From: Joe Perches Date: Tue, 5 May 2015 17:06:03 +0000 (-0700) Subject: arcnet: Move files out of include/linux X-Git-Tag: v4.4-rc1~141^2~291^2~15 X-Git-Url: http://git.cascardo.info/?p=cascardo%2Flinux.git;a=commitdiff_plain;h=26c6d281688e8bb8154fa78c60e551d024f5d0b8 arcnet: Move files out of include/linux These #include files don't need to be in the include/linux directory as they can be local to drivers/net/arcnet/ Move them and update the #include statements. Update the MAINTAINERS file pattern by deleting arcdevice from the NETWORKING block as arcnet is currently unmaintained. Signed-off-by: Joe Perches Signed-off-by: Michael Grzeschik --- diff --git a/MAINTAINERS b/MAINTAINERS index 310da4295c70..c978a257f4aa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7292,7 +7292,6 @@ S: Odd Fixes F: drivers/net/ F: include/linux/if_* F: include/linux/netdevice.h -F: include/linux/arcdevice.h F: include/linux/etherdevice.h F: include/linux/fcdevice.h F: include/linux/fddidevice.h diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c index 59b3083c19f9..35a747a7329e 100644 --- a/drivers/net/arcnet/arc-rawmode.c +++ b/drivers/net/arcnet/arc-rawmode.c @@ -33,7 +33,8 @@ #include #include #include -#include + +#include "arcdevice.h" static void rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length); diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c index 8fa5eb43f308..37406fffc001 100644 --- a/drivers/net/arcnet/arc-rimi.c +++ b/drivers/net/arcnet/arc-rimi.c @@ -37,7 +37,8 @@ #include #include #include -#include + +#include "arcdevice.h" /* Internal function declarations */ diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h new file mode 100644 index 000000000000..9ca135d0f114 --- /dev/null +++ b/drivers/net/arcnet/arcdevice.h @@ -0,0 +1,346 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. NET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions used by the ARCnet driver. + * + * Authors: Avery Pennarun and David Woodhouse + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef _LINUX_ARCDEVICE_H +#define _LINUX_ARCDEVICE_H + +#include +#include + +#ifdef __KERNEL__ +#include + +/* + * RECON_THRESHOLD is the maximum number of RECON messages to receive + * within one minute before printing a "cabling problem" warning. The + * default value should be fine. + * + * After that, a "cabling restored" message will be printed on the next IRQ + * if no RECON messages have been received for 10 seconds. + * + * Do not define RECON_THRESHOLD at all if you want to disable this feature. + */ +#define RECON_THRESHOLD 30 + +/* + * Define this to the minimum "timeout" value. If a transmit takes longer + * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large + * network, or one with heavy network traffic, this timeout may need to be + * increased. The larger it is, though, the longer it will be between + * necessary transmits - don't set this too high. + */ +#define TX_TIMEOUT (HZ * 200 / 1000) + +/* Display warnings about the driver being an ALPHA version. */ +#undef ALPHA_WARNING + +/* + * Debugging bitflags: each option can be enabled individually. + * + * Note: only debug flags included in the ARCNET_DEBUG_MAX define will + * actually be available. GCC will (at least, GCC 2.7.0 will) notice + * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize + * them out. + */ +#define D_NORMAL 1 /* important operational info */ +#define D_EXTRA 2 /* useful, but non-vital information */ +#define D_INIT 4 /* show init/probe messages */ +#define D_INIT_REASONS 8 /* show reasons for discarding probes */ +#define D_RECON 32 /* print a message whenever token is lost */ +#define D_PROTO 64 /* debug auto-protocol support */ +/* debug levels below give LOTS of output during normal operation! */ +#define D_DURING 128 /* trace operations (including irq's) */ +#define D_TX 256 /* show tx packets */ +#define D_RX 512 /* show rx packets */ +#define D_SKB 1024 /* show skb's */ +#define D_SKB_SIZE 2048 /* show skb sizes */ +#define D_TIMING 4096 /* show time needed to copy buffers to card */ +#define D_DEBUG 8192 /* Very detailed debug line for line */ + +#ifndef ARCNET_DEBUG_MAX +#define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */ +#endif + +#ifndef ARCNET_DEBUG +#define ARCNET_DEBUG (D_NORMAL | D_EXTRA) +#endif +extern int arcnet_debug; + +#define BUGLVL(x) ((x) & ARCNET_DEBUG_MAX & arcnet_debug) + +/* macros to simplify debug checking */ +#define arc_printk(x, dev, fmt, ...) \ +do { \ + if (BUGLVL(x)) { \ + if ((x) == D_NORMAL) \ + netdev_warn(dev, fmt, ##__VA_ARGS__); \ + else if ((x) < D_DURING) \ + netdev_info(dev, fmt, ##__VA_ARGS__); \ + else \ + netdev_dbg(dev, fmt, ##__VA_ARGS__); \ + } \ +} while (0) + +#define arc_cont(x, fmt, ...) \ +do { \ + if (BUGLVL(x)) \ + pr_cont(fmt, ##__VA_ARGS__); \ +} while (0) + +/* see how long a function call takes to run, expressed in CPU cycles */ +#define TIME(dev, name, bytes, call) \ +do { \ + if (BUGLVL(D_TIMING)) { \ + unsigned long _x, _y; \ + _x = get_cycles(); \ + call; \ + _y = get_cycles(); \ + arc_printk(D_TIMING, dev, \ + "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \ + name, bytes, _y - _x, \ + 100000000 / 1024 * bytes / (_y - _x + 1)); \ + } else { \ + call; \ + } \ +} while (0) + +/* + * Time needed to reset the card - in ms (milliseconds). This works on my + * SMC PC100. I can't find a reference that tells me just how long I + * should wait. + */ +#define RESETtime (300) + +/* + * These are the max/min lengths of packet payload, not including the + * arc_hardware header, but definitely including the soft header. + * + * Note: packet sizes 254, 255, 256 are impossible because of the way + * ARCnet registers work That's why RFC1201 defines "exception" packets. + * In non-RFC1201 protocols, we have to just tack some extra bytes on the + * end. + */ +#define MTU 253 /* normal packet max size */ +#define MinTU 257 /* extended packet min size */ +#define XMTU 508 /* extended packet max size */ + +/* status/interrupt mask bit fields */ +#define TXFREEflag 0x01 /* transmitter available */ +#define TXACKflag 0x02 /* transmitted msg. ackd */ +#define RECONflag 0x04 /* network reconfigured */ +#define TESTflag 0x08 /* test flag */ +#define EXCNAKflag 0x08 /* excesive nak flag */ +#define RESETflag 0x10 /* power-on-reset */ +#define RES1flag 0x20 /* reserved - usually set by jumper */ +#define RES2flag 0x40 /* reserved - usually set by jumper */ +#define NORXflag 0x80 /* receiver inhibited */ + +/* Flags used for IO-mapped memory operations */ +#define AUTOINCflag 0x40 /* Increase location with each access */ +#define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */ +#define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */ + +/* in the command register, the following bits have these meanings: + * 0-2 command + * 3-4 page number (for enable rcv/xmt command) + * 7 receive broadcasts + */ +#define NOTXcmd 0x01 /* disable transmitter */ +#define NORXcmd 0x02 /* disable receiver */ +#define TXcmd 0x03 /* enable transmitter */ +#define RXcmd 0x04 /* enable receiver */ +#define CONFIGcmd 0x05 /* define configuration */ +#define CFLAGScmd 0x06 /* clear flags */ +#define TESTcmd 0x07 /* load test flags */ + +/* flags for "clear flags" command */ +#define RESETclear 0x08 /* power-on-reset */ +#define CONFIGclear 0x10 /* system reconfigured */ + +#define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */ + +/* flags for "load test flags" command */ +#define TESTload 0x08 /* test flag (diagnostic) */ + +/* byte deposited into first address of buffers on reset */ +#define TESTvalue 0321 /* that's octal for 0xD1 :) */ + +/* for "enable receiver" command */ +#define RXbcasts 0x80 /* receive broadcasts */ + +/* flags for "define configuration" command */ +#define NORMALconf 0x00 /* 1-249 byte packets */ +#define EXTconf 0x08 /* 250-504 byte packets */ + +/* card feature flags, set during auto-detection. + * (currently only used by com20020pci) + */ +#define ARC_IS_5MBIT 1 /* card default speed is 5MBit */ +#define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit, + but default is 2.5MBit. */ + +/* information needed to define an encapsulation driver */ +struct ArcProto { + char suffix; /* a for RFC1201, e for ether-encap, etc. */ + int mtu; /* largest possible packet */ + int is_ip; /* This is a ip plugin - not a raw thing */ + + void (*rx)(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length); + int (*build_header)(struct sk_buff *skb, struct net_device *dev, + unsigned short ethproto, uint8_t daddr); + + /* these functions return '1' if the skb can now be freed */ + int (*prepare_tx)(struct net_device *dev, struct archdr *pkt, + int length, int bufnum); + int (*continue_tx)(struct net_device *dev, int bufnum); + int (*ack_tx)(struct net_device *dev, int acked); +}; + +extern struct ArcProto *arc_proto_map[256], *arc_proto_default, + *arc_bcast_proto, *arc_raw_proto; + +/* + * "Incoming" is information needed for each address that could be sending + * to us. Mostly for partially-received split packets. + */ +struct Incoming { + struct sk_buff *skb; /* packet data buffer */ + __be16 sequence; /* sequence number of assembly */ + uint8_t lastpacket, /* number of last packet (from 1) */ + numpackets; /* number of packets in split */ +}; + +/* only needed for RFC1201 */ +struct Outgoing { + struct ArcProto *proto; /* protocol driver that owns this: + * if NULL, no packet is pending. + */ + struct sk_buff *skb; /* buffer from upper levels */ + struct archdr *pkt; /* a pointer into the skb */ + uint16_t length, /* bytes total */ + dataleft, /* bytes left */ + segnum, /* segment being sent */ + numsegs; /* number of segments */ +}; + +struct arcnet_local { + uint8_t config, /* current value of CONFIG register */ + timeout, /* Extended timeout for COM20020 */ + backplane, /* Backplane flag for COM20020 */ + clockp, /* COM20020 clock divider */ + clockm, /* COM20020 clock multiplier flag */ + setup, /* Contents of setup1 register */ + setup2, /* Contents of setup2 register */ + intmask; /* current value of INTMASK register */ + uint8_t default_proto[256]; /* default encap to use for each host */ + int cur_tx, /* buffer used by current transmit, or -1 */ + next_tx, /* buffer where a packet is ready to send */ + cur_rx; /* current receive buffer */ + int lastload_dest, /* can last loaded packet be acked? */ + lasttrans_dest; /* can last TX'd packet be acked? */ + int timed_out; /* need to process TX timeout and drop packet */ + unsigned long last_timeout; /* time of last reported timeout */ + char *card_name; /* card ident string */ + int card_flags; /* special card features */ + + /* On preemtive and SMB a lock is needed */ + spinlock_t lock; + + /* + * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of + * which can be used for either sending or receiving. The new dynamic + * buffer management routines use a simple circular queue of available + * buffers, and take them as they're needed. This way, we simplify + * situations in which we (for example) want to pre-load a transmit + * buffer, or start receiving while we copy a received packet to + * memory. + * + * The rules: only the interrupt handler is allowed to _add_ buffers to + * the queue; thus, this doesn't require a lock. Both the interrupt + * handler and the transmit function will want to _remove_ buffers, so + * we need to handle the situation where they try to do it at the same + * time. + * + * If next_buf == first_free_buf, the queue is empty. Since there are + * only four possible buffers, the queue should never be full. + */ + atomic_t buf_lock; + int buf_queue[5]; + int next_buf, first_free_buf; + + /* network "reconfiguration" handling */ + unsigned long first_recon; /* time of "first" RECON message to count */ + unsigned long last_recon; /* time of most recent RECON */ + int num_recons; /* number of RECONs between first and last. */ + int network_down; /* do we think the network is down? */ + + int excnak_pending; /* We just got an excesive nak interrupt */ + + struct { + uint16_t sequence; /* sequence number (incs with each packet) */ + __be16 aborted_seq; + + struct Incoming incoming[256]; /* one from each address */ + } rfc1201; + + /* really only used by rfc1201, but we'll pretend it's not */ + struct Outgoing outgoing; /* packet currently being sent */ + + /* hardware-specific functions */ + struct { + struct module *owner; + void (*command)(struct net_device *dev, int cmd); + int (*status)(struct net_device *dev); + void (*intmask)(struct net_device *dev, int mask); + int (*reset)(struct net_device *dev, int really_reset); + void (*open)(struct net_device *dev); + void (*close)(struct net_device *dev); + + void (*copy_to_card)(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + void (*copy_from_card)(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + } hw; + + void __iomem *mem_start; /* pointer to ioremap'ed MMIO */ +}; + +#define ARCRESET(x) (lp->hw.reset(dev, (x))) +#define ACOMMAND(x) (lp->hw.command(dev, (x))) +#define ASTATUS() (lp->hw.status(dev)) +#define AINTMASK(x) (lp->hw.intmask(dev, (x))) + +#if ARCNET_DEBUG_MAX & D_SKB +void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc); +#else +static inline +void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) +{ +} +#endif + +void arcnet_unregister_proto(struct ArcProto *proto); +irqreturn_t arcnet_interrupt(int irq, void *dev_id); +struct net_device *alloc_arcdev(const char *name); + +int arcnet_open(struct net_device *dev); +int arcnet_close(struct net_device *dev); +netdev_tx_t arcnet_send_packet(struct sk_buff *skb, + struct net_device *dev); +void arcnet_timeout(struct net_device *dev); + +#endif /* __KERNEL__ */ +#endif /* _LINUX_ARCDEVICE_H */ diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 00074e781353..c8423ee24e71 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -50,9 +50,10 @@ #include #include #include -#include #include +#include "arcdevice.h" + /* "do nothing" functions for protocol drivers */ static void null_rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length); diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c index 46a76dcc21aa..2f2d0d94a80d 100644 --- a/drivers/net/arcnet/capmode.c +++ b/drivers/net/arcnet/capmode.c @@ -35,7 +35,8 @@ #include #include #include -#include + +#include "arcdevice.h" /* packet receiver */ static void rx(struct net_device *dev, int bufnum, diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c index 352500b8d875..ab5202b506a6 100644 --- a/drivers/net/arcnet/com20020-isa.c +++ b/drivers/net/arcnet/com20020-isa.c @@ -39,11 +39,11 @@ #include #include #include -#include -#include - #include +#include "arcdevice.h" +#include "com20020.h" + /* We cannot (yet) probe for an IO mapped card, although we can check that * it's where we were told it was, and even do autoirq. */ diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index a28887dfcc9e..1a75a6982031 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -39,12 +39,12 @@ #include #include #include -#include -#include #include - #include +#include "arcdevice.h" +#include "com20020.h" + /* Module parameters */ static int node; diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index 00f910cf7b81..f46e22093c54 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -37,11 +37,11 @@ #include #include #include -#include -#include - #include +#include "arcdevice.h" +#include "com20020.h" + static char *clockrates[] = { "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", diff --git a/drivers/net/arcnet/com20020.h b/drivers/net/arcnet/com20020.h new file mode 100644 index 000000000000..85898995b234 --- /dev/null +++ b/drivers/net/arcnet/com20020.h @@ -0,0 +1,145 @@ +/* + * Linux ARCnet driver - COM20020 chipset support - function declarations + * + * Written 1997 by David Woodhouse. + * Written 1994-1999 by Avery Pennarun. + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ +#ifndef __COM20020_H +#define __COM20020_H + +int com20020_check(struct net_device *dev); +int com20020_found(struct net_device *dev, int shared); +extern const struct net_device_ops com20020_netdev_ops; + +/* The number of low I/O ports used by the card. */ +#define ARCNET_TOTAL_SIZE 8 + +/* various register addresses */ +#ifdef CONFIG_SA1100_CT6001 +#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ +#else +#define BUS_ALIGN 1 +#endif + +#define PLX_PCI_MAX_CARDS 2 + +struct com20020_pci_channel_map { + u32 bar; + u32 offset; + u32 size; /* 0x00 - auto, e.g. length of entire bar */ +}; + +struct com20020_pci_card_info { + const char *name; + int devcount; + + struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS]; + + unsigned int flags; +}; + +struct com20020_priv { + struct com20020_pci_card_info *ci; + struct list_head list_dev; +}; + +struct com20020_dev { + struct list_head list; + struct net_device *dev; + + struct com20020_priv *pci_priv; + int index; +}; + +#define _INTMASK (ioaddr+BUS_ALIGN*0) /* writable */ +#define _STATUS (ioaddr+BUS_ALIGN*0) /* readable */ +#define _COMMAND (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */ +#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */ +#define _ADDR_HI (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */ +#define _ADDR_LO (ioaddr+BUS_ALIGN*3) +#define _MEMDATA (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */ +#define _SUBADR (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */ +#define _CONFIG (ioaddr+BUS_ALIGN*6) /* configuration register */ +#define _XREG (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG + or _SUBADR) */ + +/* in the ADDR_HI register */ +#define RDDATAflag 0x80 /* next access is a read (not a write) */ + +/* in the DIAGSTAT register */ +#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */ + +/* in the CONFIG register */ +#define RESETcfg 0x80 /* put card in reset state */ +#define TXENcfg 0x20 /* enable TX */ + +/* in SETUP register */ +#define PROMISCset 0x10 /* enable RCV_ALL */ +#define P1MODE 0x80 /* enable P1-MODE for Backplane */ +#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */ + +/* COM2002x */ +#define SUB_TENTATIVE 0 /* tentative node ID */ +#define SUB_NODE 1 /* node ID */ +#define SUB_SETUP1 2 /* various options */ +#define SUB_TEST 3 /* test/diag register */ + +/* COM20022 only */ +#define SUB_SETUP2 4 /* sundry options */ +#define SUB_BUSCTL 5 /* bus control options */ +#define SUB_DMACOUNT 6 /* DMA count options */ + +#define SET_SUBADR(x) do { \ + if ((x) < 4) \ + { \ + lp->config = (lp->config & ~0x03) | (x); \ + SETCONF; \ + } \ + else \ + { \ + outb(x, _SUBADR); \ + } \ +} while (0) + +#undef ARCRESET +#undef ASTATUS +#undef ACOMMAND +#undef AINTMASK + +#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \ + udelay(5); \ + outb(lp->config , _CONFIG); \ + } +#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG); \ + udelay(5); \ + outb(0x18 , _CONFIG); \ + } + +#define ASTATUS() inb(_STATUS) +#define ADIAGSTATUS() inb(_DIAGSTAT) +#define ACOMMAND(cmd) outb((cmd),_COMMAND) +#define AINTMASK(msk) outb((msk),_INTMASK) + +#define SETCONF outb(lp->config, _CONFIG) + +#endif /* __COM20020_H */ diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c index 854169489b68..5fdde6946427 100644 --- a/drivers/net/arcnet/com20020_cs.c +++ b/drivers/net/arcnet/com20020_cs.c @@ -42,13 +42,12 @@ #include #include #include -#include -#include - +#include #include #include -#include +#include "arcdevice.h" +#include "com20020.h" static void regdump(struct net_device *dev) { diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c index 9e779a53035d..ce15d1911048 100644 --- a/drivers/net/arcnet/com90io.c +++ b/drivers/net/arcnet/com90io.c @@ -38,7 +38,8 @@ #include #include #include -#include + +#include "arcdevice.h" /* Internal function declarations */ diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c index 62100acfb6a7..b672795acaa7 100644 --- a/drivers/net/arcnet/com90xx.c +++ b/drivers/net/arcnet/com90xx.c @@ -36,7 +36,8 @@ #include #include #include -#include + +#include "arcdevice.h" /* Define this to speed up the autoprobe by assuming if only one io port and * shmem are left in the list at Stage 5, they must correspond to each diff --git a/drivers/net/arcnet/rfc1051.c b/drivers/net/arcnet/rfc1051.c index 691bee5bcd42..4b1a75469cb1 100644 --- a/drivers/net/arcnet/rfc1051.c +++ b/drivers/net/arcnet/rfc1051.c @@ -33,7 +33,8 @@ #include #include #include -#include + +#include "arcdevice.h" static __be16 type_trans(struct sk_buff *skb, struct net_device *dev); static void rx(struct net_device *dev, int bufnum, diff --git a/drivers/net/arcnet/rfc1201.c b/drivers/net/arcnet/rfc1201.c index aaa1966593aa..566da5ecdc9d 100644 --- a/drivers/net/arcnet/rfc1201.c +++ b/drivers/net/arcnet/rfc1201.c @@ -32,7 +32,8 @@ #include #include #include -#include + +#include "arcdevice.h" MODULE_LICENSE("GPL"); diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h deleted file mode 100644 index 9ca135d0f114..000000000000 --- a/include/linux/arcdevice.h +++ /dev/null @@ -1,346 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. NET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Definitions used by the ARCnet driver. - * - * Authors: Avery Pennarun and David Woodhouse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef _LINUX_ARCDEVICE_H -#define _LINUX_ARCDEVICE_H - -#include -#include - -#ifdef __KERNEL__ -#include - -/* - * RECON_THRESHOLD is the maximum number of RECON messages to receive - * within one minute before printing a "cabling problem" warning. The - * default value should be fine. - * - * After that, a "cabling restored" message will be printed on the next IRQ - * if no RECON messages have been received for 10 seconds. - * - * Do not define RECON_THRESHOLD at all if you want to disable this feature. - */ -#define RECON_THRESHOLD 30 - -/* - * Define this to the minimum "timeout" value. If a transmit takes longer - * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large - * network, or one with heavy network traffic, this timeout may need to be - * increased. The larger it is, though, the longer it will be between - * necessary transmits - don't set this too high. - */ -#define TX_TIMEOUT (HZ * 200 / 1000) - -/* Display warnings about the driver being an ALPHA version. */ -#undef ALPHA_WARNING - -/* - * Debugging bitflags: each option can be enabled individually. - * - * Note: only debug flags included in the ARCNET_DEBUG_MAX define will - * actually be available. GCC will (at least, GCC 2.7.0 will) notice - * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize - * them out. - */ -#define D_NORMAL 1 /* important operational info */ -#define D_EXTRA 2 /* useful, but non-vital information */ -#define D_INIT 4 /* show init/probe messages */ -#define D_INIT_REASONS 8 /* show reasons for discarding probes */ -#define D_RECON 32 /* print a message whenever token is lost */ -#define D_PROTO 64 /* debug auto-protocol support */ -/* debug levels below give LOTS of output during normal operation! */ -#define D_DURING 128 /* trace operations (including irq's) */ -#define D_TX 256 /* show tx packets */ -#define D_RX 512 /* show rx packets */ -#define D_SKB 1024 /* show skb's */ -#define D_SKB_SIZE 2048 /* show skb sizes */ -#define D_TIMING 4096 /* show time needed to copy buffers to card */ -#define D_DEBUG 8192 /* Very detailed debug line for line */ - -#ifndef ARCNET_DEBUG_MAX -#define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */ -#endif - -#ifndef ARCNET_DEBUG -#define ARCNET_DEBUG (D_NORMAL | D_EXTRA) -#endif -extern int arcnet_debug; - -#define BUGLVL(x) ((x) & ARCNET_DEBUG_MAX & arcnet_debug) - -/* macros to simplify debug checking */ -#define arc_printk(x, dev, fmt, ...) \ -do { \ - if (BUGLVL(x)) { \ - if ((x) == D_NORMAL) \ - netdev_warn(dev, fmt, ##__VA_ARGS__); \ - else if ((x) < D_DURING) \ - netdev_info(dev, fmt, ##__VA_ARGS__); \ - else \ - netdev_dbg(dev, fmt, ##__VA_ARGS__); \ - } \ -} while (0) - -#define arc_cont(x, fmt, ...) \ -do { \ - if (BUGLVL(x)) \ - pr_cont(fmt, ##__VA_ARGS__); \ -} while (0) - -/* see how long a function call takes to run, expressed in CPU cycles */ -#define TIME(dev, name, bytes, call) \ -do { \ - if (BUGLVL(D_TIMING)) { \ - unsigned long _x, _y; \ - _x = get_cycles(); \ - call; \ - _y = get_cycles(); \ - arc_printk(D_TIMING, dev, \ - "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \ - name, bytes, _y - _x, \ - 100000000 / 1024 * bytes / (_y - _x + 1)); \ - } else { \ - call; \ - } \ -} while (0) - -/* - * Time needed to reset the card - in ms (milliseconds). This works on my - * SMC PC100. I can't find a reference that tells me just how long I - * should wait. - */ -#define RESETtime (300) - -/* - * These are the max/min lengths of packet payload, not including the - * arc_hardware header, but definitely including the soft header. - * - * Note: packet sizes 254, 255, 256 are impossible because of the way - * ARCnet registers work That's why RFC1201 defines "exception" packets. - * In non-RFC1201 protocols, we have to just tack some extra bytes on the - * end. - */ -#define MTU 253 /* normal packet max size */ -#define MinTU 257 /* extended packet min size */ -#define XMTU 508 /* extended packet max size */ - -/* status/interrupt mask bit fields */ -#define TXFREEflag 0x01 /* transmitter available */ -#define TXACKflag 0x02 /* transmitted msg. ackd */ -#define RECONflag 0x04 /* network reconfigured */ -#define TESTflag 0x08 /* test flag */ -#define EXCNAKflag 0x08 /* excesive nak flag */ -#define RESETflag 0x10 /* power-on-reset */ -#define RES1flag 0x20 /* reserved - usually set by jumper */ -#define RES2flag 0x40 /* reserved - usually set by jumper */ -#define NORXflag 0x80 /* receiver inhibited */ - -/* Flags used for IO-mapped memory operations */ -#define AUTOINCflag 0x40 /* Increase location with each access */ -#define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */ -#define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */ - -/* in the command register, the following bits have these meanings: - * 0-2 command - * 3-4 page number (for enable rcv/xmt command) - * 7 receive broadcasts - */ -#define NOTXcmd 0x01 /* disable transmitter */ -#define NORXcmd 0x02 /* disable receiver */ -#define TXcmd 0x03 /* enable transmitter */ -#define RXcmd 0x04 /* enable receiver */ -#define CONFIGcmd 0x05 /* define configuration */ -#define CFLAGScmd 0x06 /* clear flags */ -#define TESTcmd 0x07 /* load test flags */ - -/* flags for "clear flags" command */ -#define RESETclear 0x08 /* power-on-reset */ -#define CONFIGclear 0x10 /* system reconfigured */ - -#define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */ - -/* flags for "load test flags" command */ -#define TESTload 0x08 /* test flag (diagnostic) */ - -/* byte deposited into first address of buffers on reset */ -#define TESTvalue 0321 /* that's octal for 0xD1 :) */ - -/* for "enable receiver" command */ -#define RXbcasts 0x80 /* receive broadcasts */ - -/* flags for "define configuration" command */ -#define NORMALconf 0x00 /* 1-249 byte packets */ -#define EXTconf 0x08 /* 250-504 byte packets */ - -/* card feature flags, set during auto-detection. - * (currently only used by com20020pci) - */ -#define ARC_IS_5MBIT 1 /* card default speed is 5MBit */ -#define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit, - but default is 2.5MBit. */ - -/* information needed to define an encapsulation driver */ -struct ArcProto { - char suffix; /* a for RFC1201, e for ether-encap, etc. */ - int mtu; /* largest possible packet */ - int is_ip; /* This is a ip plugin - not a raw thing */ - - void (*rx)(struct net_device *dev, int bufnum, - struct archdr *pkthdr, int length); - int (*build_header)(struct sk_buff *skb, struct net_device *dev, - unsigned short ethproto, uint8_t daddr); - - /* these functions return '1' if the skb can now be freed */ - int (*prepare_tx)(struct net_device *dev, struct archdr *pkt, - int length, int bufnum); - int (*continue_tx)(struct net_device *dev, int bufnum); - int (*ack_tx)(struct net_device *dev, int acked); -}; - -extern struct ArcProto *arc_proto_map[256], *arc_proto_default, - *arc_bcast_proto, *arc_raw_proto; - -/* - * "Incoming" is information needed for each address that could be sending - * to us. Mostly for partially-received split packets. - */ -struct Incoming { - struct sk_buff *skb; /* packet data buffer */ - __be16 sequence; /* sequence number of assembly */ - uint8_t lastpacket, /* number of last packet (from 1) */ - numpackets; /* number of packets in split */ -}; - -/* only needed for RFC1201 */ -struct Outgoing { - struct ArcProto *proto; /* protocol driver that owns this: - * if NULL, no packet is pending. - */ - struct sk_buff *skb; /* buffer from upper levels */ - struct archdr *pkt; /* a pointer into the skb */ - uint16_t length, /* bytes total */ - dataleft, /* bytes left */ - segnum, /* segment being sent */ - numsegs; /* number of segments */ -}; - -struct arcnet_local { - uint8_t config, /* current value of CONFIG register */ - timeout, /* Extended timeout for COM20020 */ - backplane, /* Backplane flag for COM20020 */ - clockp, /* COM20020 clock divider */ - clockm, /* COM20020 clock multiplier flag */ - setup, /* Contents of setup1 register */ - setup2, /* Contents of setup2 register */ - intmask; /* current value of INTMASK register */ - uint8_t default_proto[256]; /* default encap to use for each host */ - int cur_tx, /* buffer used by current transmit, or -1 */ - next_tx, /* buffer where a packet is ready to send */ - cur_rx; /* current receive buffer */ - int lastload_dest, /* can last loaded packet be acked? */ - lasttrans_dest; /* can last TX'd packet be acked? */ - int timed_out; /* need to process TX timeout and drop packet */ - unsigned long last_timeout; /* time of last reported timeout */ - char *card_name; /* card ident string */ - int card_flags; /* special card features */ - - /* On preemtive and SMB a lock is needed */ - spinlock_t lock; - - /* - * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of - * which can be used for either sending or receiving. The new dynamic - * buffer management routines use a simple circular queue of available - * buffers, and take them as they're needed. This way, we simplify - * situations in which we (for example) want to pre-load a transmit - * buffer, or start receiving while we copy a received packet to - * memory. - * - * The rules: only the interrupt handler is allowed to _add_ buffers to - * the queue; thus, this doesn't require a lock. Both the interrupt - * handler and the transmit function will want to _remove_ buffers, so - * we need to handle the situation where they try to do it at the same - * time. - * - * If next_buf == first_free_buf, the queue is empty. Since there are - * only four possible buffers, the queue should never be full. - */ - atomic_t buf_lock; - int buf_queue[5]; - int next_buf, first_free_buf; - - /* network "reconfiguration" handling */ - unsigned long first_recon; /* time of "first" RECON message to count */ - unsigned long last_recon; /* time of most recent RECON */ - int num_recons; /* number of RECONs between first and last. */ - int network_down; /* do we think the network is down? */ - - int excnak_pending; /* We just got an excesive nak interrupt */ - - struct { - uint16_t sequence; /* sequence number (incs with each packet) */ - __be16 aborted_seq; - - struct Incoming incoming[256]; /* one from each address */ - } rfc1201; - - /* really only used by rfc1201, but we'll pretend it's not */ - struct Outgoing outgoing; /* packet currently being sent */ - - /* hardware-specific functions */ - struct { - struct module *owner; - void (*command)(struct net_device *dev, int cmd); - int (*status)(struct net_device *dev); - void (*intmask)(struct net_device *dev, int mask); - int (*reset)(struct net_device *dev, int really_reset); - void (*open)(struct net_device *dev); - void (*close)(struct net_device *dev); - - void (*copy_to_card)(struct net_device *dev, int bufnum, - int offset, void *buf, int count); - void (*copy_from_card)(struct net_device *dev, int bufnum, - int offset, void *buf, int count); - } hw; - - void __iomem *mem_start; /* pointer to ioremap'ed MMIO */ -}; - -#define ARCRESET(x) (lp->hw.reset(dev, (x))) -#define ACOMMAND(x) (lp->hw.command(dev, (x))) -#define ASTATUS() (lp->hw.status(dev)) -#define AINTMASK(x) (lp->hw.intmask(dev, (x))) - -#if ARCNET_DEBUG_MAX & D_SKB -void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc); -#else -static inline -void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) -{ -} -#endif - -void arcnet_unregister_proto(struct ArcProto *proto); -irqreturn_t arcnet_interrupt(int irq, void *dev_id); -struct net_device *alloc_arcdev(const char *name); - -int arcnet_open(struct net_device *dev); -int arcnet_close(struct net_device *dev); -netdev_tx_t arcnet_send_packet(struct sk_buff *skb, - struct net_device *dev); -void arcnet_timeout(struct net_device *dev); - -#endif /* __KERNEL__ */ -#endif /* _LINUX_ARCDEVICE_H */ diff --git a/include/linux/com20020.h b/include/linux/com20020.h deleted file mode 100644 index 85898995b234..000000000000 --- a/include/linux/com20020.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Linux ARCnet driver - COM20020 chipset support - function declarations - * - * Written 1997 by David Woodhouse. - * Written 1994-1999 by Avery Pennarun. - * Derived from skeleton.c by Donald Becker. - * - * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) - * for sponsoring the further development of this driver. - * - * ********************** - * - * The original copyright of skeleton.c was as follows: - * - * skeleton.c Written 1993 by Donald Becker. - * Copyright 1993 United States Government as represented by the - * Director, National Security Agency. This software may only be used - * and distributed according to the terms of the GNU General Public License as - * modified by SRC, incorporated herein by reference. - * - * ********************** - * - * For more details, see drivers/net/arcnet.c - * - * ********************** - */ -#ifndef __COM20020_H -#define __COM20020_H - -int com20020_check(struct net_device *dev); -int com20020_found(struct net_device *dev, int shared); -extern const struct net_device_ops com20020_netdev_ops; - -/* The number of low I/O ports used by the card. */ -#define ARCNET_TOTAL_SIZE 8 - -/* various register addresses */ -#ifdef CONFIG_SA1100_CT6001 -#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ -#else -#define BUS_ALIGN 1 -#endif - -#define PLX_PCI_MAX_CARDS 2 - -struct com20020_pci_channel_map { - u32 bar; - u32 offset; - u32 size; /* 0x00 - auto, e.g. length of entire bar */ -}; - -struct com20020_pci_card_info { - const char *name; - int devcount; - - struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS]; - - unsigned int flags; -}; - -struct com20020_priv { - struct com20020_pci_card_info *ci; - struct list_head list_dev; -}; - -struct com20020_dev { - struct list_head list; - struct net_device *dev; - - struct com20020_priv *pci_priv; - int index; -}; - -#define _INTMASK (ioaddr+BUS_ALIGN*0) /* writable */ -#define _STATUS (ioaddr+BUS_ALIGN*0) /* readable */ -#define _COMMAND (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */ -#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */ -#define _ADDR_HI (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */ -#define _ADDR_LO (ioaddr+BUS_ALIGN*3) -#define _MEMDATA (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */ -#define _SUBADR (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */ -#define _CONFIG (ioaddr+BUS_ALIGN*6) /* configuration register */ -#define _XREG (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG - or _SUBADR) */ - -/* in the ADDR_HI register */ -#define RDDATAflag 0x80 /* next access is a read (not a write) */ - -/* in the DIAGSTAT register */ -#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */ - -/* in the CONFIG register */ -#define RESETcfg 0x80 /* put card in reset state */ -#define TXENcfg 0x20 /* enable TX */ - -/* in SETUP register */ -#define PROMISCset 0x10 /* enable RCV_ALL */ -#define P1MODE 0x80 /* enable P1-MODE for Backplane */ -#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */ - -/* COM2002x */ -#define SUB_TENTATIVE 0 /* tentative node ID */ -#define SUB_NODE 1 /* node ID */ -#define SUB_SETUP1 2 /* various options */ -#define SUB_TEST 3 /* test/diag register */ - -/* COM20022 only */ -#define SUB_SETUP2 4 /* sundry options */ -#define SUB_BUSCTL 5 /* bus control options */ -#define SUB_DMACOUNT 6 /* DMA count options */ - -#define SET_SUBADR(x) do { \ - if ((x) < 4) \ - { \ - lp->config = (lp->config & ~0x03) | (x); \ - SETCONF; \ - } \ - else \ - { \ - outb(x, _SUBADR); \ - } \ -} while (0) - -#undef ARCRESET -#undef ASTATUS -#undef ACOMMAND -#undef AINTMASK - -#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \ - udelay(5); \ - outb(lp->config , _CONFIG); \ - } -#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG); \ - udelay(5); \ - outb(0x18 , _CONFIG); \ - } - -#define ASTATUS() inb(_STATUS) -#define ADIAGSTATUS() inb(_DIAGSTAT) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) - -#define SETCONF outb(lp->config, _CONFIG) - -#endif /* __COM20020_H */