power: reset: move hisilicon reboot code

Move reboot code from hisilicon platform driver into reset driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 90fdbb4..9848829 100644 (file)
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -4,6 +4,9 @@ config ARCH_HISI
        select ARM_AMBA
        select ARM_GIC
        select ARM_TIMER_SP804
+       select POWER_RESET
+       select POWER_RESET_HISI
+       select POWER_SUPPLY
 
 if ARCH_HISI
 

diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index 2bfbe3f..7996c6b 100644 (file)
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -14,10 +14,6 @@
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-
-#include <asm/proc-fns.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -51,32 +47,6 @@ static void __init hi3620_map_io(void)
        iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
 }
 
-static void hi3xxx_restart(enum reboot_mode mode, const char *cmd)
-{
-       struct device_node *np;
-       void __iomem *base;
-       int offset;
-
-       np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
-       if (!np) {
-               pr_err("failed to find hisilicon,sysctrl node\n");
-               return;
-       }
-       base = of_iomap(np, 0);
-       if (!base) {
-               pr_err("failed to map address in hisilicon,sysctrl node\n");
-               return;
-       }
-       if (of_property_read_u32(np, "reboot-offset", &offset) < 0) {
-               pr_err("failed to find reboot-offset property\n");
-               return;
-       }
-       writel_relaxed(0xdeadbeef, base + offset);
-
-       while (1)
-               cpu_do_idle();
-}
-
 static const char *hi3xxx_compat[] __initconst = {
        "hisilicon,hi3620-hi4511",
        NULL,
@@ -86,7 +56,6 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
        .map_io         = hi3620_map_io,
        .dt_compat      = hi3xxx_compat,
        .smp            = smp_ops(hi3xxx_smp_ops),
-       .restart        = hi3xxx_restart,
 MACHINE_END
 
 static const char *hix5hd2_compat[] __initconst = {
@@ -96,7 +65,5 @@ static const char *hix5hd2_compat[] __initconst = {
 
 DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
        .dt_compat      = hix5hd2_compat,
-       .init_late      = hi3xxx_init_late,
        .smp            = smp_ops(hix5hd2_smp_ops),
-       .restart        = hi3xxx_restart,
 MACHINE_END

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index bdcf517..4127f49 100644 (file)
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -28,6 +28,12 @@ config POWER_RESET_GPIO
          If your board needs a GPIO high/low to power down, say Y and
          create a binding in your devicetree.
 
+config POWER_RESET_HISI
+       bool "Hisilicon power-off driver"
+       depends on POWER_RESET && ARCH_HISI
+       help
+         Reboot support for Hisilicon boards.
+
 config POWER_RESET_MSM
        bool "Qualcomm MSM power-off driver"
        depends on POWER_RESET && ARCH_QCOM

diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index dde2e8b..fe0f228 100644 (file)
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
 obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
 obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o

diff --git a/drivers/power/reset/hisi-reboot.c b/drivers/power/reset/hisi-reboot.c
new file mode 100644 (file)
index 0000000..0c91d02
--- /dev/null
+++ b/drivers/power/reset/hisi-reboot.c
@@ -0,0 +1,67 @@
+/*
+ * Hisilicon SoC reset code
+ *
+ * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/proc-fns.h>
+#include <asm/system_misc.h>
+
+static void __iomem *base;
+static u32 reboot_offset;
+
+static void hisi_restart(enum reboot_mode mode, const char *cmd)
+{
+       writel_relaxed(0xdeadbeef, base + reboot_offset);
+
+       while (1)
+               cpu_do_idle();
+}
+
+static int hisi_reboot_probe(struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+
+       base = of_iomap(np, 0);
+       if (!base) {
+               WARN(1, "failed to map base address");
+               return -ENODEV;
+       }
+
+       if (of_property_read_u32(np, "reboot-offset", &reboot_offset) < 0) {
+               pr_err("failed to find reboot-offset property\n");
+               return -EINVAL;
+       }
+
+       arm_pm_restart = hisi_restart;
+
+       return 0;
+}
+
+static struct of_device_id hisi_reboot_of_match[] = {
+       { .compatible = "hisilicon,sysctrl" },
+       {}
+};
+
+static struct platform_driver hisi_reboot_driver = {
+       .probe = hisi_reboot_probe,
+       .driver = {
+               .name = "hisi-reboot",
+               .of_match_table = hisi_reboot_of_match,
+       },
+};
+module_platform_driver(hisi_reboot_driver);