X-Git-Url: http://git.cascardo.info/?p=cascardo%2Flinux.git;a=blobdiff_plain;f=drivers%2Fscsi%2FKconfig;h=b94c217a09ae1060d384ad8148791d9b836b0e80;hp=8cc7b3b0f45018f9df222da427ec8149748ac5b5;hb=cb8a4deaf9b2778653c4391d8ccb24c5ab159f9d;hpb=79ce48df755e6a5231cc1ac515e7988e1d715ce1

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 8cc7b3b0f450..b94c217a09ae 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -201,12 +201,12 @@ config SCSI_ENCLOSURE
 	  certain enclosure conditions to be reported and is not required.
 
 config SCSI_CONSTANTS
-	bool "Verbose SCSI error reporting (kernel size +=12K)"
+	bool "Verbose SCSI error reporting (kernel size +=75K)"
 	depends on SCSI
 	help
 	  The error messages regarding your SCSI hardware will be easier to
 	  understand if you say Y here; it will enlarge your kernel by about
-	  12 KB. If in doubt, say Y.
+	  75 KB. If in doubt, say Y.
 
 config SCSI_LOGGING
 	bool "SCSI logging facility"
@@ -1341,13 +1341,15 @@ config SCSI_DC395x
 	  To compile this driver as a module, choose M here: the
 	  module will be called dc395x.
 
-config SCSI_DC390T
-	tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
+config SCSI_AM53C974
+	tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
 	depends on PCI && SCSI
+	select SCSI_SPI_ATTRS
 	---help---
 	  This driver supports PCI SCSI host adapters based on the Am53C974A
 	  chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
 	  PCscsi/PCnet (Am53/79C974) solutions.
+	  This is a new implementation base on the generic esp_scsi driver.
 
 	  Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
 
@@ -1355,7 +1357,7 @@ config SCSI_DC390T
 	  based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called tmscsim.
+	  module will be called am53c974.
 
 config SCSI_T128
 	tristate "Trantor T128/T128F/T228 SCSI support"
@@ -1451,19 +1453,26 @@ config SCSI_NSP32
 	  To compile this driver as a module, choose M here: the
 	  module will be called nsp32.
 
+config SCSI_WD719X
+	tristate "Western Digital WD7193/7197/7296 support"
+	depends on PCI && SCSI
+	select EEPROM_93CX6
+	---help---
+	  This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
+	  SCSI controllers (based on WD33C296A chip).
+
 config SCSI_DEBUG
-	tristate "SCSI debugging host simulator"
+	tristate "SCSI debugging host and device simulator"
 	depends on SCSI
 	select CRC_T10DIF
 	help
-	  This is a host adapter simulator that can simulate multiple hosts
-	  each with multiple dummy SCSI devices (disks). It defaults to one
-	  host adapter with one dummy SCSI disk. Each dummy disk uses kernel
-	  RAM as storage (i.e. it is a ramdisk). To save space when multiple
-	  dummy disks are simulated, they share the same kernel RAM for 
-	  their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more
-	  information. This driver is primarily of use to those testing the
-	  SCSI and block subsystems. If unsure, say N.
+	  This pseudo driver simulates one or more hosts (SCSI initiators),
+	  each with one or more targets, each with one or more logical units.
+	  Defaults to one of each, creating a small RAM disk device. Many
+	  parameters found in the /sys/bus/pseudo/drivers/scsi_debug
+	  directory can be tweaked at run time.
+	  See <http://sg.danny.cz/sg/sdebug26.html> for more information.
+	  Mainly used for testing and best as a module. If unsure, say N.
 
 config SCSI_MESH
 	tristate "MESH (Power Mac internal SCSI) support"
@@ -1615,7 +1624,7 @@ config ATARI_SCSI_RESET_BOOT
 	  that leave the devices with SCSI operations partway completed.
 
 config MAC_SCSI
-	bool "Macintosh NCR5380 SCSI"
+	tristate "Macintosh NCR5380 SCSI"
 	depends on MAC && SCSI=y
 	select SCSI_SPI_ATTRS
 	help