From: Ben Greear <greearb@candelatech.com>
Date: Mon, 24 Nov 2014 14:22:10 +0000 (+0200)
Subject: ath10k: use configured nss instead of max nss
X-Git-Tag: v3.19-rc1~118^2~28^2~42^2~22
X-Git-Url: http://git.cascardo.info/?p=cascardo%2Flinux.git;a=commitdiff_plain;h=b116ea190be57f44c95f511d2ee7afb814c1d288

ath10k: use configured nss instead of max nss

When re-associating a station, the nss was set back to
maximum value even if user had configured small number
of tx chains.  So, pay attention to user's config in
this case as well.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7df23794ecd5..21931e147fff 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4147,6 +4147,10 @@ ath10k_default_bitrate_mask(struct ath10k *ar,
 	u32 legacy = 0x00ff;
 	u8 ht = 0xff, i;
 	u16 vht = 0x3ff;
+	u16 nrf = ar->num_rf_chains;
+
+	if (ar->cfg_tx_chainmask)
+		nrf = get_nss_from_chainmask(ar->cfg_tx_chainmask);
 
 	switch (band) {
 	case IEEE80211_BAND_2GHZ:
@@ -4162,11 +4166,11 @@ ath10k_default_bitrate_mask(struct ath10k *ar,
 	if (mask->control[band].legacy != legacy)
 		return false;
 
-	for (i = 0; i < ar->num_rf_chains; i++)
+	for (i = 0; i < nrf; i++)
 		if (mask->control[band].ht_mcs[i] != ht)
 			return false;
 
-	for (i = 0; i < ar->num_rf_chains; i++)
+	for (i = 0; i < nrf; i++)
 		if (mask->control[band].vht_mcs[i] != vht)
 			return false;
 
@@ -4417,6 +4421,9 @@ static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
 	u8 fixed_nss = ar->num_rf_chains;
 	u8 force_sgi;
 
+	if (ar->cfg_tx_chainmask)
+		fixed_nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
 	force_sgi = mask->control[band].gi;
 	if (force_sgi == NL80211_TXRATE_FORCE_LGI)
 		return -EINVAL;