From: Brian Norris Date: Sat, 8 Oct 2016 19:23:37 +0000 (-0700) Subject: Merge tag '4.9/mtd-pairing-scheme' of github.com:linux-nand/linux X-Git-Tag: v4.9-rc1~51^2 X-Git-Url: http://git.cascardo.info/?p=cascardo%2Flinux.git;a=commitdiff_plain;h=69db4aa44fdd8befc2eccd1313d841c5128c385c;hp=477b0229ac9bc275f6f8d2c27a2d08b246fccd0e Merge tag '4.9/mtd-pairing-scheme' of github.com:linux-nand/linux Introduction of the MTD pairing scheme concept. --- diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index 3733300de8dd..b05601600083 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -35,6 +35,15 @@ Optional NAND chip properties: - nand-ecc-step-size: integer representing the number of data bytes that are covered by a single ECC step. +- nand-ecc-maximize: boolean used to specify that you want to maximize ECC + strength. The maximum ECC strength is both controller and + chip dependent. The controller side has to select the ECC + config providing the best strength and taking the OOB area + size constraint into account. + This is particularly useful when only the in-band area is + used by the upper layers, and you want to make your NAND + as reliable as possible. + The ECC strength and ECC step size properties define the correction capability of a controller. Together, they say a controller can correct "{strength} bit errors per {size} bytes". diff --git a/MAINTAINERS b/MAINTAINERS index 20bb1d00098c..fe3a3f8565a3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5976,6 +5976,12 @@ M: Zubair Lutfullah Kakakhel S: Maintained F: drivers/dma/dma-jz4780.c +INGENIC JZ4780 NAND DRIVER +M: Harvey Hunt +L: linux-mtd@lists.infradead.org +S: Maintained +F: drivers/mtd/nand/jz4780_* + INTEGRITY MEASUREMENT ARCHITECTURE (IMA) M: Mimi Zohar M: Dmitry Kasatkin diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index e32a0ac2298f..c1f34f04e338 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -317,6 +317,18 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) return res; } +static int part_get_device(struct mtd_info *mtd) +{ + struct mtd_part *part = mtd_to_part(mtd); + return part->master->_get_device(part->master); +} + +static void part_put_device(struct mtd_info *mtd) +{ + struct mtd_part *part = mtd_to_part(mtd); + part->master->_put_device(part->master); +} + static int part_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { @@ -464,6 +476,12 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, slave->mtd._block_isbad = part_block_isbad; if (master->_block_markbad) slave->mtd._block_markbad = part_block_markbad; + + if (master->_get_device) + slave->mtd._get_device = part_get_device; + if (master->_put_device) + slave->mtd._put_device = part_put_device; + slave->mtd._erase = part_erase; slave->master = master; slave->offset = part->offset; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 21ff58099f3b..7b7a887b4709 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -88,11 +88,11 @@ config MTD_NAND_AMS_DELTA Support for NAND flash on Amstrad E3 (Delta). config MTD_NAND_OMAP2 - tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4" - depends on ARCH_OMAP2PLUS + tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone" + depends on (ARCH_OMAP2PLUS || ARCH_KEYSTONE) help - Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4 - platforms. + Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 + and Keystone platforms. config MTD_NAND_OMAP_BCH depends on MTD_NAND_OMAP2 @@ -428,7 +428,7 @@ config MTD_NAND_ORION config MTD_NAND_FSL_ELBC tristate "NAND support for Freescale eLBC controllers" - depends on PPC + depends on FSL_SOC select FSL_LBC help Various Freescale chips, including the 8313, include a NAND Flash @@ -438,7 +438,7 @@ config MTD_NAND_FSL_ELBC config MTD_NAND_FSL_IFC tristate "NAND support for Freescale IFC controller" - depends on MTD_NAND && (FSL_SOC || ARCH_LAYERSCAPE) + depends on FSL_SOC || ARCH_LAYERSCAPE select FSL_IFC select MEMORY help diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 37da4236ab90..3962f55bd034 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -761,8 +761,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, info); - spin_lock_init(&info->controller.lock); - init_waitqueue_head(&info->controller.wq); + nand_hw_control_init(&info->controller); info->device = &pdev->dev; info->platform = plat; diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index 8eb2c64df38c..9d2424bfdbf5 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -1336,7 +1336,7 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command, u32 *flash_cache = (u32 *)ctrl->flash_cache; int i; - brcmnand_soc_data_bus_prepare(ctrl->soc); + brcmnand_soc_data_bus_prepare(ctrl->soc, true); /* * Must cache the FLASH_CACHE now, since changes in @@ -1349,7 +1349,7 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command, */ flash_cache[i] = be32_to_cpu(brcmnand_read_fc(ctrl, i)); - brcmnand_soc_data_bus_unprepare(ctrl->soc); + brcmnand_soc_data_bus_unprepare(ctrl->soc, true); /* Cleanup from HW quirk: restore SECTOR_SIZE_1K */ if (host->hwcfg.sector_size_1k) @@ -1565,12 +1565,12 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip, brcmnand_waitfunc(mtd, chip); if (likely(buf)) { - brcmnand_soc_data_bus_prepare(ctrl->soc); + brcmnand_soc_data_bus_prepare(ctrl->soc, false); for (j = 0; j < FC_WORDS; j++, buf++) *buf = brcmnand_read_fc(ctrl, j); - brcmnand_soc_data_bus_unprepare(ctrl->soc); + brcmnand_soc_data_bus_unprepare(ctrl->soc, false); } if (oob) @@ -1815,12 +1815,12 @@ static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip, (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS); if (buf) { - brcmnand_soc_data_bus_prepare(ctrl->soc); + brcmnand_soc_data_bus_prepare(ctrl->soc, false); for (j = 0; j < FC_WORDS; j++, buf++) brcmnand_write_fc(ctrl, j, *buf); - brcmnand_soc_data_bus_unprepare(ctrl->soc); + brcmnand_soc_data_bus_unprepare(ctrl->soc, false); } else if (oob) { for (j = 0; j < FC_WORDS; j++) brcmnand_write_fc(ctrl, j, 0xffffffff); @@ -2370,8 +2370,7 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc) init_completion(&ctrl->done); init_completion(&ctrl->dma_done); - spin_lock_init(&ctrl->controller.lock); - init_waitqueue_head(&ctrl->controller.wq); + nand_hw_control_init(&ctrl->controller); INIT_LIST_HEAD(&ctrl->host_list); /* NAND register range */ diff --git a/drivers/mtd/nand/brcmnand/brcmnand.h b/drivers/mtd/nand/brcmnand/brcmnand.h index ef5eabba88e5..5c44cd4aba87 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.h +++ b/drivers/mtd/nand/brcmnand/brcmnand.h @@ -23,19 +23,22 @@ struct dev_pm_ops; struct brcmnand_soc { bool (*ctlrdy_ack)(struct brcmnand_soc *soc); void (*ctlrdy_set_enabled)(struct brcmnand_soc *soc, bool en); - void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare); + void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare, + bool is_param); }; -static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc) +static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc, + bool is_param) { if (soc && soc->prepare_data_bus) - soc->prepare_data_bus(soc, true); + soc->prepare_data_bus(soc, true, is_param); } -static inline void brcmnand_soc_data_bus_unprepare(struct brcmnand_soc *soc) +static inline void brcmnand_soc_data_bus_unprepare(struct brcmnand_soc *soc, + bool is_param) { if (soc && soc->prepare_data_bus) - soc->prepare_data_bus(soc, false); + soc->prepare_data_bus(soc, false, is_param); } static inline u32 brcmnand_readl(void __iomem *addr) diff --git a/drivers/mtd/nand/brcmnand/iproc_nand.c b/drivers/mtd/nand/brcmnand/iproc_nand.c index 585596c549b2..4c6ae113664d 100644 --- a/drivers/mtd/nand/brcmnand/iproc_nand.c +++ b/drivers/mtd/nand/brcmnand/iproc_nand.c @@ -74,7 +74,8 @@ static void iproc_nand_intc_set(struct brcmnand_soc *soc, bool en) spin_unlock_irqrestore(&priv->idm_lock, flags); } -static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare) +static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare, + bool is_param) { struct iproc_nand_soc *priv = container_of(soc, struct iproc_nand_soc, soc); @@ -86,10 +87,19 @@ static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare) val = brcmnand_readl(mmio); - if (prepare) - val |= IPROC_NAND_APB_LE_MODE; - else + /* + * In the case of BE or when dealing with NAND data, alway configure + * the APB bus to LE mode before accessing the FIFO and back to BE mode + * after the access is done + */ + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) || !is_param) { + if (prepare) + val |= IPROC_NAND_APB_LE_MODE; + else + val &= ~IPROC_NAND_APB_LE_MODE; + } else { /* when in LE accessing the parameter page, keep APB in BE */ val &= ~IPROC_NAND_APB_LE_MODE; + } brcmnand_writel(val, mmio); diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index cc07ba0f044d..27fa8b87cd5f 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -240,6 +240,9 @@ static void nand_davinci_hwctl_4bit(struct mtd_info *mtd, int mode) unsigned long flags; u32 val; + /* Reset ECC hardware */ + davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET); + spin_lock_irqsave(&davinci_nand_lock, flags); /* Start 4-bit ECC calculation for read/write */ diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index 47316998017f..7af2a3cd949e 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -1249,8 +1249,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE; nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA; nand->controller = &nand->hwcontrol; - spin_lock_init(&nand->controller->lock); - init_waitqueue_head(&nand->controller->wq); + nand_hw_control_init(nand->controller); /* methods */ nand->cmdfunc = docg4_command; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 60a88f24c6b3..113f76e59937 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -879,8 +879,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev) } elbc_fcm_ctrl->counter++; - spin_lock_init(&elbc_fcm_ctrl->controller.lock); - init_waitqueue_head(&elbc_fcm_ctrl->controller.wq); + nand_hw_control_init(&elbc_fcm_ctrl->controller); fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl; } else { elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 4e9e5fd8faf3..0a177b1bfe3e 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -987,8 +987,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) ifc_nand_ctrl->addr = NULL; fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl; - spin_lock_init(&ifc_nand_ctrl->controller.lock); - init_waitqueue_head(&ifc_nand_ctrl->controller.wq); + nand_hw_control_init(&ifc_nand_ctrl->controller); } else { ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand; } diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 6e461560c6a8..6c062b8251d2 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -318,7 +318,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) return -EINVAL; } - geo->page_size = mtd->writesize + mtd->oobsize; + geo->page_size = mtd->writesize + geo->metadata_size + + (geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8; geo->payload_size = mtd->writesize; /* diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c index 175f67da25af..a39bb70175ee 100644 --- a/drivers/mtd/nand/jz4780_nand.c +++ b/drivers/mtd/nand/jz4780_nand.c @@ -368,9 +368,8 @@ static int jz4780_nand_probe(struct platform_device *pdev) nfc->dev = dev; nfc->num_banks = num_banks; - spin_lock_init(&nfc->controller.lock); + nand_hw_control_init(&nfc->controller); INIT_LIST_HEAD(&nfc->chips); - init_waitqueue_head(&nfc->controller.wq); ret = jz4780_nand_init_chips(nfc, pdev); if (ret) { diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 5173fadc9a4e..d68314c8c399 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -152,6 +152,9 @@ struct mxc_nand_devtype_data { void (*select_chip)(struct mtd_info *mtd, int chip); int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); + int (*setup_data_interface)(struct mtd_info *mtd, + const struct nand_data_interface *conf, + bool check_only); /* * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked @@ -1012,6 +1015,82 @@ static void preset_v1(struct mtd_info *mtd) writew(0x4, NFC_V1_V2_WRPROT); } +static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd, + const struct nand_data_interface *conf, + bool check_only) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + struct mxc_nand_host *host = nand_get_controller_data(nand_chip); + int tRC_min_ns, tRC_ps, ret; + unsigned long rate, rate_round; + const struct nand_sdr_timings *timings; + u16 config1; + + timings = nand_get_sdr_timings(conf); + if (IS_ERR(timings)) + return -ENOTSUPP; + + config1 = readw(NFC_V1_V2_CONFIG1); + + tRC_min_ns = timings->tRC_min / 1000; + rate = 1000000000 / tRC_min_ns; + + /* + * For tRC < 30ns we have to use EDO mode. In this case the controller + * does one access per clock cycle. Otherwise the controller does one + * access in two clock cycles, thus we have to double the rate to the + * controller. + */ + if (tRC_min_ns < 30) { + rate_round = clk_round_rate(host->clk, rate); + config1 |= NFC_V2_CONFIG1_ONE_CYCLE; + tRC_ps = 1000000000 / (rate_round / 1000); + } else { + rate *= 2; + rate_round = clk_round_rate(host->clk, rate); + config1 &= ~NFC_V2_CONFIG1_ONE_CYCLE; + tRC_ps = 1000000000 / (rate_round / 1000 / 2); + } + + /* + * The timing values compared against are from the i.MX25 Automotive + * datasheet, Table 50. NFC Timing Parameters + */ + if (timings->tCLS_min > tRC_ps - 1000 || + timings->tCLH_min > tRC_ps - 2000 || + timings->tCS_min > tRC_ps - 1000 || + timings->tCH_min > tRC_ps - 2000 || + timings->tWP_min > tRC_ps - 1500 || + timings->tALS_min > tRC_ps || + timings->tALH_min > tRC_ps - 3000 || + timings->tDS_min > tRC_ps || + timings->tDH_min > tRC_ps - 5000 || + timings->tWC_min > 2 * tRC_ps || + timings->tWH_min > tRC_ps - 2500 || + timings->tRR_min > 6 * tRC_ps || + timings->tRP_min > 3 * tRC_ps / 2 || + timings->tRC_min > 2 * tRC_ps || + timings->tREH_min > (tRC_ps / 2) - 2500) { + dev_dbg(host->dev, "Timing out of bounds\n"); + return -EINVAL; + } + + if (check_only) + return 0; + + ret = clk_set_rate(host->clk, rate); + if (ret) + return ret; + + writew(config1, NFC_V1_V2_CONFIG1); + + dev_dbg(host->dev, "Setting rate to %ldHz, %s mode\n", rate_round, + config1 & NFC_V2_CONFIG1_ONE_CYCLE ? "One cycle (EDO)" : + "normal"); + + return 0; +} + static void preset_v2(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd_to_nand(mtd); @@ -1239,6 +1318,57 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, } } +static int mxc_nand_onfi_set_features(struct mtd_info *mtd, + struct nand_chip *chip, int addr, + u8 *subfeature_param) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + struct mxc_nand_host *host = nand_get_controller_data(nand_chip); + int i; + + if (!chip->onfi_version || + !(le16_to_cpu(chip->onfi_params.opt_cmd) + & ONFI_OPT_CMD_SET_GET_FEATURES)) + return -EINVAL; + + host->buf_start = 0; + + for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) + chip->write_byte(mtd, subfeature_param[i]); + + memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize); + host->devtype_data->send_cmd(host, NAND_CMD_SET_FEATURES, false); + mxc_do_addr_cycle(mtd, addr, -1); + host->devtype_data->send_page(mtd, NFC_INPUT); + + return 0; +} + +static int mxc_nand_onfi_get_features(struct mtd_info *mtd, + struct nand_chip *chip, int addr, + u8 *subfeature_param) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + struct mxc_nand_host *host = nand_get_controller_data(nand_chip); + int i; + + if (!chip->onfi_version || + !(le16_to_cpu(chip->onfi_params.opt_cmd) + & ONFI_OPT_CMD_SET_GET_FEATURES)) + return -EINVAL; + + host->devtype_data->send_cmd(host, NAND_CMD_GET_FEATURES, false); + mxc_do_addr_cycle(mtd, addr, -1); + host->devtype_data->send_page(mtd, NFC_OUTPUT); + memcpy32_fromio(host->data_buf, host->main_area0, 512); + host->buf_start = 0; + + for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) + *subfeature_param++ = chip->read_byte(mtd); + + return 0; +} + /* * The generic flash bbt decriptors overlap with our ecc * hardware, so define some i.MX specific ones. @@ -1327,6 +1457,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = { .ooblayout = &mxc_v2_ooblayout_ops, .select_chip = mxc_nand_select_chip_v2, .correct_data = mxc_nand_correct_data_v2_v3, + .setup_data_interface = mxc_nand_v2_setup_data_interface, .irqpending_quirk = 0, .needs_ip = 0, .regs_offset = 0x1e00, @@ -1434,7 +1565,7 @@ static const struct platform_device_id mxcnd_devtype[] = { }; MODULE_DEVICE_TABLE(platform, mxcnd_devtype); -#ifdef CONFIG_OF_MTD +#ifdef CONFIG_OF static const struct of_device_id mxcnd_dt_ids[] = { { .compatible = "fsl,imx21-nand", @@ -1513,6 +1644,8 @@ static int mxcnd_probe(struct platform_device *pdev) this->read_word = mxc_nand_read_word; this->write_buf = mxc_nand_write_buf; this->read_buf = mxc_nand_read_buf; + this->onfi_set_features = mxc_nand_onfi_set_features; + this->onfi_get_features = mxc_nand_onfi_get_features; host->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) @@ -1533,6 +1666,8 @@ static int mxcnd_probe(struct platform_device *pdev) if (err < 0) return err; + this->setup_data_interface = host->devtype_data->setup_data_interface; + if (host->devtype_data->needs_ip) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->regs_ip = devm_ioremap_resource(&pdev->dev, res); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 77533f7f2429..e5718e5ecf92 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -745,7 +745,10 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, column >>= 1; chip->cmd_ctrl(mtd, column, ctrl); ctrl &= ~NAND_CTRL_CHANGE; - chip->cmd_ctrl(mtd, column >> 8, ctrl); + + /* Only output a single addr cycle for 8bits opcodes. */ + if (!nand_opcode_8bits(command)) + chip->cmd_ctrl(mtd, column >> 8, ctrl); } if (page_addr != -1) { chip->cmd_ctrl(mtd, page_addr, ctrl); @@ -947,6 +950,172 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) return status; } +/** + * nand_reset_data_interface - Reset data interface and timings + * @chip: The NAND chip + * + * Reset the Data interface and timings to ONFI mode 0. + * + * Returns 0 for success or negative error code otherwise. + */ +static int nand_reset_data_interface(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + const struct nand_data_interface *conf; + int ret; + + if (!chip->setup_data_interface) + return 0; + + /* + * The ONFI specification says: + * " + * To transition from NV-DDR or NV-DDR2 to the SDR data + * interface, the host shall use the Reset (FFh) command + * using SDR timing mode 0. A device in any timing mode is + * required to recognize Reset (FFh) command issued in SDR + * timing mode 0. + * " + * + * Configure the data interface in SDR mode and set the + * timings to timing mode 0. + */ + + conf = nand_get_default_data_interface(); + ret = chip->setup_data_interface(mtd, conf, false); + if (ret) + pr_err("Failed to configure data interface to SDR timing mode 0\n"); + + return ret; +} + +/** + * nand_setup_data_interface - Setup the best data interface and timings + * @chip: The NAND chip + * + * Find and configure the best data interface and NAND timings supported by + * the chip and the driver. + * First tries to retrieve supported timing modes from ONFI information, + * and if the NAND chip does not support ONFI, relies on the + * ->onfi_timing_mode_default specified in the nand_ids table. + * + * Returns 0 for success or negative error code otherwise. + */ +static int nand_setup_data_interface(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; + + if (!chip->setup_data_interface || !chip->data_interface) + return 0; + + /* + * Ensure the timing mode has been changed on the chip side + * before changing timings on the controller side. + */ + if (chip->onfi_version) { + u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = { + chip->onfi_timing_mode_default, + }; + + ret = chip->onfi_set_features(mtd, chip, + ONFI_FEATURE_ADDR_TIMING_MODE, + tmode_param); + if (ret) + goto err; + } + + ret = chip->setup_data_interface(mtd, chip->data_interface, false); +err: + return ret; +} + +/** + * nand_init_data_interface - find the best data interface and timings + * @chip: The NAND chip + * + * Find the best data interface and NAND timings supported by the chip + * and the driver. + * First tries to retrieve supported timing modes from ONFI information, + * and if the NAND chip does not support ONFI, relies on the + * ->onfi_timing_mode_default specified in the nand_ids table. After this + * function nand_chip->data_interface is initialized with the best timing mode + * available. + * + * Returns 0 for success or negative error code otherwise. + */ +static int nand_init_data_interface(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + int modes, mode, ret; + + if (!chip->setup_data_interface) + return 0; + + /* + * First try to identify the best timings from ONFI parameters and + * if the NAND does not support ONFI, fallback to the default ONFI + * timing mode. + */ + modes = onfi_get_async_timing_mode(chip); + if (modes == ONFI_TIMING_MODE_UNKNOWN) { + if (!chip->onfi_timing_mode_default) + return 0; + + modes = GENMASK(chip->onfi_timing_mode_default, 0); + } + + chip->data_interface = kzalloc(sizeof(*chip->data_interface), + GFP_KERNEL); + if (!chip->data_interface) + return -ENOMEM; + + for (mode = fls(modes) - 1; mode >= 0; mode--) { + ret = onfi_init_data_interface(chip, chip->data_interface, + NAND_SDR_IFACE, mode); + if (ret) + continue; + + ret = chip->setup_data_interface(mtd, chip->data_interface, + true); + if (!ret) { + chip->onfi_timing_mode_default = mode; + break; + } + } + + return 0; +} + +static void nand_release_data_interface(struct nand_chip *chip) +{ + kfree(chip->data_interface); +} + +/** + * nand_reset - Reset and initialize a NAND device + * @chip: The NAND chip + * + * Returns 0 for success or negative error code otherwise + */ +int nand_reset(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; + + ret = nand_reset_data_interface(chip); + if (ret) + return ret; + + chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + + ret = nand_setup_data_interface(chip); + if (ret) + return ret; + + return 0; +} + /** * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks * @mtd: mtd info @@ -1025,7 +1194,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) * some operation can also clear the bit 7 of status register * eg. erase/program a locked block */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -1084,7 +1253,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) * some operation can also clear the bit 7 of status register * eg. erase/program a locked block */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -2162,7 +2331,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, static int nand_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { - int ret = -ENOTSUPP; + int ret; ops->retlen = 0; @@ -2173,24 +2342,18 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from, return -EINVAL; } - nand_get_device(mtd, FL_READING); - - switch (ops->mode) { - case MTD_OPS_PLACE_OOB: - case MTD_OPS_AUTO_OOB: - case MTD_OPS_RAW: - break; + if (ops->mode != MTD_OPS_PLACE_OOB && + ops->mode != MTD_OPS_AUTO_OOB && + ops->mode != MTD_OPS_RAW) + return -ENOTSUPP; - default: - goto out; - } + nand_get_device(mtd, FL_READING); if (!ops->datbuf) ret = nand_do_read_oob(mtd, from, ops); else ret = nand_do_read_ops(mtd, from, ops); -out: nand_release_device(mtd); return ret; } @@ -2788,7 +2951,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, * if we don't do this. I have no clue why, but I seem to have 'fixed' * it in the doc2000 driver in August 1999. dwmw2. */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -3191,8 +3354,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) if (!chip->controller) { chip->controller = &chip->hwcontrol; - spin_lock_init(&chip->controller->lock); - init_waitqueue_head(&chip->controller->wq); + nand_hw_control_init(chip->controller); } } @@ -3829,7 +3991,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) * after power-up. */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); @@ -4113,6 +4275,9 @@ static int nand_dt_init(struct nand_chip *chip) if (ecc_step > 0) chip->ecc.size = ecc_step; + if (of_property_read_bool(dn, "nand-ecc-maximize")) + chip->ecc.options |= NAND_ECC_MAXIMIZE; + return 0; } @@ -4141,6 +4306,15 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, if (!mtd->name && mtd->dev.parent) mtd->name = dev_name(mtd->dev.parent); + if ((!chip->cmdfunc || !chip->select_chip) && !chip->cmd_ctrl) { + /* + * Default functions assigned for chip_select() and + * cmdfunc() both expect cmd_ctrl() to be populated, + * so we need to check that that's the case + */ + pr_err("chip.cmd_ctrl() callback is not provided"); + return -EINVAL; + } /* Set the default functions */ nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16); @@ -4155,13 +4329,17 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, return PTR_ERR(type); } + ret = nand_init_data_interface(chip); + if (ret) + return ret; + chip->select_chip(mtd, -1); /* Check for a chip array */ for (i = 1; i < maxchips; i++) { chip->select_chip(mtd, i); /* See comment in nand_get_flash_type for reset */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ @@ -4221,6 +4399,7 @@ static int nand_set_ecc_soft_ops(struct mtd_info *mtd) ecc->write_page_raw = nand_write_page_raw; ecc->read_oob = nand_read_oob_std; ecc->write_oob = nand_write_oob_std; + /* * Board driver should supply ecc.size and ecc.strength * values to select how many bits are correctable. @@ -4243,6 +4422,25 @@ static int nand_set_ecc_soft_ops(struct mtd_info *mtd) } mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + + } + + /* + * We can only maximize ECC config when the default layout is + * used, otherwise we don't know how many bytes can really be + * used. + */ + if (mtd->ooblayout == &nand_ooblayout_lp_ops && + ecc->options & NAND_ECC_MAXIMIZE) { + int steps, bytes; + + /* Always prefer 1k blocks over 512bytes ones */ + ecc->size = 1024; + steps = mtd->writesize / ecc->size; + + /* Reserve 2 bytes for the BBM */ + bytes = (mtd->oobsize - 2) / steps; + ecc->strength = bytes * 8 / fls(8 * ecc->size); } /* See nand_bch_init() for details. */ @@ -4601,18 +4799,16 @@ int nand_scan(struct mtd_info *mtd, int maxchips) EXPORT_SYMBOL(nand_scan); /** - * nand_release - [NAND Interface] Free resources held by the NAND device - * @mtd: MTD device structure + * nand_cleanup - [NAND Interface] Free resources held by the NAND device + * @chip: NAND chip object */ -void nand_release(struct mtd_info *mtd) +void nand_cleanup(struct nand_chip *chip) { - struct nand_chip *chip = mtd_to_nand(mtd); - if (chip->ecc.mode == NAND_ECC_SOFT && chip->ecc.algo == NAND_ECC_BCH) nand_bch_free((struct nand_bch_control *)chip->ecc.priv); - mtd_device_unregister(mtd); + nand_release_data_interface(chip); /* Free bad block table memory */ kfree(chip->bbt); @@ -4624,6 +4820,18 @@ void nand_release(struct mtd_info *mtd) & NAND_BBT_DYNAMICSTRUCT) kfree(chip->badblock_pattern); } +EXPORT_SYMBOL_GPL(nand_cleanup); + +/** + * nand_release - [NAND Interface] Unregister the MTD device and free resources + * held by the NAND device + * @mtd: MTD device structure + */ +void nand_release(struct mtd_info *mtd) +{ + mtd_device_unregister(mtd); + nand_cleanup(mtd_to_nand(mtd)); +} EXPORT_SYMBOL_GPL(nand_release); MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 2fbb523df066..7695efea65f2 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -604,6 +604,100 @@ static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf, search_bbt(mtd, buf, md); } +/** + * get_bbt_block - Get the first valid eraseblock suitable to store a BBT + * @this: the NAND device + * @td: the BBT description + * @md: the mirror BBT descriptor + * @chip: the CHIP selector + * + * This functions returns a positive block number pointing a valid eraseblock + * suitable to store a BBT (i.e. in the range reserved for BBT), or -ENOSPC if + * all blocks are already used of marked bad. If td->pages[chip] was already + * pointing to a valid block we re-use it, otherwise we search for the next + * valid one. + */ +static int get_bbt_block(struct nand_chip *this, struct nand_bbt_descr *td, + struct nand_bbt_descr *md, int chip) +{ + int startblock, dir, page, numblocks, i; + + /* + * There was already a version of the table, reuse the page. This + * applies for absolute placement too, as we have the page number in + * td->pages. + */ + if (td->pages[chip] != -1) + return td->pages[chip] >> + (this->bbt_erase_shift - this->page_shift); + + numblocks = (int)(this->chipsize >> this->bbt_erase_shift); + if (!(td->options & NAND_BBT_PERCHIP)) + numblocks *= this->numchips; + + /* + * Automatic placement of the bad block table. Search direction + * top -> down? + */ + if (td->options & NAND_BBT_LASTBLOCK) { + startblock = numblocks * (chip + 1) - 1; + dir = -1; + } else { + startblock = chip * numblocks; + dir = 1; + } + + for (i = 0; i < td->maxblocks; i++) { + int block = startblock + dir * i; + + /* Check, if the block is bad */ + switch (bbt_get_entry(this, block)) { + case BBT_BLOCK_WORN: + case BBT_BLOCK_FACTORY_BAD: + continue; + } + + page = block << (this->bbt_erase_shift - this->page_shift); + + /* Check, if the block is used by the mirror table */ + if (!md || md->pages[chip] != page) + return block; + } + + return -ENOSPC; +} + +/** + * mark_bbt_block_bad - Mark one of the block reserved for BBT bad + * @this: the NAND device + * @td: the BBT description + * @chip: the CHIP selector + * @block: the BBT block to mark + * + * Blocks reserved for BBT can become bad. This functions is an helper to mark + * such blocks as bad. It takes care of updating the in-memory BBT, marking the + * block as bad using a bad block marker and invalidating the associated + * td->pages[] entry. + */ +static void mark_bbt_block_bad(struct nand_chip *this, + struct nand_bbt_descr *td, + int chip, int block) +{ + struct mtd_info *mtd = nand_to_mtd(this); + loff_t to; + int res; + + bbt_mark_entry(this, block, BBT_BLOCK_WORN); + + to = (loff_t)block << this->bbt_erase_shift; + res = this->block_markbad(mtd, to); + if (res) + pr_warn("nand_bbt: error %d while marking block %d bad\n", + res, block); + + td->pages[chip] = -1; +} + /** * write_bbt - [GENERIC] (Re)write the bad block table * @mtd: MTD device structure @@ -621,7 +715,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_chip *this = mtd_to_nand(mtd); struct erase_info einfo; int i, res, chip = 0; - int bits, startblock, dir, page, offs, numblocks, sft, sftmsk; + int bits, page, offs, numblocks, sft, sftmsk; int nrchips, pageoffs, ooboffs; uint8_t msk[4]; uint8_t rcode = td->reserved_block_code; @@ -652,46 +746,21 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, } /* Loop through the chips */ - for (; chip < nrchips; chip++) { - /* - * There was already a version of the table, reuse the page - * This applies for absolute placement too, as we have the - * page nr. in td->pages. - */ - if (td->pages[chip] != -1) { - page = td->pages[chip]; - goto write; + while (chip < nrchips) { + int block; + + block = get_bbt_block(this, td, md, chip); + if (block < 0) { + pr_err("No space left to write bad block table\n"); + res = block; + goto outerr; } /* - * Automatic placement of the bad block table. Search direction - * top -> down? + * get_bbt_block() returns a block number, shift the value to + * get a page number. */ - if (td->options & NAND_BBT_LASTBLOCK) { - startblock = numblocks * (chip + 1) - 1; - dir = -1; - } else { - startblock = chip * numblocks; - dir = 1; - } - - for (i = 0; i < td->maxblocks; i++) { - int block = startblock + dir * i; - /* Check, if the block is bad */ - switch (bbt_get_entry(this, block)) { - case BBT_BLOCK_WORN: - case BBT_BLOCK_FACTORY_BAD: - continue; - } - page = block << - (this->bbt_erase_shift - this->page_shift); - /* Check, if the block is used by the mirror table */ - if (!md || md->pages[chip] != page) - goto write; - } - pr_err("No space left to write bad block table\n"); - return -ENOSPC; - write: + page = block << (this->bbt_erase_shift - this->page_shift); /* Set up shift count and masks for the flash table */ bits = td->options & NAND_BBT_NRBITS_MSK; @@ -787,20 +856,28 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, einfo.addr = to; einfo.len = 1 << this->bbt_erase_shift; res = nand_erase_nand(mtd, &einfo, 1); - if (res < 0) - goto outerr; + if (res < 0) { + pr_warn("nand_bbt: error while erasing BBT block %d\n", + res); + mark_bbt_block_bad(this, td, chip, block); + continue; + } res = scan_write_bbt(mtd, to, len, buf, td->options & NAND_BBT_NO_OOB ? NULL : &buf[len]); - if (res < 0) - goto outerr; + if (res < 0) { + pr_warn("nand_bbt: error while writing BBT block %d\n", + res); + mark_bbt_block_bad(this, td, chip, block); + continue; + } pr_info("Bad block table written to 0x%012llx, version 0x%02X\n", (unsigned long long)to, td->version[chip]); /* Mark it as used */ - td->pages[chip] = page; + td->pages[chip++] = page; } return 0; diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c index e81470a8ac67..13a587407be3 100644 --- a/drivers/mtd/nand/nand_timings.c +++ b/drivers/mtd/nand/nand_timings.c @@ -13,228 +13,246 @@ #include #include -static const struct nand_sdr_timings onfi_sdr_timings[] = { +static const struct nand_data_interface onfi_sdr_timings[] = { /* Mode 0 */ { - .tADL_min = 200000, - .tALH_min = 20000, - .tALS_min = 50000, - .tAR_min = 25000, - .tCEA_max = 100000, - .tCEH_min = 20000, - .tCH_min = 20000, - .tCHZ_max = 100000, - .tCLH_min = 20000, - .tCLR_min = 20000, - .tCLS_min = 50000, - .tCOH_min = 0, - .tCS_min = 70000, - .tDH_min = 20000, - .tDS_min = 40000, - .tFEAT_max = 1000000, - .tIR_min = 10000, - .tITC_max = 1000000, - .tRC_min = 100000, - .tREA_max = 40000, - .tREH_min = 30000, - .tRHOH_min = 0, - .tRHW_min = 200000, - .tRHZ_max = 200000, - .tRLOH_min = 0, - .tRP_min = 50000, - .tRST_max = 250000000000ULL, - .tWB_max = 200000, - .tRR_min = 40000, - .tWC_min = 100000, - .tWH_min = 30000, - .tWHR_min = 120000, - .tWP_min = 50000, - .tWW_min = 100000, + .type = NAND_SDR_IFACE, + .timings.sdr = { + .tADL_min = 400000, + .tALH_min = 20000, + .tALS_min = 50000, + .tAR_min = 25000, + .tCEA_max = 100000, + .tCEH_min = 20000, + .tCH_min = 20000, + .tCHZ_max = 100000, + .tCLH_min = 20000, + .tCLR_min = 20000, + .tCLS_min = 50000, + .tCOH_min = 0, + .tCS_min = 70000, + .tDH_min = 20000, + .tDS_min = 40000, + .tFEAT_max = 1000000, + .tIR_min = 10000, + .tITC_max = 1000000, + .tRC_min = 100000, + .tREA_max = 40000, + .tREH_min = 30000, + .tRHOH_min = 0, + .tRHW_min = 200000, + .tRHZ_max = 200000, + .tRLOH_min = 0, + .tRP_min = 50000, + .tRR_min = 40000, + .tRST_max = 250000000000ULL, + .tWB_max = 200000, + .tWC_min = 100000, + .tWH_min = 30000, + .tWHR_min = 120000, + .tWP_min = 50000, + .tWW_min = 100000, + }, }, /* Mode 1 */ { - .tADL_min = 100000, - .tALH_min = 10000, - .tALS_min = 25000, - .tAR_min = 10000, - .tCEA_max = 45000, - .tCEH_min = 20000, - .tCH_min = 10000, - .tCHZ_max = 50000, - .tCLH_min = 10000, - .tCLR_min = 10000, - .tCLS_min = 25000, - .tCOH_min = 15000, - .tCS_min = 35000, - .tDH_min = 10000, - .tDS_min = 20000, - .tFEAT_max = 1000000, - .tIR_min = 0, - .tITC_max = 1000000, - .tRC_min = 50000, - .tREA_max = 30000, - .tREH_min = 15000, - .tRHOH_min = 15000, - .tRHW_min = 100000, - .tRHZ_max = 100000, - .tRLOH_min = 0, - .tRP_min = 25000, - .tRR_min = 20000, - .tRST_max = 500000000, - .tWB_max = 100000, - .tWC_min = 45000, - .tWH_min = 15000, - .tWHR_min = 80000, - .tWP_min = 25000, - .tWW_min = 100000, + .type = NAND_SDR_IFACE, + .timings.sdr = { + .tADL_min = 400000, + .tALH_min = 10000, + .tALS_min = 25000, + .tAR_min = 10000, + .tCEA_max = 45000, + .tCEH_min = 20000, + .tCH_min = 10000, + .tCHZ_max = 50000, + .tCLH_min = 10000, + .tCLR_min = 10000, + .tCLS_min = 25000, + .tCOH_min = 15000, + .tCS_min = 35000, + .tDH_min = 10000, + .tDS_min = 20000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 50000, + .tREA_max = 30000, + .tREH_min = 15000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 0, + .tRP_min = 25000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 45000, + .tWH_min = 15000, + .tWHR_min = 80000, + .tWP_min = 25000, + .tWW_min = 100000, + }, }, /* Mode 2 */ { - .tADL_min = 100000, - .tALH_min = 10000, - .tALS_min = 15000, - .tAR_min = 10000, - .tCEA_max = 30000, - .tCEH_min = 20000, - .tCH_min = 10000, - .tCHZ_max = 50000, - .tCLH_min = 10000, - .tCLR_min = 10000, - .tCLS_min = 15000, - .tCOH_min = 15000, - .tCS_min = 25000, - .tDH_min = 5000, - .tDS_min = 15000, - .tFEAT_max = 1000000, - .tIR_min = 0, - .tITC_max = 1000000, - .tRC_min = 35000, - .tREA_max = 25000, - .tREH_min = 15000, - .tRHOH_min = 15000, - .tRHW_min = 100000, - .tRHZ_max = 100000, - .tRLOH_min = 0, - .tRR_min = 20000, - .tRST_max = 500000000, - .tWB_max = 100000, - .tRP_min = 17000, - .tWC_min = 35000, - .tWH_min = 15000, - .tWHR_min = 80000, - .tWP_min = 17000, - .tWW_min = 100000, + .type = NAND_SDR_IFACE, + .timings.sdr = { + .tADL_min = 400000, + .tALH_min = 10000, + .tALS_min = 15000, + .tAR_min = 10000, + .tCEA_max = 30000, + .tCEH_min = 20000, + .tCH_min = 10000, + .tCHZ_max = 50000, + .tCLH_min = 10000, + .tCLR_min = 10000, + .tCLS_min = 15000, + .tCOH_min = 15000, + .tCS_min = 25000, + .tDH_min = 5000, + .tDS_min = 15000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 35000, + .tREA_max = 25000, + .tREH_min = 15000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 0, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tRP_min = 17000, + .tWC_min = 35000, + .tWH_min = 15000, + .tWHR_min = 80000, + .tWP_min = 17000, + .tWW_min = 100000, + }, }, /* Mode 3 */ { - .tADL_min = 100000, - .tALH_min = 5000, - .tALS_min = 10000, - .tAR_min = 10000, - .tCEA_max = 25000, - .tCEH_min = 20000, - .tCH_min = 5000, - .tCHZ_max = 50000, - .tCLH_min = 5000, - .tCLR_min = 10000, - .tCLS_min = 10000, - .tCOH_min = 15000, - .tCS_min = 25000, - .tDH_min = 5000, - .tDS_min = 10000, - .tFEAT_max = 1000000, - .tIR_min = 0, - .tITC_max = 1000000, - .tRC_min = 30000, - .tREA_max = 20000, - .tREH_min = 10000, - .tRHOH_min = 15000, - .tRHW_min = 100000, - .tRHZ_max = 100000, - .tRLOH_min = 0, - .tRP_min = 15000, - .tRR_min = 20000, - .tRST_max = 500000000, - .tWB_max = 100000, - .tWC_min = 30000, - .tWH_min = 10000, - .tWHR_min = 80000, - .tWP_min = 15000, - .tWW_min = 100000, + .type = NAND_SDR_IFACE, + .timings.sdr = { + .tADL_min = 400000, + .tALH_min = 5000, + .tALS_min = 10000, + .tAR_min = 10000, + .tCEA_max = 25000, + .tCEH_min = 20000, + .tCH_min = 5000, + .tCHZ_max = 50000, + .tCLH_min = 5000, + .tCLR_min = 10000, + .tCLS_min = 10000, + .tCOH_min = 15000, + .tCS_min = 25000, + .tDH_min = 5000, + .tDS_min = 10000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 30000, + .tREA_max = 20000, + .tREH_min = 10000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 0, + .tRP_min = 15000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 30000, + .tWH_min = 10000, + .tWHR_min = 80000, + .tWP_min = 15000, + .tWW_min = 100000, + }, }, /* Mode 4 */ { - .tADL_min = 70000, - .tALH_min = 5000, - .tALS_min = 10000, - .tAR_min = 10000, - .tCEA_max = 25000, - .tCEH_min = 20000, - .tCH_min = 5000, - .tCHZ_max = 30000, - .tCLH_min = 5000, - .tCLR_min = 10000, - .tCLS_min = 10000, - .tCOH_min = 15000, - .tCS_min = 20000, - .tDH_min = 5000, - .tDS_min = 10000, - .tFEAT_max = 1000000, - .tIR_min = 0, - .tITC_max = 1000000, - .tRC_min = 25000, - .tREA_max = 20000, - .tREH_min = 10000, - .tRHOH_min = 15000, - .tRHW_min = 100000, - .tRHZ_max = 100000, - .tRLOH_min = 5000, - .tRP_min = 12000, - .tRR_min = 20000, - .tRST_max = 500000000, - .tWB_max = 100000, - .tWC_min = 25000, - .tWH_min = 10000, - .tWHR_min = 80000, - .tWP_min = 12000, - .tWW_min = 100000, + .type = NAND_SDR_IFACE, + .timings.sdr = { + .tADL_min = 400000, + .tALH_min = 5000, + .tALS_min = 10000, + .tAR_min = 10000, + .tCEA_max = 25000, + .tCEH_min = 20000, + .tCH_min = 5000, + .tCHZ_max = 30000, + .tCLH_min = 5000, + .tCLR_min = 10000, + .tCLS_min = 10000, + .tCOH_min = 15000, + .tCS_min = 20000, + .tDH_min = 5000, + .tDS_min = 10000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 25000, + .tREA_max = 20000, + .tREH_min = 10000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 5000, + .tRP_min = 12000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 25000, + .tWH_min = 10000, + .tWHR_min = 80000, + .tWP_min = 12000, + .tWW_min = 100000, + }, }, /* Mode 5 */ { - .tADL_min = 70000, - .tALH_min = 5000, - .tALS_min = 10000, - .tAR_min = 10000, - .tCEA_max = 25000, - .tCEH_min = 20000, - .tCH_min = 5000, - .tCHZ_max = 30000, - .tCLH_min = 5000, - .tCLR_min = 10000, - .tCLS_min = 10000, - .tCOH_min = 15000, - .tCS_min = 15000, - .tDH_min = 5000, - .tDS_min = 7000, - .tFEAT_max = 1000000, - .tIR_min = 0, - .tITC_max = 1000000, - .tRC_min = 20000, - .tREA_max = 16000, - .tREH_min = 7000, - .tRHOH_min = 15000, - .tRHW_min = 100000, - .tRHZ_max = 100000, - .tRLOH_min = 5000, - .tRP_min = 10000, - .tRR_min = 20000, - .tRST_max = 500000000, - .tWB_max = 100000, - .tWC_min = 20000, - .tWH_min = 7000, - .tWHR_min = 80000, - .tWP_min = 10000, - .tWW_min = 100000, + .type = NAND_SDR_IFACE, + .timings.sdr = { + .tADL_min = 400000, + .tALH_min = 5000, + .tALS_min = 10000, + .tAR_min = 10000, + .tCEA_max = 25000, + .tCEH_min = 20000, + .tCH_min = 5000, + .tCHZ_max = 30000, + .tCLH_min = 5000, + .tCLR_min = 10000, + .tCLS_min = 10000, + .tCOH_min = 15000, + .tCS_min = 15000, + .tDH_min = 5000, + .tDS_min = 7000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 20000, + .tREA_max = 16000, + .tREH_min = 7000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 5000, + .tRP_min = 10000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 20000, + .tWH_min = 7000, + .tWHR_min = 80000, + .tWP_min = 10000, + .tWW_min = 100000, + }, }, }; @@ -248,6 +266,46 @@ const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode) if (mode < 0 || mode >= ARRAY_SIZE(onfi_sdr_timings)) return ERR_PTR(-EINVAL); - return &onfi_sdr_timings[mode]; + return &onfi_sdr_timings[mode].timings.sdr; } EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings); + +/** + * onfi_init_data_interface - [NAND Interface] Initialize a data interface from + * given ONFI mode + * @iface: The data interface to be initialized + * @mode: The ONFI timing mode + */ +int onfi_init_data_interface(struct nand_chip *chip, + struct nand_data_interface *iface, + enum nand_data_interface_type type, + int timing_mode) +{ + if (type != NAND_SDR_IFACE) + return -EINVAL; + + if (timing_mode < 0 || timing_mode >= ARRAY_SIZE(onfi_sdr_timings)) + return -EINVAL; + + *iface = onfi_sdr_timings[timing_mode]; + + /* + * TODO: initialize timings that cannot be deduced from timing mode: + * tR, tPROG, tCCS, ... + * These information are part of the ONFI parameter page. + */ + + return 0; +} +EXPORT_SYMBOL(onfi_init_data_interface); + +/** + * nand_get_default_data_interface - [NAND Interface] Retrieve NAND + * data interface for mode 0. This is used as default timing after + * reset. + */ +const struct nand_data_interface *nand_get_default_data_interface(void) +{ + return &onfi_sdr_timings[0]; +} +EXPORT_SYMBOL(nand_get_default_data_interface); diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 218c789ca7ab..28e6118362f7 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -218,8 +218,7 @@ static int ndfc_probe(struct platform_device *ofdev) ndfc = &ndfc_ctrl[cs]; ndfc->chip_select = cs; - spin_lock_init(&ndfc->ndfc_control.lock); - init_waitqueue_head(&ndfc->ndfc_control.wq); + nand_hw_control_init(&ndfc->ndfc_control); ndfc->ofdev = ofdev; dev_set_drvdata(&ofdev->dev, ndfc); diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index a59361c36f40..5513bfd9cdc9 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -2169,7 +2169,7 @@ scan_tail: return 0; return_error: - if (info->dma) + if (!IS_ERR_OR_NULL(info->dma)) dma_release_channel(info->dma); if (nand_chip->ecc.priv) { nand_bch_free(nand_chip->ecc.priv); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 436dd6dc11f4..b121bf4ed73a 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1810,8 +1810,7 @@ static int alloc_nand_resource(struct platform_device *pdev) chip->cmdfunc = nand_cmdfunc; } - spin_lock_init(&chip->controller->lock); - init_waitqueue_head(&chip->controller->wq); + nand_hw_control_init(chip->controller); info->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(info->clk)) { dev_err(&pdev->dev, "failed to get nand clock\n"); diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index de7d28e62d4e..57d483ac5765 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -1957,8 +1957,7 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc) INIT_LIST_HEAD(&nandc->desc_list); INIT_LIST_HEAD(&nandc->host_list); - spin_lock_init(&nandc->controller.lock); - init_waitqueue_head(&nandc->controller.wq); + nand_hw_control_init(&nandc->controller); return 0; } diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index d9309cf0ce2e..d459c19d78de 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -180,7 +180,7 @@ struct s3c2410_nand_info { enum s3c_cpu_type cpu_type; -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ struct notifier_block freq_transition; #endif }; @@ -701,7 +701,7 @@ static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, /* cpufreq driver support */ -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb, unsigned long val, void *data) @@ -977,8 +977,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, info); - spin_lock_init(&info->controller.lock); - init_waitqueue_head(&info->controller.wq); + nand_hw_control_init(&info->controller); /* get the clock source and enable it */ diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 6fa3bcd59769..442ce619b3b6 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -397,7 +397,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, struct dma_chan *chan; enum dma_transfer_direction tr_dir; dma_addr_t dma_addr; - dma_cookie_t cookie = -EINVAL; + dma_cookie_t cookie; uint32_t reg; int ret; @@ -423,6 +423,12 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, desc->callback = flctl_dma_complete; desc->callback_param = flctl; cookie = dmaengine_submit(desc); + if (dma_submit_error(cookie)) { + ret = dma_submit_error(cookie); + dev_warn(&flctl->pdev->dev, + "DMA submit failed, falling back to PIO\n"); + goto out; + } dma_async_issue_pending(chan); } else { diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index e414b31b71c1..8b8470c4e6d0 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1572,14 +1572,22 @@ static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration, #define sunxi_nand_lookup_timing(l, p, c) \ _sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c) -static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, - const struct nand_sdr_timings *timings) +static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, + const struct nand_data_interface *conf, + bool check_only) { + struct nand_chip *nand = mtd_to_nand(mtd); + struct sunxi_nand_chip *chip = to_sunxi_nand(nand); struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller); + const struct nand_sdr_timings *timings; u32 min_clk_period = 0; s32 tWB, tADL, tWHR, tRHW, tCAD; long real_clk_rate; + timings = nand_get_sdr_timings(conf); + if (IS_ERR(timings)) + return -ENOTSUPP; + /* T1 <=> tCLS */ if (timings->tCLS_min > min_clk_period) min_clk_period = timings->tCLS_min; @@ -1679,6 +1687,9 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, return tRHW; } + if (check_only) + return 0; + /* * TODO: according to ONFI specs this value only applies for DDR NAND, * but Allwinner seems to set this to 0x7. Mimic them for now. @@ -1712,44 +1723,6 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, return 0; } -static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip, - struct device_node *np) -{ - struct mtd_info *mtd = nand_to_mtd(&chip->nand); - const struct nand_sdr_timings *timings; - int ret; - int mode; - - mode = onfi_get_async_timing_mode(&chip->nand); - if (mode == ONFI_TIMING_MODE_UNKNOWN) { - mode = chip->nand.onfi_timing_mode_default; - } else { - uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; - int i; - - mode = fls(mode) - 1; - if (mode < 0) - mode = 0; - - feature[0] = mode; - for (i = 0; i < chip->nsels; i++) { - chip->nand.select_chip(mtd, i); - ret = chip->nand.onfi_set_features(mtd, &chip->nand, - ONFI_FEATURE_ADDR_TIMING_MODE, - feature); - chip->nand.select_chip(mtd, -1); - if (ret) - return ret; - } - } - - timings = onfi_async_timing_mode_to_sdr_timings(mode); - if (IS_ERR(timings)) - return PTR_ERR(timings); - - return sunxi_nand_chip_set_timings(chip, timings); -} - static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { @@ -1814,6 +1787,35 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, int ret; int i; + if (ecc->options & NAND_ECC_MAXIMIZE) { + int bytes; + + ecc->size = 1024; + nsectors = mtd->writesize / ecc->size; + + /* Reserve 2 bytes for the BBM */ + bytes = (mtd->oobsize - 2) / nsectors; + + /* 4 non-ECC bytes are added before each ECC bytes section */ + bytes -= 4; + + /* and bytes has to be even. */ + if (bytes % 2) + bytes--; + + ecc->strength = bytes * 8 / fls(8 * ecc->size); + + for (i = 0; i < ARRAY_SIZE(strengths); i++) { + if (strengths[i] > ecc->strength) + break; + } + + if (!i) + ecc->strength = 0; + else + ecc->strength = strengths[i - 1]; + } + if (ecc->size != 512 && ecc->size != 1024) return -EINVAL; @@ -1975,7 +1977,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, struct device_node *np) { - const struct nand_sdr_timings *timings; struct sunxi_nand_chip *chip; struct mtd_info *mtd; struct nand_chip *nand; @@ -2065,25 +2066,11 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, nand->read_buf = sunxi_nfc_read_buf; nand->write_buf = sunxi_nfc_write_buf; nand->read_byte = sunxi_nfc_read_byte; + nand->setup_data_interface = sunxi_nfc_setup_data_interface; mtd = nand_to_mtd(nand); mtd->dev.parent = dev; - timings = onfi_async_timing_mode_to_sdr_timings(0); - if (IS_ERR(timings)) { - ret = PTR_ERR(timings); - dev_err(dev, - "could not retrieve timings for ONFI mode 0: %d\n", - ret); - return ret; - } - - ret = sunxi_nand_chip_set_timings(chip, timings); - if (ret) { - dev_err(dev, "could not configure chip timings: %d\n", ret); - return ret; - } - ret = nand_scan_ident(mtd, nsels, NULL); if (ret) return ret; @@ -2096,12 +2083,6 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, nand->options |= NAND_SUBPAGE_READ; - ret = sunxi_nand_chip_init_timings(chip, np); - if (ret) { - dev_err(dev, "could not configure chip timings: %d\n", ret); - return ret; - } - ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np); if (ret) { dev_err(dev, "ECC init failed: %d\n", ret); @@ -2175,8 +2156,7 @@ static int sunxi_nfc_probe(struct platform_device *pdev) return -ENOMEM; nfc->dev = dev; - spin_lock_init(&nfc->controller.lock); - init_waitqueue_head(&nfc->controller.wq); + nand_hw_control_init(&nfc->controller); INIT_LIST_HEAD(&nfc->chips); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 04d63f56baa4..0a14fda2e41b 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -303,8 +303,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) dev_info(&dev->dev, "CLK:%ldMHz HOLD:%d SPW:%d\n", (gbusclk + 500000) / 1000000, hold, spw); - spin_lock_init(&drvdata->hw_control.lock); - init_waitqueue_head(&drvdata->hw_control.wq); + nand_hw_control_init(&drvdata->hw_control); platform_set_drvdata(dev, drvdata); txx9ndfmc_initialize(dev); diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index bc07ad30c9bf..ba7b034b2b91 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -90,10 +90,6 @@ config OF_PCI_IRQ help OpenFirmware PCI IRQ routing helpers -config OF_MTD - depends on MTD - def_bool y - config OF_RESERVED_MEM depends on OF_EARLY_FLATTREE bool diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 8dd6e01f45c0..c5d3d5024fc8 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -29,26 +29,26 @@ struct nand_flash_dev; struct device_node; /* Scan and identify a NAND device */ -extern int nand_scan(struct mtd_info *mtd, int max_chips); +int nand_scan(struct mtd_info *mtd, int max_chips); /* * Separate phases of nand_scan(), allowing board driver to intervene * and override command or ECC setup according to flash type. */ -extern int nand_scan_ident(struct mtd_info *mtd, int max_chips, +int nand_scan_ident(struct mtd_info *mtd, int max_chips, struct nand_flash_dev *table); -extern int nand_scan_tail(struct mtd_info *mtd); +int nand_scan_tail(struct mtd_info *mtd); -/* Free resources held by the NAND device */ -extern void nand_release(struct mtd_info *mtd); +/* Unregister the MTD device and free resources held by the NAND device */ +void nand_release(struct mtd_info *mtd); /* Internal helper for board drivers which need to override command function */ -extern void nand_wait_ready(struct mtd_info *mtd); +void nand_wait_ready(struct mtd_info *mtd); /* locks all blocks present in the device */ -extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); /* unlocks specified locked blocks */ -extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 @@ -141,6 +141,7 @@ enum nand_ecc_algo { * pages and you want to rely on the default implementation. */ #define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) +#define NAND_ECC_MAXIMIZE BIT(1) /* Bit mask for flags passed to do_nand_read_ecc */ #define NAND_GET_DEVICE 0x80 @@ -460,6 +461,13 @@ struct nand_hw_control { wait_queue_head_t wq; }; +static inline void nand_hw_control_init(struct nand_hw_control *nfc) +{ + nfc->active = NULL; + spin_lock_init(&nfc->lock); + init_waitqueue_head(&nfc->wq); +} + /** * struct nand_ecc_ctrl - Control structure for ECC * @mode: ECC mode @@ -565,6 +573,123 @@ struct nand_buffers { uint8_t *databuf; }; +/** + * struct nand_sdr_timings - SDR NAND chip timings + * + * This struct defines the timing requirements of a SDR NAND chip. + * These information can be found in every NAND datasheets and the timings + * meaning are described in the ONFI specifications: + * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing + * Parameters) + * + * All these timings are expressed in picoseconds. + * + * @tALH_min: ALE hold time + * @tADL_min: ALE to data loading time + * @tALS_min: ALE setup time + * @tAR_min: ALE to RE# delay + * @tCEA_max: CE# access time + * @tCEH_min: + * @tCH_min: CE# hold time + * @tCHZ_max: CE# high to output hi-Z + * @tCLH_min: CLE hold time + * @tCLR_min: CLE to RE# delay + * @tCLS_min: CLE setup time + * @tCOH_min: CE# high to output hold + * @tCS_min: CE# setup time + * @tDH_min: Data hold time + * @tDS_min: Data setup time + * @tFEAT_max: Busy time for Set Features and Get Features + * @tIR_min: Output hi-Z to RE# low + * @tITC_max: Interface and Timing Mode Change time + * @tRC_min: RE# cycle time + * @tREA_max: RE# access time + * @tREH_min: RE# high hold time + * @tRHOH_min: RE# high to output hold + * @tRHW_min: RE# high to WE# low + * @tRHZ_max: RE# high to output hi-Z + * @tRLOH_min: RE# low to output hold + * @tRP_min: RE# pulse width + * @tRR_min: Ready to RE# low (data only) + * @tRST_max: Device reset time, measured from the falling edge of R/B# to the + * rising edge of R/B#. + * @tWB_max: WE# high to SR[6] low + * @tWC_min: WE# cycle time + * @tWH_min: WE# high hold time + * @tWHR_min: WE# high to RE# low + * @tWP_min: WE# pulse width + * @tWW_min: WP# transition to WE# low + */ +struct nand_sdr_timings { + u32 tALH_min; + u32 tADL_min; + u32 tALS_min; + u32 tAR_min; + u32 tCEA_max; + u32 tCEH_min; + u32 tCH_min; + u32 tCHZ_max; + u32 tCLH_min; + u32 tCLR_min; + u32 tCLS_min; + u32 tCOH_min; + u32 tCS_min; + u32 tDH_min; + u32 tDS_min; + u32 tFEAT_max; + u32 tIR_min; + u32 tITC_max; + u32 tRC_min; + u32 tREA_max; + u32 tREH_min; + u32 tRHOH_min; + u32 tRHW_min; + u32 tRHZ_max; + u32 tRLOH_min; + u32 tRP_min; + u32 tRR_min; + u64 tRST_max; + u32 tWB_max; + u32 tWC_min; + u32 tWH_min; + u32 tWHR_min; + u32 tWP_min; + u32 tWW_min; +}; + +/** + * enum nand_data_interface_type - NAND interface timing type + * @NAND_SDR_IFACE: Single Data Rate interface + */ +enum nand_data_interface_type { + NAND_SDR_IFACE, +}; + +/** + * struct nand_data_interface - NAND interface timing + * @type: type of the timing + * @timings: The timing, type according to @type + */ +struct nand_data_interface { + enum nand_data_interface_type type; + union { + struct nand_sdr_timings sdr; + } timings; +}; + +/** + * nand_get_sdr_timings - get SDR timing from data interface + * @conf: The data interface + */ +static inline const struct nand_sdr_timings * +nand_get_sdr_timings(const struct nand_data_interface *conf) +{ + if (conf->type != NAND_SDR_IFACE) + return ERR_PTR(-EINVAL); + + return &conf->timings.sdr; +} + /** * struct nand_chip - NAND Private Flash Chip Data * @mtd: MTD device registered to the MTD framework @@ -627,10 +752,9 @@ struct nand_buffers { * also from the datasheet. It is the recommended ECC step * size, if known; if unknown, set to zero. * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is - * either deduced from the datasheet if the NAND - * chip is not ONFI compliant or set to 0 if it is - * (an ONFI chip is always configured in mode 0 - * after a NAND reset) + * set to the actually used ONFI mode if the chip is + * ONFI compliant or deduced from the datasheet if + * the NAND chip is not ONFI compliant. * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 @@ -650,6 +774,7 @@ struct nand_buffers { * @read_retries: [INTERN] the number of read retry modes supported * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand + * @setup_data_interface: [OPTIONAL] setup the data interface and timing * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash * lookup. @@ -696,6 +821,10 @@ struct nand_chip { int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, int feature_addr, uint8_t *subfeature_para); int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode); + int (*setup_data_interface)(struct mtd_info *mtd, + const struct nand_data_interface *conf, + bool check_only); + int chip_delay; unsigned int options; @@ -725,6 +854,8 @@ struct nand_chip { struct nand_jedec_params jedec_params; }; + struct nand_data_interface *data_interface; + int read_retries; flstate_t state; @@ -893,14 +1024,14 @@ struct nand_manufacturers { extern struct nand_flash_dev nand_flash_ids[]; extern struct nand_manufacturers nand_manuf_ids[]; -extern int nand_default_bbt(struct mtd_info *mtd); -extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); -extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs); -extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); -extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, - int allowbbt); -extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf); +int nand_default_bbt(struct mtd_info *mtd); +int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); +int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs); +int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); +int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, + int allowbbt); +int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, uint8_t *buf); /** * struct platform_nand_chip - chip level device structure @@ -988,6 +1119,11 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); } +int onfi_init_data_interface(struct nand_chip *chip, + struct nand_data_interface *iface, + enum nand_data_interface_type type, + int timing_mode); + /* * Check if it is a SLC nand. * The !nand_is_slc() can be used to check the MLC/TLC nand chips. @@ -1023,57 +1159,10 @@ static inline int jedec_feature(struct nand_chip *chip) : 0; } -/* - * struct nand_sdr_timings - SDR NAND chip timings - * - * This struct defines the timing requirements of a SDR NAND chip. - * These informations can be found in every NAND datasheets and the timings - * meaning are described in the ONFI specifications: - * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing - * Parameters) - * - * All these timings are expressed in picoseconds. - */ - -struct nand_sdr_timings { - u32 tALH_min; - u32 tADL_min; - u32 tALS_min; - u32 tAR_min; - u32 tCEA_max; - u32 tCEH_min; - u32 tCH_min; - u32 tCHZ_max; - u32 tCLH_min; - u32 tCLR_min; - u32 tCLS_min; - u32 tCOH_min; - u32 tCS_min; - u32 tDH_min; - u32 tDS_min; - u32 tFEAT_max; - u32 tIR_min; - u32 tITC_max; - u32 tRC_min; - u32 tREA_max; - u32 tREH_min; - u32 tRHOH_min; - u32 tRHW_min; - u32 tRHZ_max; - u32 tRLOH_min; - u32 tRP_min; - u32 tRR_min; - u64 tRST_max; - u32 tWB_max; - u32 tWC_min; - u32 tWH_min; - u32 tWHR_min; - u32 tWP_min; - u32 tWW_min; -}; - /* get timing characteristics from ONFI timing mode. */ const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode); +/* get data interface from ONFI timing mode 0, used after reset. */ +const struct nand_data_interface *nand_get_default_data_interface(void); int nand_check_erased_ecc_chunk(void *data, int datalen, void *ecc, int ecclen, @@ -1093,4 +1182,11 @@ int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page); /* Default read_oob syndrome implementation */ int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page); + +/* Reset and initialize a NAND device */ +int nand_reset(struct nand_chip *chip); + +/* Free resources held by the NAND device */ +void nand_cleanup(struct nand_chip *chip); + #endif /* __LINUX_MTD_NAND_H */