This change is a prerequisite change for TASK_ISOLATION but also
stands on its own for readability and maintainability. The existing
tile do_work_pending() was called in a loop from assembly on
the slow path; this change moves the loop into C code as well.
For the x86 version see commit
c5c46f59e4e7 ("x86/entry: Add new,
comprehensible entry and exit handlers written in C").
This change exposes a pre-existing bug on the older tilepro platform;
the singlestep processing is done last, but on tilepro (unlike tilegx)
we enable interrupts while doing that processing, so we could in
theory miss a signal or other asynchronous event. A future change
could fix this by breaking the singlestep work into a "prepare"
step done in the main loop, and a "trigger" step done after exiting
the loop. Since this change is intended as purely a restructuring
change, we call out the bug explicitly now, but don't yet fix it.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
/* Nothing for now */
}
-extern int do_work_pending(struct pt_regs *regs, u32 flags);
+extern void prepare_exit_to_usermode(struct pt_regs *regs, u32 flags);
/*
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_NOHZ (1<<TIF_NOHZ)
+/* Work to do as we loop to exit to user space. */
+#define _TIF_WORK_MASK \
+ (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+ _TIF_ASYNC_TLB | _TIF_NOTIFY_RESUME)
+
/* Work to do on any return to user space. */
#define _TIF_ALLWORK_MASK \
- (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_SINGLESTEP | \
- _TIF_ASYNC_TLB | _TIF_NOTIFY_RESUME | _TIF_NOHZ)
+ (_TIF_WORK_MASK | _TIF_SINGLESTEP | _TIF_NOHZ)
/* Work to do at syscall entry. */
#define _TIF_SYSCALL_ENTRY_WORK \
.Lresume_userspace:
FEEDBACK_REENTER(interrupt_return)
- /*
- * Use r33 to hold whether we have already loaded the callee-saves
- * into ptregs. We don't want to do it twice in this loop, since
- * then we'd clobber whatever changes are made by ptrace, etc.
- * Get base of stack in r32.
- */
- {
- GET_THREAD_INFO(r32)
- movei r33, 0
- }
-
-.Lretry_work_pending:
/*
* Disable interrupts so as to make sure we don't
* miss an interrupt that sets any of the thread flags (like
IRQ_DISABLE(r20, r21)
TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */
-
- /* Check to see if there is any work to do before returning to user. */
+ /*
+ * See if there are any work items (including single-shot items)
+ * to do. If so, save the callee-save registers to pt_regs
+ * and then dispatch to C code.
+ */
+ GET_THREAD_INFO(r21)
{
- addi r29, r32, THREAD_INFO_FLAGS_OFFSET
- moveli r1, lo16(_TIF_ALLWORK_MASK)
+ addi r22, r21, THREAD_INFO_FLAGS_OFFSET
+ moveli r20, lo16(_TIF_ALLWORK_MASK)
}
{
- lw r29, r29
- auli r1, r1, ha16(_TIF_ALLWORK_MASK)
+ lw r22, r22
+ auli r20, r20, ha16(_TIF_ALLWORK_MASK)
}
- and r1, r29, r1
- bzt r1, .Lrestore_all
-
- /*
- * Make sure we have all the registers saved for signal
- * handling, notify-resume, or single-step. Call out to C
- * code to figure out exactly what we need to do for each flag bit,
- * then if necessary, reload the flags and recheck.
- */
+ and r1, r22, r20
{
PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
- bnz r33, 1f
+ bzt r1, .Lrestore_all
}
push_extra_callee_saves r0
- movei r33, 1
-1: jal do_work_pending
- bnz r0, .Lretry_work_pending
+ jal prepare_exit_to_usermode
/*
* In the NMI case we
FEEDBACK_REENTER(ret_from_kernel_thread)
{
movei r30, 0 /* not an NMI */
- j .Lresume_userspace /* jump into middle of interrupt_return */
+ j interrupt_return
}
STD_ENDPROC(ret_from_kernel_thread)
.Lresume_userspace:
FEEDBACK_REENTER(interrupt_return)
- /*
- * Use r33 to hold whether we have already loaded the callee-saves
- * into ptregs. We don't want to do it twice in this loop, since
- * then we'd clobber whatever changes are made by ptrace, etc.
- */
- {
- movei r33, 0
- move r32, sp
- }
-
- /* Get base of stack in r32. */
- EXTRACT_THREAD_INFO(r32)
-
-.Lretry_work_pending:
/*
* Disable interrupts so as to make sure we don't
* miss an interrupt that sets any of the thread flags (like
IRQ_DISABLE(r20, r21)
TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */
-
- /* Check to see if there is any work to do before returning to user. */
+ /*
+ * See if there are any work items (including single-shot items)
+ * to do. If so, save the callee-save registers to pt_regs
+ * and then dispatch to C code.
+ */
+ move r21, sp
+ EXTRACT_THREAD_INFO(r21)
{
- addi r29, r32, THREAD_INFO_FLAGS_OFFSET
- moveli r1, hw1_last(_TIF_ALLWORK_MASK)
+ addi r22, r21, THREAD_INFO_FLAGS_OFFSET
+ moveli r20, hw1_last(_TIF_ALLWORK_MASK)
}
{
- ld r29, r29
- shl16insli r1, r1, hw0(_TIF_ALLWORK_MASK)
+ ld r22, r22
+ shl16insli r20, r20, hw0(_TIF_ALLWORK_MASK)
}
- and r1, r29, r1
- beqzt r1, .Lrestore_all
-
- /*
- * Make sure we have all the registers saved for signal
- * handling or notify-resume. Call out to C code to figure out
- * exactly what we need to do for each flag bit, then if
- * necessary, reload the flags and recheck.
- */
+ and r1, r22, r20
{
PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
- bnez r33, 1f
+ beqzt r1, .Lrestore_all
}
push_extra_callee_saves r0
- movei r33, 1
-1: jal do_work_pending
- bnez r0, .Lretry_work_pending
+ jal prepare_exit_to_usermode
/*
* In the NMI case we
FEEDBACK_REENTER(ret_from_kernel_thread)
{
movei r30, 0 /* not an NMI */
- j .Lresume_userspace /* jump into middle of interrupt_return */
+ j interrupt_return
}
STD_ENDPROC(ret_from_kernel_thread)
/*
* This routine is called on return from interrupt if any of the
- * TIF_WORK_MASK flags are set in thread_info->flags. It is
- * entered with interrupts disabled so we don't miss an event
- * that modified the thread_info flags. If any flag is set, we
- * handle it and return, and the calling assembly code will
- * re-disable interrupts, reload the thread flags, and call back
- * if more flags need to be handled.
- *
- * We return whether we need to check the thread_info flags again
- * or not. Note that we don't clear TIF_SINGLESTEP here, so it's
- * important that it be tested last, and then claim that we don't
- * need to recheck the flags.
+ * TIF_ALLWORK_MASK flags are set in thread_info->flags. It is
+ * entered with interrupts disabled so we don't miss an event that
+ * modified the thread_info flags. We loop until all the tested flags
+ * are clear. Note that the function is called on certain conditions
+ * that are not listed in the loop condition here (e.g. SINGLESTEP)
+ * which guarantees we will do those things once, and redo them if any
+ * of the other work items is re-done, but won't continue looping if
+ * all the other work is done.
*/
-int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
+void prepare_exit_to_usermode(struct pt_regs *regs, u32 thread_info_flags)
{
- /* If we enter in kernel mode, do nothing and exit the caller loop. */
- if (!user_mode(regs))
- return 0;
+ if (WARN_ON(!user_mode(regs)))
+ return;
- user_exit();
+ do {
+ local_irq_enable();
- /* Enable interrupts; they are disabled again on return to caller. */
- local_irq_enable();
+ if (thread_info_flags & _TIF_NEED_RESCHED)
+ schedule();
- if (thread_info_flags & _TIF_NEED_RESCHED) {
- schedule();
- return 1;
- }
#if CHIP_HAS_TILE_DMA()
- if (thread_info_flags & _TIF_ASYNC_TLB) {
- do_async_page_fault(regs);
- return 1;
- }
+ if (thread_info_flags & _TIF_ASYNC_TLB)
+ do_async_page_fault(regs);
#endif
- if (thread_info_flags & _TIF_SIGPENDING) {
- do_signal(regs);
- return 1;
- }
- if (thread_info_flags & _TIF_NOTIFY_RESUME) {
- clear_thread_flag(TIF_NOTIFY_RESUME);
- tracehook_notify_resume(regs);
- return 1;
- }
- if (thread_info_flags & _TIF_SINGLESTEP)
+
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
+
+ local_irq_disable();
+ thread_info_flags = READ_ONCE(current_thread_info()->flags);
+
+ } while (thread_info_flags & _TIF_WORK_MASK);
+
+ if (thread_info_flags & _TIF_SINGLESTEP) {
single_step_once(regs);
+#ifndef __tilegx__
+ /*
+ * FIXME: on tilepro, since we enable interrupts in
+ * this routine, it's possible that we miss a signal
+ * or other asynchronous event.
+ */
+ local_irq_disable();
+#endif
+ }
user_enter();
-
- return 0;
}
unsigned long get_wchan(struct task_struct *p)
projects / cascardo / linux.git / commitdiff