net: fec: set mac address unconditionally

If the mac address origin is not dt, you can only safely assign a mac
address after "link up" of the device. If the link is off the clocks are
disabled and because of issues assigning registers when clocks are off the
new mac address cannot be written in .ndo_set_mac_address() on some soc's.
This fix sets the mac address unconditionally in fec_restart(...) and
ensures consistency between fec registers and the network layer.

Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address")
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 1fa2d87..48a033e 100644 (file)
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -913,13 +913,11 @@ fec_restart(struct net_device *ndev)
         * enet-mac reset will reset mac address registers too,
         * so need to reconfigure it.
         */
-       if (fep->quirks & FEC_QUIRK_ENET_MAC) {
-               memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN);
-               writel((__force u32)cpu_to_be32(temp_mac[0]),
-                      fep->hwp + FEC_ADDR_LOW);
-               writel((__force u32)cpu_to_be32(temp_mac[1]),
-                      fep->hwp + FEC_ADDR_HIGH);
-       }
+       memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN);
+       writel((__force u32)cpu_to_be32(temp_mac[0]),
+              fep->hwp + FEC_ADDR_LOW);
+       writel((__force u32)cpu_to_be32(temp_mac[1]),
+              fep->hwp + FEC_ADDR_HIGH);
 
        /* Clear any outstanding interrupt. */
        writel(0xffffffff, fep->hwp + FEC_IEVENT);