Kbuild will assume the directories to be in the same relative path as the
Makefile if no absolute path is specified (path does not start with '/').
+To exclude certain files from make clean, use the $(no-clean-files) variable.
+This is only a special case used in the top level Kbuild file:
+
+ Example:
+ #Kbuild
+ no-clean-files := $(bounds-file) $(offsets-file)
+
Usually kbuild descends down in subdirectories due to "obj-* := dir/",
but in the architecture makefiles where the kbuild infrastructure
is not sufficient this sometimes needs to be explicit.
missing-syscalls: scripts/checksyscalls.sh FORCE
$(call cmd,syscalls)
-# Delete all targets during make clean
-clean-files := $(addprefix $(objtree)/,$(filter-out $(bounds-file) $(offsets-file),$(targets)))
+# Keep these two files during make clean
+no-clean-files := $(bounds-file) $(offsets-file)
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
-clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
+clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
PHONY += $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
-clean: archclean $(clean-dirs)
- $(call cmd,rmdirs)
- $(call cmd,rmfiles)
- @find . $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
- -o -name '*.symtypes' -o -name 'modules.order' \
- -o -name modules.builtin -o -name '.tmp_*.o.*' \
- -o -name '*.gcno' \) -type f -print | xargs rm -f
+clean: archclean
# mrproper - Delete all generated files, including .config
#
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
- $(KBUILD_EXTMOD)/modules.order \
- $(KBUILD_EXTMOD)/modules.builtin
-clean: $(clean-dirs)
- $(call cmd,rmdirs)
- $(call cmd,rmfiles)
- @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
- -o -name '*.gcno' \) -type f -print | xargs rm -f
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
help:
@echo ' Building external modules.'
scripts: ;
endif # KBUILD_EXTMOD
+clean: $(clean-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+ -o -name '*.symtypes' -o -name 'modules.order' \
+ -o -name modules.builtin -o -name '.tmp_*.o.*' \
+ -o -name '*.gcno' \) -type f -print | xargs rm -f
+
# Generate tags for editors
# ---------------------------------------------------------------------------
quiet_cmd_tags = GEN $@
. = ALIGN(4); \
VMLINUX_SYMBOL(__initramfs_start) = .; \
*(.init.ramfs) \
- VMLINUX_SYMBOL(__initramfs_end) = .;
+ . = ALIGN(8); \
+ *(.init.ramfs.info)
#else
#define INIT_RAM_FS
#endif
}
__setup("retain_initrd", retain_initrd_param);
-extern char __initramfs_start[], __initramfs_end[];
+extern char __initramfs_start[];
+extern unsigned long __initramfs_size;
#include <linux/initrd.h>
#include <linux/kexec.h>
static int __init populate_rootfs(void)
{
- char *err = unpack_to_rootfs(__initramfs_start,
- __initramfs_end - __initramfs_start);
+ char *err = unpack_to_rootfs(__initramfs_start, __initramfs_size);
if (err)
panic(err); /* Failed to decompress INTERNAL initramfs */
if (initrd_start) {
return 0;
} else {
clean_rootfs();
- unpack_to_rootfs(__initramfs_start,
- __initramfs_end - __initramfs_start);
+ unpack_to_rootfs(__initramfs_start, __initramfs_size);
}
printk(KERN_INFO "rootfs image is not initramfs (%s)"
"; looks like an initrd\n", err);
$(host-progs) \
$(hostprogs-y) $(hostprogs-m) $(hostprogs-)
+__clean-files := $(filter-out $(no-clean-files), $(__clean-files))
+
# as clean-files is given relative to the current directory, this adds
# a $(obj) prefix, except for absolute paths
endif
ifdef CONFIG_SYMBOL_PREFIX
-_cpp_flags += -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX))
+_sym_flags = -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX))
+_cpp_flags += $(_sym_flags)
+_a_flags += $(_sym_flags)
endif
rc = fscanf(in, "%llx %c %499s\n", &s->addr, &stype, str);
if (rc != 3) {
- if (rc != EOF) {
- /* skip line. sym is used as dummy to
- * shut of "warn_unused_result" warning.
- */
- sym = fgets(str, 500, in);
- }
+ if (rc != EOF && fgets(str, 500, in) == NULL)
+ fprintf(stderr, "Read error or end of file.\n");
return -1;
}
* .cpuinit.data => __cpudata
* .memexitconst => __memconst
* etc.
+ *
+ * The memory of returned value has been allocated on a heap. The user of this
+ * method should free it after usage.
*/
static char *sec2annotation(const char *s)
{
strcat(p, "data ");
else
strcat(p, " ");
- return r; /* we leak her but we do not care */
+ return r;
} else {
return strdup("");
}
# full scm version string
res="$res$(scm_version)"
else
- # apped a plus sign if the repository is not in a clean tagged
- # state and LOCALVERSION= is not specified
+ # append a plus sign if the repository is not in a clean
+ # annotated or signed tagged state (as git describe only
+ # looks at signed or annotated tags - git tag -a/-s) and
+ # LOCALVERSION= is not specified
if test "${LOCALVERSION+set}" != "set"; then
scm=$(scm_version --short)
res="$res${scm:++}"
# Lzo
suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZO) = .lzo
+AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/initramfs_data.cpio$(suffix_y)"
+
# Generate builtin.o based on initramfs_data.o
-obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o
+obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o
# initramfs_data.o contains the compressed initramfs_data.cpio image.
# The image is included using .incbin, a dependency which is not
# tracked automatically.
-$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE
+$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE
#####
# Generate the initramfs cpio archive
-T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
ld -m elf_i386 -r -o built-in.o initramfs_data.o
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
+ For including the .init.ramfs sections, see include/asm-generic/vmlinux.lds.
The above example is for i386 - the parameters vary from architectures.
Eventually look up LDFLAGS_BLOB in an older version of the
in the ELF header, as required by certain architectures.
*/
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio"
+#include <linux/stringify.h>
+.section .init.ramfs,"a"
+__irf_start:
+.incbin __stringify(INITRAMFS_IMAGE)
+__irf_end:
+.section .init.ramfs.info,"a"
+.globl __initramfs_size
+__initramfs_size:
+#ifdef CONFIG_32BIT
+ .long __irf_end - __irf_start
+#else
+ .quad __irf_end - __irf_start
+#endif
+++ /dev/null
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.bz2"
+++ /dev/null
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.gz"
+++ /dev/null
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.lzma"
+++ /dev/null
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.lzo"
projects / cascardo / linux.git / commitdiff