ARC: boot log: don't assume SWAPE instruction support

This came to light when helping a customer with oldish ARC750 core who
were getting instruction errors because of lack of SWAPE but boot log
was incorrectly printing it as being present

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 819b44c..b8d29b1 100644 (file)
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -353,7 +353,7 @@ struct cpuinfo_arc {
        unsigned int vec_base;
        struct cpuinfo_arc_ccm iccm, dccm;
        struct {
-               unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
+               unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
                             fpu_sp:1, fpu_dp:1, pad2:6,
                             debug:1, ap:1, smart:1, rtt:1, pad3:4,
                             timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;

diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 0170d94..156981a 100644 (file)
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -138,6 +138,9 @@ static void read_arc_build_cfg_regs(void)
        cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0;        /* 1,3 */
        cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
        cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
+       cpu->extn.swape = (cpu->core.family >= 0x34) ? 1 :
+                               IS_ENABLED(CONFIG_ARC_HAS_SWAPE);
+
        READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
 
        /* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
@@ -250,7 +253,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
                       IS_AVAIL1(cpu->extn.swap, "swap "),
                       IS_AVAIL1(cpu->extn.minmax, "minmax "),
                       IS_AVAIL1(cpu->extn.crc, "crc "),
-                      IS_AVAIL2(1, "swape", CONFIG_ARC_HAS_SWAPE));
+                      IS_AVAIL2(cpu->extn.swape, "swape", CONFIG_ARC_HAS_SWAPE));
 
        if (cpu->bpu.ver)
                n += scnprintf(buf + n, len - n,