X-Git-Url: http://git.cascardo.info/?p=cascardo%2Flinux.git;a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fath%2Fath10k%2Fwmi.h;h=7692c14c2d164352d491242517cfdcacd00ed13f;hp=80ab2f0fbe509f86449bfacb9b31a2f21bf3fe66;hb=89b7e766c84020c06f842f390b18d62798dc5d06;hpb=226a339ba8f3c53914e640d250feaf4321cfcd04

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 80ab2f0fbe50..7692c14c2d16 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1715,6 +1715,88 @@ struct wmi_start_scan_cmd {
 	 */
 } __packed;
 
+/* This is the definition from 10.X firmware branch */
+struct wmi_start_scan_cmd_10x {
+	/* Scan ID */
+	__le32 scan_id;
+
+	/* Scan requestor ID */
+	__le32 scan_req_id;
+
+	/* VDEV id(interface) that is requesting scan */
+	__le32 vdev_id;
+
+	/* Scan Priority, input to scan scheduler */
+	__le32 scan_priority;
+
+	/* Scan events subscription */
+	__le32 notify_scan_events;
+
+	/* dwell time in msec on active channels */
+	__le32 dwell_time_active;
+
+	/* dwell time in msec on passive channels */
+	__le32 dwell_time_passive;
+
+	/*
+	 * min time in msec on the BSS channel,only valid if atleast one
+	 * VDEV is active
+	 */
+	__le32 min_rest_time;
+
+	/*
+	 * max rest time in msec on the BSS channel,only valid if at least
+	 * one VDEV is active
+	 */
+	/*
+	 * the scanner will rest on the bss channel at least min_rest_time
+	 * after min_rest_time the scanner will start checking for tx/rx
+	 * activity on all VDEVs. if there is no activity the scanner will
+	 * switch to off channel. if there is activity the scanner will let
+	 * the radio on the bss channel until max_rest_time expires.at
+	 * max_rest_time scanner will switch to off channel irrespective of
+	 * activity. activity is determined by the idle_time parameter.
+	 */
+	__le32 max_rest_time;
+
+	/*
+	 * time before sending next set of probe requests.
+	 * The scanner keeps repeating probe requests transmission with
+	 * period specified by repeat_probe_time.
+	 * The number of probe requests specified depends on the ssid_list
+	 * and bssid_list
+	 */
+	__le32 repeat_probe_time;
+
+	/* time in msec between 2 consequetive probe requests with in a set. */
+	__le32 probe_spacing_time;
+
+	/*
+	 * data inactivity time in msec on bss channel that will be used by
+	 * scanner for measuring the inactivity.
+	 */
+	__le32 idle_time;
+
+	/* maximum time in msec allowed for scan  */
+	__le32 max_scan_time;
+
+	/*
+	 * delay in msec before sending first probe request after switching
+	 * to a channel
+	 */
+	__le32 probe_delay;
+
+	/* Scan control flags */
+	__le32 scan_ctrl_flags;
+
+	/*
+	 * TLV (tag length value )  paramerters follow the scan_cmd structure.
+	 * TLV can contain channel list, bssid list, ssid list and
+	 * ie. the TLV tags are defined above;
+	 */
+} __packed;
+
+
 struct wmi_ssid_arg {
 	int len;
 	const u8 *ssid;