perf/x86/intel, watchdog: Switch NMI watchdog to ref cycles on x86

The NMI watchdog uses either the fixed cycles or a generic cycles
counter. This causes a lot of conflicts with users of the PMU who want
to run a full group including the cycles fixed counter, for example
the --topdown support recently added to perf stat. The code needs to
fall back to not use groups, which can cause measurement inaccuracy
due to multiplexing errors.

This patch switches the NMI watchdog to use reference cycles
on Intel systems.  This is actually more accurate than cycles,
because cycles can tick faster than the measured CPU Frequency
due to Turbo mode.

The ref cycles always tick at their frequency, or slower when
the system is idling. That means the NMI watchdog can never
expire too early, unlike with cycles.

The reference cycles tick roughly at the frequency of the TSC,
so the same period computation can be used.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1465478079-19993-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index 7788ce6..016f426 100644 (file)
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -18,8 +18,16 @@
 #include <linux/nmi.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/perf_event.h>
 
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
+int hw_nmi_get_event(void)
+{
+       if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+               return PERF_COUNT_HW_REF_CPU_CYCLES;
+       return PERF_COUNT_HW_CPU_CYCLES;
+}
+
 u64 hw_nmi_get_sample_period(int watchdog_thresh)
 {
        return (u64)(cpu_khz) * 1000 * watchdog_thresh;

diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 4630eea..79858af 100644 (file)
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -66,6 +66,7 @@ static inline bool trigger_allbutself_cpu_backtrace(void)
 
 #ifdef CONFIG_LOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(int watchdog_thresh);
+int hw_nmi_get_event(void);
 extern int nmi_watchdog_enabled;
 extern int soft_watchdog_enabled;
 extern int watchdog_user_enabled;

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 9acb29f..8dd30fc 100644 (file)
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -315,6 +315,12 @@ static int is_softlockup(unsigned long touch_ts)
 
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
 
+/* Can be overriden by architecture */
+__weak int hw_nmi_get_event(void)
+{
+       return PERF_COUNT_HW_CPU_CYCLES;
+}
+
 static struct perf_event_attr wd_hw_attr = {
        .type           = PERF_TYPE_HARDWARE,
        .config         = PERF_COUNT_HW_CPU_CYCLES,
@@ -604,6 +610,7 @@ static int watchdog_nmi_enable(unsigned int cpu)
 
        wd_attr = &wd_hw_attr;
        wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh);
+       wd_attr->config = hw_nmi_get_event();
 
        /* Try to register using hardware perf events */
        event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);