ARM: kirkwood: Move the crypto node under the mbus node

There should be no nodes that are not children of the mbus. Move
the crypto node under the mbus.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index d1bbe95..76b1627 100644 (file)
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -35,13 +35,22 @@
                controller = <&mbusc>;
                pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
                pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+               crypto@0301 {
+                       compatible = "marvell,orion-crypto";
+                       reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
+                             <MBUS_ID(0x03, 0x01) 0 0x800>;
+                       reg-names = "regs", "sram";
+                       interrupts = <22>;
+                       clocks = <&gate_clk 17>;
+                       status = "okay";
+               };
        };
 
        ocp@f1000000 {
                compatible = "simple-bus";
                ranges = <0x00000000 0xf1000000 0x0100000
-                         0xf4000000 0xf4000000 0x0000400
-                         0xf5000000 0xf5000000 0x0000400>;
+                         0xf4000000 0xf4000000 0x0000400>;
                #address-cells = <1>;
                #size-cells = <1>;
 
@@ -222,16 +231,6 @@
                        status = "disabled";
                };
 
-               crypto@30000 {
-                       compatible = "marvell,orion-crypto";
-                       reg = <0x30000 0x10000>,
-                             <0xf5000000 0x800>;
-                       reg-names = "regs", "sram";
-                       interrupts = <22>;
-                       clocks = <&gate_clk 17>;
-                       status = "okay";
-               };
-
                mdio: mdio-bus@72004 {
                        compatible = "marvell,orion-mdio";
                        #address-cells = <1>;