select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZMA
config MIGHT_HAVE_PCI
bool
config ARC_HAS_COH_CACHES
def_bool n
-config ARC_MCIP
- bool "ARConnect Multicore IP (MCIP) Support "
- depends on ISA_ARCV2
- help
- This IP block enables SMP in ARC-HS38 cores.
- It provides for cross-core interrupts, multi-core debug
- hardware semaphores, shared memory,....
-
config NR_CPUS
int "Maximum number of CPUs (2-4096)"
range 2 4096
endif #SMP
+config ARC_MCIP
+ bool "ARConnect Multicore IP (MCIP) Support "
+ depends on ISA_ARCV2
+ default y if SMP
+ help
+ This IP block enables SMP in ARC-HS38 cores.
+ It provides for cross-core interrupts, multi-core debug
+ hardware semaphores, shared memory,....
+
menuconfig ARC_CACHE
bool "Enable Cache Support"
default y
bool "Paranoia Checks in Low Level TLB Handlers"
default n
-config ARC_DBG_TLB_MISS_COUNT
- bool "Profile TLB Misses"
- default n
- select DEBUG_FS
- help
- Counts number of I and D TLB Misses and exports them via Debugfs
- The counters can be cleared via Debugfs as well
-
endif
config ARC_UBOOT_SUPPORT
cflags-$(atleast_gcc44) += -fsection-anchors
-cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
-cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
-
ifdef CONFIG_ISA_ARCV2
ifndef CONFIG_ARC_HAS_LL64
suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
+suffix-$(CONFIG_KERNEL_LZMA) := lzma
-targets += uImage uImage.bin uImage.gz
-extra-y += vmlinux.bin vmlinux.bin.gz
+targets += uImage
+targets += uImage.bin
+targets += uImage.gz
+targets += uImage.lzma
+extra-y += vmlinux.bin
+extra-y += vmlinux.bin.gz
+extra-y += vmlinux.bin.lzma
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
+
$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
$(call if_changed,uimage,none)
$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,uimage,gzip)
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
+ $(call if_changed,uimage,lzma)
+
$(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@
@echo ' Image $@ is ready'
struct cpuinfo_arc_bpu bpu;
struct bcr_identity core;
struct bcr_isa isa;
+ const char *details, *name;
unsigned int vec_base;
struct cpuinfo_arc_ccm iccm, dccm;
struct {
- unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
+ unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
fpu_sp:1, fpu_dp:1, pad2:6,
debug:1, ap:1, smart:1, rtt:1, pad3:4,
timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
extern void read_decode_cache_bcr(void);
-extern int ioc_exists;
+extern int ioc_enable;
extern unsigned long perip_base, perip_end;
#endif /* !__ASSEMBLY__ */
* the loader. We need to make sure that it is out of the way of the program
* that it will "exec", and that there is sufficient room for the brk.
*/
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+#define ELF_ET_DYN_BASE (2UL * TASK_SIZE / 3)
/*
* When the program starts, a1 contains a pointer to a function to be
#define IDU_M_DISTRI_DEST 0x2
};
+struct mcip_bcr {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad3:8,
+ idu:1, llm:1, num_cores:6,
+ iocoh:1, gfrc:1, dbg:1, pad2:1,
+ msg:1, sem:1, ipi:1, pad:1,
+ ver:8;
+#else
+ unsigned int ver:8,
+ pad:1, ipi:1, sem:1, msg:1,
+ pad2:1, dbg:1, gfrc:1, iocoh:1,
+ num_cores:6, llm:1, idu:1,
+ pad3:8;
+#endif
+};
+
/*
* MCIP programming model
*
struct mod_arch_specific {
void *unw_info;
int unw_sec_idx;
+ const char *secstr;
};
#endif
const char *str;
};
-struct cpuinfo_data {
- struct id_to_str info;
- int up_range;
-};
-
extern int root_mountflags, end_mem;
void setup_processor(void);
#define IS_USED_RUN(v) ((v) ? "" : "(not used) ")
#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg))
#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
+#define IS_AVAIL3(v, v2, s) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
#endif /* __ASMARC_SETUP_H */
int sys_cacheflush(uint32_t, uint32_t uint32_t);
int sys_arc_settls(void *);
int sys_arc_gettls(void);
+int sys_arc_usr_cmpxchg(int *, int, int);
#include <asm-generic/syscalls.h>
#define NR_syscalls __NR_syscalls
+/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
+#define __NR_sysfs (__NR_arch_specific_syscall + 3)
+
/* ARC specific syscall */
#define __NR_cacheflush (__NR_arch_specific_syscall + 0)
#define __NR_arc_settls (__NR_arch_specific_syscall + 1)
#define __NR_arc_gettls (__NR_arch_specific_syscall + 2)
+#define __NR_arc_usr_cmpxchg (__NR_arch_specific_syscall + 4)
__SYSCALL(__NR_cacheflush, sys_cacheflush)
__SYSCALL(__NR_arc_settls, sys_arc_settls)
__SYSCALL(__NR_arc_gettls, sys_arc_gettls)
-
-
-/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
-#define __NR_sysfs (__NR_arch_specific_syscall + 3)
+__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg)
__SYSCALL(__NR_sysfs, sys_sysfs)
#undef __SYSCALL
#include <asm/mcip.h>
#include <asm/setup.h>
-static char smp_cpuinfo_buf[128];
-static int idu_detected;
-
static DEFINE_RAW_SPINLOCK(mcip_lock);
+#ifdef CONFIG_SMP
+
+static char smp_cpuinfo_buf[128];
+
static void mcip_setup_per_cpu(int cpu)
{
smp_ipi_irq_setup(cpu, IPI_IRQ);
static void mcip_probe_n_setup(void)
{
- struct mcip_bcr {
-#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int pad3:8,
- idu:1, llm:1, num_cores:6,
- iocoh:1, gfrc:1, dbg:1, pad2:1,
- msg:1, sem:1, ipi:1, pad:1,
- ver:8;
-#else
- unsigned int ver:8,
- pad:1, ipi:1, sem:1, msg:1,
- pad2:1, dbg:1, gfrc:1, iocoh:1,
- num_cores:6, llm:1, idu:1,
- pad3:8;
-#endif
- } mp;
+ struct mcip_bcr mp;
READ_BCR(ARC_REG_MCIP_BCR, mp);
IS_AVAIL1(mp.gfrc, "GFRC"));
cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
- idu_detected = mp.idu;
if (mp.dbg) {
__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
.ipi_clear = mcip_ipi_clear,
};
+#endif
+
/***************************************************************************
* ARCv2 Interrupt Distribution Unit (IDU)
*
/* Read IDU BCR to confirm nr_irqs */
int nr_irqs = of_irq_count(intc);
int i, irq;
+ struct mcip_bcr mp;
+
+ READ_BCR(ARC_REG_MCIP_BCR, mp);
- if (!idu_detected)
+ if (!mp.idu)
panic("IDU not detected, but DeviceTree using it");
pr_info("MCIP: IDU referenced from Devicetree %d irqs\n", nr_irqs);
char *secstr, struct module *mod)
{
#ifdef CONFIG_ARC_DW2_UNWIND
- int i;
-
mod->arch.unw_sec_idx = 0;
mod->arch.unw_info = NULL;
-
- for (i = 1; i < hdr->e_shnum; i++) {
- if (strcmp(secstr+sechdrs[i].sh_name, ".eh_frame") == 0) {
- mod->arch.unw_sec_idx = i;
- break;
- }
- }
+ mod->arch.secstr = secstr;
#endif
return 0;
}
unsigned int relsec, /* sec index for relo sec */
struct module *module)
{
- int i, n;
+ int i, n, relo_type;
Elf32_Rela *rel_entry = (void *)sechdrs[relsec].sh_addr;
Elf32_Sym *sym_entry, *sym_sec;
- Elf32_Addr relocation;
- Elf32_Addr location;
- Elf32_Addr sec_to_patch;
- int relo_type;
-
- sec_to_patch = sechdrs[sechdrs[relsec].sh_info].sh_addr;
+ Elf32_Addr relocation, location, tgt_addr;
+ unsigned int tgtsec;
+
+ /*
+ * @relsec has relocations e.g. .rela.init.text
+ * @tgtsec is section to patch e.g. .init.text
+ */
+ tgtsec = sechdrs[relsec].sh_info;
+ tgt_addr = sechdrs[tgtsec].sh_addr;
sym_sec = (Elf32_Sym *) sechdrs[symindex].sh_addr;
n = sechdrs[relsec].sh_size / sizeof(*rel_entry);
- pr_debug("\n========== Module Sym reloc ===========================\n");
- pr_debug("Section to fixup %x\n", sec_to_patch);
+ pr_debug("\nSection to fixup %s @%x\n",
+ module->arch.secstr + sechdrs[tgtsec].sh_name, tgt_addr);
pr_debug("=========================================================\n");
- pr_debug("rela->r_off | rela->addend | sym->st_value | ADDR | VALUE\n");
+ pr_debug("r_off\tr_add\tst_value ADDRESS VALUE\n");
pr_debug("=========================================================\n");
/* Loop thru entries in relocation section */
for (i = 0; i < n; i++) {
+ const char *s;
/* This is where to make the change */
- location = sec_to_patch + rel_entry[i].r_offset;
+ location = tgt_addr + rel_entry[i].r_offset;
/* This is the symbol it is referring to. Note that all
undefined symbols have been resolved. */
relocation = sym_entry->st_value + rel_entry[i].r_addend;
- pr_debug("\t%x\t\t%x\t\t%x %x %x [%s]\n",
- rel_entry[i].r_offset, rel_entry[i].r_addend,
- sym_entry->st_value, location, relocation,
- strtab + sym_entry->st_name);
+ if (sym_entry->st_name == 0 && ELF_ST_TYPE (sym_entry->st_info) == STT_SECTION) {
+ s = module->arch.secstr + sechdrs[sym_entry->st_shndx].sh_name;
+ } else {
+ s = strtab + sym_entry->st_name;
+ }
+
+ pr_debug(" %x\t%x\t%x %x %x [%s]\n",
+ rel_entry[i].r_offset, rel_entry[i].r_addend,
+ sym_entry->st_value, location, relocation, s);
/* This assumes modules are built with -mlong-calls
* so any branches/jumps are absolute 32 bit jmps
goto relo_err;
}
+
+ if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0)
+ module->arch.unw_sec_idx = tgtsec;
+
return 0;
relo_err:
return task_thread_info(current)->thr_ptr;
}
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+{
+ int uval;
+ int ret;
+
+ /*
+ * This is only for old cores lacking LLOCK/SCOND, which by defintion
+ * can't possibly be SMP. Thus doesn't need to be SMP safe.
+ * And this also helps reduce the overhead for serializing in
+ * the UP case
+ */
+ WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ preempt_disable();
+
+ ret = __get_user(uval, uaddr);
+ if (ret)
+ goto done;
+
+ if (uval != expected)
+ ret = -EAGAIN;
+ else
+ ret = __put_user(new, uaddr);
+
+done:
+ preempt_enable();
+
+ return ret;
+}
+
void arch_cpu_idle(void)
{
/* sleep, but enable all interrupts before committing */
struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
+static const struct id_to_str arc_cpu_rel[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
+ { 0x34, "R4.10"},
+ { 0x35, "R4.11"},
+#else
+ { 0x51, "R2.0" },
+ { 0x52, "R2.1" },
+ { 0x53, "R3.0" },
+#endif
+ { 0x00, NULL }
+};
+
+static const struct id_to_str arc_cpu_nm[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
+ { 0x20, "ARC 600" },
+ { 0x30, "ARC 770" }, /* 750 identified seperately */
+#else
+ { 0x40, "ARC EM" },
+ { 0x50, "ARC HS38" },
+#endif
+ { 0x00, "Unknown" }
+};
+
static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
{
if (is_isa_arcompact()) {
struct bcr_timer timer;
struct bcr_generic bcr;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+ const struct id_to_str *tbl;
+
FIX_PTR(cpu);
READ_BCR(AUX_IDENTITY, cpu->core);
READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
+ for (tbl = &arc_cpu_rel[0]; tbl->id != 0; tbl++) {
+ if (cpu->core.family == tbl->id) {
+ cpu->details = tbl->str;
+ break;
+ }
+ }
+
+ for (tbl = &arc_cpu_nm[0]; tbl->id != 0; tbl++) {
+ if ((cpu->core.family & 0xF0) == tbl->id)
+ break;
+ }
+ cpu->name = tbl->str;
+
READ_BCR(ARC_REG_TIMERS_BCR, timer);
cpu->extn.timer0 = timer.t0;
cpu->extn.timer1 = timer.t1;
cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0; /* 1,3 */
cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
+ cpu->extn.swape = (cpu->core.family >= 0x34) ? 1 :
+ IS_ENABLED(CONFIG_ARC_HAS_SWAPE);
+
READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
cpu->extn.rtt = bcr.ver ? 1 : 0;
cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt;
-}
-static const struct cpuinfo_data arc_cpu_tbl[] = {
-#ifdef CONFIG_ISA_ARCOMPACT
- { {0x20, "ARC 600" }, 0x2F},
- { {0x30, "ARC 700" }, 0x33},
- { {0x34, "ARC 700 R4.10"}, 0x34},
- { {0x35, "ARC 700 R4.11"}, 0x35},
-#else
- { {0x50, "ARC HS38 R2.0"}, 0x51},
- { {0x52, "ARC HS38 R2.1"}, 0x52},
- { {0x53, "ARC HS38 R3.0"}, 0x53},
-#endif
- { {0x00, NULL } }
-};
+ /* some hacks for lack of feature BCR info in old ARC700 cores */
+ if (is_isa_arcompact()) {
+ if (!cpu->isa.ver) /* ISA BCR absent, use Kconfig info */
+ cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
+ else
+ cpu->isa.atomic = cpu->isa.atomic1;
+ cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+
+ /* there's no direct way to distinguish 750 vs. 770 */
+ if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
+ cpu->name = "ARC750";
+ }
+}
static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
struct bcr_identity *core = &cpu->core;
- const struct cpuinfo_data *tbl;
- char *isa_nm;
- int i, be, atomic;
- int n = 0;
+ int i, n = 0;
FIX_PTR(cpu);
- if (is_isa_arcompact()) {
- isa_nm = "ARCompact";
- be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
-
- atomic = cpu->isa.atomic1;
- if (!cpu->isa.ver) /* ISA BCR absent, use Kconfig info */
- atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
- } else {
- isa_nm = "ARCv2";
- be = cpu->isa.be;
- atomic = cpu->isa.atomic;
- }
-
n += scnprintf(buf + n, len - n,
"\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
core->family, core->cpu_id, core->chip_id);
- for (tbl = &arc_cpu_tbl[0]; tbl->info.id != 0; tbl++) {
- if ((core->family >= tbl->info.id) &&
- (core->family <= tbl->up_range)) {
- n += scnprintf(buf + n, len - n,
- "processor [%d]\t: %s (%s ISA) %s\n",
- cpu_id, tbl->info.str, isa_nm,
- IS_AVAIL1(be, "[Big-Endian]"));
- break;
- }
- }
-
- if (tbl->info.id == 0)
- n += scnprintf(buf + n, len - n, "UNKNOWN ARC Processor\n");
+ n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s\n",
+ cpu_id, cpu->name, cpu->details,
+ is_isa_arcompact() ? "ARCompact" : "ARCv2",
+ IS_AVAIL1(cpu->isa.be, "[Big-Endian]"));
n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
CONFIG_ARC_HAS_RTC));
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
- IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+ IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
IS_AVAIL1(cpu->isa.unalign, "unalign (not used)"));
IS_AVAIL1(cpu->extn.swap, "swap "),
IS_AVAIL1(cpu->extn.minmax, "minmax "),
IS_AVAIL1(cpu->extn.crc, "crc "),
- IS_AVAIL2(1, "swape", CONFIG_ARC_HAS_SWAPE));
+ IS_AVAIL2(cpu->extn.swape, "swape", CONFIG_ARC_HAS_SWAPE));
if (cpu->bpu.ver)
n += scnprintf(buf + n, len - n,
FIX_PTR(cpu);
- n += scnprintf(buf + n, len - n,
- "Vector Table\t: %#x\nPeripherals\t: %#lx:%#lx\n",
- cpu->vec_base, perip_base, perip_end);
+ n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base);
if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
* way to pass it w/o having to kmalloc/free a 2 byte string.
* Encode cpu-id as 0xFFcccc, which is decoded by show routine.
*/
- return *pos < num_possible_cpus() ? cpu_to_ptr(*pos) : NULL;
+ return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
if (!user_mode(regs))
show_stacktrace(current, regs);
}
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/init.h>
-#include <linux/namei.h>
-#include <linux/debugfs.h>
-
-static struct dentry *test_dentry;
-static struct dentry *test_dir;
-static struct dentry *test_u32_dentry;
-
-static u32 clr_on_read = 1;
-
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
-u32 numitlb, numdtlb, num_pte_not_present;
-
-static int fill_display_data(char *kbuf)
-{
- size_t num = 0;
- num += sprintf(kbuf + num, "I-TLB Miss %x\n", numitlb);
- num += sprintf(kbuf + num, "D-TLB Miss %x\n", numdtlb);
- num += sprintf(kbuf + num, "PTE not present %x\n", num_pte_not_present);
-
- if (clr_on_read)
- numitlb = numdtlb = num_pte_not_present = 0;
-
- return num;
-}
-
-static int tlb_stats_open(struct inode *inode, struct file *file)
-{
- file->private_data = (void *)__get_free_page(GFP_KERNEL);
- return 0;
-}
-
-/* called on user read(): display the counters */
-static ssize_t tlb_stats_output(struct file *file, /* file descriptor */
- char __user *user_buf, /* user buffer */
- size_t len, /* length of buffer */
- loff_t *offset) /* offset in the file */
-{
- size_t num;
- char *kbuf = (char *)file->private_data;
-
- /* All of the data can he shoved in one iteration */
- if (*offset != 0)
- return 0;
-
- num = fill_display_data(kbuf);
-
- /* simple_read_from_buffer() is helper for copy to user space
- It copies up to @2 (num) bytes from kernel buffer @4 (kbuf) at offset
- @3 (offset) into the user space address starting at @1 (user_buf).
- @5 (len) is max size of user buffer
- */
- return simple_read_from_buffer(user_buf, num, offset, kbuf, len);
-}
-
-/* called on user write : clears the counters */
-static ssize_t tlb_stats_clear(struct file *file, const char __user *user_buf,
- size_t length, loff_t *offset)
-{
- numitlb = numdtlb = num_pte_not_present = 0;
- return length;
-}
-
-static int tlb_stats_close(struct inode *inode, struct file *file)
-{
- free_page((unsigned long)(file->private_data));
- return 0;
-}
-
-static const struct file_operations tlb_stats_file_ops = {
- .read = tlb_stats_output,
- .write = tlb_stats_clear,
- .open = tlb_stats_open,
- .release = tlb_stats_close
-};
-#endif
-
-static int __init arc_debugfs_init(void)
-{
- test_dir = debugfs_create_dir("arc", NULL);
-
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
- test_dentry = debugfs_create_file("tlb_stats", 0444, test_dir, NULL,
- &tlb_stats_file_ops);
-#endif
-
- test_u32_dentry =
- debugfs_create_u32("clr_on_read", 0444, test_dir, &clr_on_read);
-
- return 0;
-}
-
-module_init(arc_debugfs_init);
-
-static void __exit arc_debugfs_exit(void)
-{
- debugfs_remove(test_u32_dentry);
- debugfs_remove(test_dentry);
- debugfs_remove(test_dir);
-}
-module_exit(arc_debugfs_exit);
-
-#endif
#include <asm/setup.h>
static int l2_line_sz;
-int ioc_exists;
-volatile int slc_enable = 1, ioc_enable = 1;
+static int ioc_exists;
+int slc_enable = 1, ioc_enable = 1;
unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
- if (!is_isa_arcv2())
- return buf;
-
p = &cpuinfo_arc700[c].slc;
if (p->ver)
n += scnprintf(buf + n, len - n,
"SLC\t\t: %uK, %uB Line%s\n",
p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
- if (ioc_exists)
- n += scnprintf(buf + n, len - n, "IOC\t\t:%s\n",
- IS_DISABLED_RUN(ioc_enable));
+ n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
+ perip_base,
+ IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency "));
return buf;
}
}
READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
- if (cbcr.c && ioc_enable)
+ if (cbcr.c)
ioc_exists = 1;
+ else
+ ioc_enable = 0;
/* HS 2.0 didn't have AUX_VOL */
if (cpuinfo_arc700[cpu].core.family > 0x51) {
read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
}
- if (is_isa_arcv2() && ioc_exists) {
+ if (is_isa_arcv2() && ioc_enable) {
/* IO coherency base - 0x8z */
write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
/* IO coherency aperture size - 512Mb: 0x8z-0xAz */
* -For coherent data, Read/Write to buffers terminate early in cache
* (vs. always going to memory - thus are faster)
*/
- if ((is_isa_arcv2() && ioc_exists) ||
+ if ((is_isa_arcv2() && ioc_enable) ||
(attrs & DMA_ATTR_NON_CONSISTENT))
need_coh = 0;
int is_non_coh = 1;
is_non_coh = (attrs & DMA_ATTR_NON_CONSISTENT) ||
- (is_isa_arcv2() && ioc_exists);
+ (is_isa_arcv2() && ioc_enable);
if (PageHighMem(page) || !is_non_coh)
iounmap((void __force __iomem *)vaddr);
char super_pg[64] = "";
if (p_mmu->s_pg_sz_m)
- scnprintf(super_pg, 64, "%dM Super Page%s, ",
+ scnprintf(super_pg, 64, "%dM Super Page %s",
p_mmu->s_pg_sz_m,
IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
n += scnprintf(buf + n, len - n,
- "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d %s%s\n",
+ "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
p_mmu->ver, p_mmu->pg_sz_k, super_pg,
p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
p_mmu->u_dtlb, p_mmu->u_itlb,
- IS_AVAIL2(p_mmu->pae, "PAE40 ", CONFIG_ARC_HAS_PAE40));
+ IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
return buf;
}
2:
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
- and.f 0, r0, _PAGE_PRESENT
- bz 1f
- ld r3, [num_pte_not_present]
- add r3, r3, 1
- st r3, [num_pte_not_present]
-1:
-#endif
-
.endm
;-----------------------------------------------------------------
TLBMISS_FREEUP_REGS
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
- ld r0, [@numitlb]
- add r0, r0, 1
- st r0, [@numitlb]
-#endif
-
;----------------------------------------------------------------
; Get the PTE corresponding to V-addr accessed, r2 is setup with EFA
LOAD_FAULT_PTE
TLBMISS_FREEUP_REGS
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
- ld r0, [@numdtlb]
- add r0, r0, 1
- st r0, [@numdtlb]
-#endif
-
;----------------------------------------------------------------
; Get the PTE corresponding to V-addr accessed
; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE, r2 = EFA
projects / cascardo / linux.git / commitdiff