=b2edcdae3d9a29b25f6c161a8711caa74ce49991;hpb=b6d90158c935d4a22e56f41647b479ab5ea449d4

diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index b98b291a31ba..485bc59fcc48 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -13,6 +13,7 @@ frequencies.
 		    "qcom,rpm-msm8660"
 		    "qcom,rpm-msm8960"
 		    "qcom,rpm-ipq8064"
+		    "qcom,rpm-mdm9615"
 
 - reg:
 	Usage: required
@@ -59,6 +60,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8058-regulators"
 		    "qcom,rpm-pm8901-regulators"
 		    "qcom,rpm-pm8921-regulators"
+		    "qcom,rpm-pm8018-regulators"
 
 - vdd_l0_l1_lvs-supply:
 - vdd_l2_l11_l12-supply:
@@ -137,6 +139,15 @@ Regulator nodes are identified by their compatible:
 	Definition: reference to regulator supplying the input pin, as
 		    described in the data sheet
 
+- vin_lvs1-supply:
+- vdd_l7-supply:
+- vdd_l8-supply:
+- vdd_l9_l10_l11_l12-supply:
+	Usage: optional (pm8018 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
 of the pmics below.
@@ -156,6 +167,10 @@ pm8921:
 	l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
 	ncp
 
+pm8018:
+	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+	l12, l14, lvs1
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below: