Revert "at803x: fix suspend/resume for SGMII link"

This reverts commit 98267311fe3b334ae7c107fa0e2413adcf3ba735.

Suspending the SGMII alongside the copper side
made the at803x inaccessable while powered down,
e.g. it can't be re-probed after suspend.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f279a89..cf74d10 100644 (file)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -52,9 +52,6 @@
 #define AT803X_DEBUG_REG_5                     0x05
 #define AT803X_DEBUG_TX_CLK_DLY_EN             BIT(8)
 
-#define AT803X_REG_CHIP_CONFIG                 0x1f
-#define AT803X_BT_BX_REG_SEL                   0x8000
-
 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
 #define ATH8035_PHY_ID 0x004dd072
@@ -209,7 +206,6 @@ static int at803x_suspend(struct phy_device *phydev)
 {
        int value;
        int wol_enabled;
-       int ccr;
 
        mutex_lock(&phydev->lock);
 
@@ -225,16 +221,6 @@ static int at803x_suspend(struct phy_device *phydev)
 
        phy_write(phydev, MII_BMCR, value);
 
-       if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
-               goto done;
-
-       /* also power-down SGMII interface */
-       ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-       phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
-       phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN);
-       phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
        mutex_unlock(&phydev->lock);
 
        return 0;
@@ -243,7 +229,6 @@ done:
 static int at803x_resume(struct phy_device *phydev)
 {
        int value;
-       int ccr;
 
        mutex_lock(&phydev->lock);
 
@@ -251,17 +236,6 @@ static int at803x_resume(struct phy_device *phydev)
        value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
        phy_write(phydev, MII_BMCR, value);
 
-       if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
-               goto done;
-
-       /* also power-up SGMII interface */
-       ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-       phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
-       value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE);
-       phy_write(phydev, MII_BMCR, value);
-       phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
        mutex_unlock(&phydev->lock);
 
        return 0;