Merge branch 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next

These changes from Liviu add support for atomic mode setting, add the
TMDS clock limitation according to the device, and ensure that we
correctly clean up in the unbind function.

* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/i2c: tda998x: Add support for atomic modesetting
  drm/i2c: tda998x: increase the supported dotclock frequency to 165MHz for TDA19988
  drm/i2c: tda998x: unregister the connector in the unbind function

Merge branch 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next

These are the patches from Daniel Vetter, getting rid of struct_mutex
from the Armada DRM driver.

* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: use a private mutex to protect priv->linear
  drm/armada: drop struct_mutex from cursor paths
  drm/armada: don't grab dev->struct_mutex for in mmap offset ioctl
  drm/armada: plug leak in dumb_map_offset
  drm/armada: use unlocked gem unreferencing

Merge tag 'drm-vc4-next-2015-12-21' of github.com/anholt/linux into drm-next

I've decided to just send this fixes-for-next pull request now, even if
we don't have a patch for the CONFIG_PM_SLEEP build failure reviewed.
If you like my patch for that, I'd be happy to see it applied directly.

This pull request brings in little fixes from Dan Carpenter for the 3D
support added in this -next cycle.

* tag 'drm-vc4-next-2015-12-21' of http://github.com/anholt/linux:
  drm/vc4: fix an error code
  drm/vc4: allocate enough memory in vc4_save_hang_state()
  drm/vc4: copy_to_user() returns the number of bytes remaining

Merge branch 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux into drm-next

here is the pull request for the etnaviv DRM driver. It includes the DT bindings
and the driver itself, platform devicetree changes will be merged through the
respective SoC trees. Otherwise it's just a squashed version of the V2 patches
that have been on the list for a while.

* 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux:
  MAINTAINERS: add maintainer and reviewers for the etnaviv DRM driver
  drm/etnaviv: add initial etnaviv DRM driver
  drm/etnaviv: add devicetree bindings
  devicetree: add vendor prefix for Vivante Corporation

Merge tag 'topic/drm-misc-2015-12-18' of git://anongit.freedesktop.org/drm-intel into drm-next

Seems I lied in my last drm-misc pull request and suddenly there's a big
pile of random stuff. Boris dug out Thierry's drm-trivial branch and
resubmitted everything since that branch didn't really work out.

On top of that Nicolas' changes to drm_dev_set_unique - this might
conflict with new driver pulls (I double checked and current drm-next
should be fine), so please beware. The -next/-fixes conflict in vmwgfx
will change slightly with this here too.

* tag 'topic/drm-misc-2015-12-18' of git://anongit.freedesktop.org/drm-intel: (36 commits)
  drm: use dev_name as default unique name in drm_dev_alloc()
  drm: make drm_dev_set_unique() not use a format string
  drm/vmwgfx: Constify function pointer structs
  drm/udl: Constify function pointer structs
  drm/tegra: Constify function pointer structs
  drm/rockchip: Constify function pointer structs
  drm/nouveau: Constify function pointer structs
  drm/mgag200: Constify function pointer structs
  drm/imx: Constify function pointer structs
  drm/i2c/sil164: Constify function pointer structs
  drm/i2c/adv7511: Constify function pointer structs
  drm/exynos: Constify function pointer structs
  drm/cirrus: Constify function pointer structs
  drm/i2c/ch7006: Constify function pointer structs
  drm/bridge/nxp-ptn3460: Constify function pointer structs
  drm/bridge/dw_hdmi: Constify function pointer structs
  drm/bochs: Constify function pointer structs
  drm/atmel-hlcdc: Constify function pointer structs
  drm/armada: Constify function pointer structs
  drm: Constify drm_encoder_slave_funcs
  ...

dt-bindings: Move panel bindings to correct location

Device tree bindings for display panels have moved to a new location.
Unfortunately some of the new bindings added recently ended up in the
old location. Move them to their proper place.

Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/vc4: fix an error code

"exec->exec_bo" is NULL at this point so this code returns success.  We
want to return -ENOMEM.

Fixes: d5b1a78a772f ('drm/vc4: Add support for drawing 3D frames.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

drm/vc4: allocate enough memory in vc4_save_hang_state()

"state" is smaller than "kernel_state" so we end up corrupting memory.

Fixes: 214613656b51 ('drm/vc4: Add an interface for capturing the GPU state after a hang.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

drm/vc4: copy_to_user() returns the number of bytes remaining

The copy_to/from_user() functions return the number of bytes remaining
to be copied.  We want to return error codes here.

Also it's a bad idea to print an error message if a copy from user fails
because users can use that to spam /var/log/messages which is annoying
so I removed those.

Fixes: 214613656b51 ('drm/vc4: Add an interface for capturing the GPU state after a hang.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

Merge tag 'drm/tegra/for-4.5-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v4.5-rc1

This adds support for the version of host1x found on Tegra210 SoCs. It
also makes use of the new atomic suspend/resume functionality to bring
this feature to Tegra.

Other than that it's mostly small fixes and cleanups, with some prep-
work for things that will hopefully get merged for the next release.

* tag 'drm/tegra/for-4.5-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: Advertise DRIVER_ATOMIC
  drm/tegra: Use DRIVER level for IOMMU aperture message
  drm/tegra: checking for IS_ERR() instead of NULL
  drm/tegra: dc: Add missing of_node_put()
  drm/tegra: Implement subsystem-level suspend/resume
  drm/tegra: sor: Remove unnecessary conditional
  drm/tegra: sor: Operate on struct drm_dp_aux *
  drm/tegra: Use drm_gem_object_unreference_unlocked()
  drm/tegra: Don't take dev->struct_mutex in mmap offset ioctl
  drm/tegra: Use unlocked gem unreferencing
  drm/tegra: Use new multi-driver module helpers
  gpu: host1x: Add Tegra210 support
  gpu: host1x: Remove core driver on unregister
  gpu: host1x: Use platform_register/unregister_drivers()

Merge tag 'drm/panel/for-4.5-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.5-rc1

This set of changes brings in a few more helpers for DSI support as well
as a couple of new drivers and support for some more simple panels.

* tag 'drm/panel/for-4.5-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Add QiaoDian qd43003c0-40
  of: Add vendor prefix for QiaoDian Xianshi
  drm/panel: add kernel doc for size attributes in panel_desc
  drm/panel: simple: Add support for Kyocera TCG121XGLP panel
  devicetree: add vendor prefix for Kyocera Corporation
  drm/bridge: Remove gratuitous blank line
  drm/bridge: dw-hdmi: Use dashes in filenames
  drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel
  dt-bindings: Add Sharp LS043T1LE01 panel binding
  drm/dsi: Add Turn On/Shutdown Peripheral command helpers
  drm/panel: Add Panasonic VVX10F034N00 MIPI DSI panel
  dt-bindings: Add Panasonic VVX10F034N00 panel binding
  drm/panel: simple: Add support for Innolux G121X1-L03
  drm/panel: simple: Add support for BOE TV080WUM-NL0
  dt-bindings: Add BOE TV080WUM-NL0 panel binding
  of: Add vendor prefix for BOE Technology Group
  drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format

drm/panel: simple: Add QiaoDian qd43003c0-40

The QiaoDian Xianshi QD43003C0-40 is a 4"3 TFT LCD panel.

Timings from the OTA5180A document, ver 0.9, section
10.1.1:
  http://www.orientdisplay.com/pdf/OTA5180A.pdf

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

of: Add vendor prefix for QiaoDian Xianshi

Use "qiaodian" as the vendor prefix for QiaoDian Xianshi Corporation in
device tree compatible strings.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/panel: add kernel doc for size attributes in panel_desc

Document that 'width' and 'height' are measured in millimeters.

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/panel: simple: Add support for Kyocera TCG121XGLP panel

The Kyocera TCG121XGLP panel is an XGA LCD TFT panel connected through
LVDS, which can be supported by the simple panel driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

devicetree: add vendor prefix for Kyocera Corporation

KYO is the stock ticker symbol of Kyocera Corporation.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

MAINTAINERS: add maintainer and reviewers for the etnaviv DRM driver

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: add initial etnaviv DRM driver

This adds the etnaviv DRM driver and hooks it up in Makefiles
and Kconfig.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/etnaviv: add devicetree bindings

Etnaviv follows the same priciple as imx-drm to have a virtual
master device node to bind all the individual GPU cores together
into one DRM device.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>

drm: use dev_name as default unique name in drm_dev_alloc()

The following code pattern exists in some DRM drivers:

    ddev = drm_dev_alloc(&driver, parent_dev);
    drm_dev_set_unique(ddev, dev_name(parent_dev));

(Sometimes dev_name(ddev->dev) is used, which is the same.)

As suggested in
http://lists.freedesktop.org/archives/dri-devel/2015-December/096441.html,
the unique name of a new DRM device can be set as dev_name(parent_dev)
when parent_dev is not NULL (vgem is a special case).

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: make drm_dev_set_unique() not use a format string

drm_dev_set_unique() uses a format string to define the unique name of a
device.  This feature is not used as currently all the calls to this
function either use "%s" as a format string or directly use
dev_name().

Even though this second kind of call does not introduce security
problems, because there cannot be "%" characters in dev_name() results,
gcc issues a warning when building with -Wformat-security flag
("warning: format string is not a string literal (potentially
insecure)").  This warning is useful to find real bugs like the one
fixed by commit 3958b79266b1 ("configfs: fix kernel infoleak through
user-controlled format string").  False positives which do not bring
an extra value make the work of finding real bugs harder.

Therefore remove the format-string feature from drm_dev_set_unique().

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1449829228-4425-1-git-send-email-nicolas.iooss_linux@m4x.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/vmwgfx: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/vmwgfx/vmwgfx.ko:
-.text                       132244
+.text                       132240
-.rodata                      18296
+.rodata                      18680
-.data                         5096
+.data                         4712

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-28-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/udl: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/udl/udl.ko:
-.text                       11336
+.text                       11332
-.rodata                       560
+.rodata                       684
-.data                         696
+.data                         572

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-27-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/tegra: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/tegra/tegra-drm.ko:
-.rodata                     13672
+.rodata                     13684
-.data                        1108
+.data                        1096

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-26-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/rockchip: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.ko:
-.rodata                      772
+.rodata                      828
-.data                        148
+.data                         92

 drivers/gpu/drm/rockchip/rockchipdrm.ko:
-.rodata                      748
+.rodata                      760
-.data                        448
+.data                        436

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-25-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/nouveau: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/nouveau/nouveau.ko:
-.rodata                      105688
+.rodata                      105792
-.data                        125724
+.data                        125620

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-24-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/mgag200: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/mgag200/mgag200.ko:
-.text                       29244
+.text                       29232
-.rodata                       600
+.rodata                       668
-.data                         688
+.data                         620

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-23-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/imx: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/imx/imxdrm.ko:
-.rodata                      624
+.rodata                      652
-.data                        372
+.data                        344

 drivers/gpu/drm/imx/imx-ipuv3-crtc.ko:
-.rodata                      224
+.rodata                      280
-.data                        184
+.data                        128

 drivers/gpu/drm/imx/imx-ldb.ko:
-.rodata                      660
+.rodata                      784
-.data                        240
+.data                        116

 drivers/gpu/drm/imx/imx-tve.ko:
-.rodata                      400
+.rodata                      524
-.data                        416
+.data                        292

 drivers/gpu/drm/imx/parallel-display.ko:
-.rodata                      400
+.rodata                      524
-.data                        216
+.data                         92

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-22-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i2c/sil164: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/i2c/sil164.ko:
-.text                       1660
+.text                       1656
-.rodata                       56
+.rodata                      104
-.data                        212
+.data                        164

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-21-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i2c/adv7511: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/i2c/adv7511.ko:
-.rodata                     1368
+.rodata                     1416
-.data                        164
+.data                        116

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-20-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/exynos: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/exynos/exynosdrm.ko:
-.text                       125792
+.text                       125788
-.rodata                      10972
+.rodata                      11748
-.data                         6720
+.data                         5944

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-19-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/cirrus: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/cirrus/cirrus.ko:
-.text                       10104
+.text                       10092
-.rodata                       528
+.rodata                       596
-.data                         608
+.data                         540

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-18-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i2c/ch7006: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/i2c/ch7006.ko:
-.text                        5752
+.text                        5760
-.rodata                      6608
+.rodata                      6656
-.data                         216
+.data                         168

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-17-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bridge/nxp-ptn3460: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/bridge/nxp-ptn3460.ko:
-.rodata                      440
+.rodata                      536
-.data                        208
+.data                        112

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-16-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bridge/dw_hdmi: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/bridge/dw_hdmi.ko:
-.rodata                      120
+.rodata                      216
-.data                         96
+.data                          0

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-15-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bochs: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/bochs/bochs-drm.ko:
-.text                        7608
+.text                        7600
-.rodata                       648
+.rodata                       716
-.data                         612
+.data                         544

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-14-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/atmel-hlcdc: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

drivers/gpu/drm/atmel-hlcdc/atmel-hlcdc-dc.ko:
-.text                       12488
+.text                       12480
-.rodata                      1696
+.rodata                      1760
-.data                         776
+.data                         712

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-13-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/armada: Constify function pointer structs

Moves a bunch of junk to .rodata from .data.

drivers/gpu/drm/armada/armada.ko:
-.rodata                      1040
+.rodata                      1100
-.data                        1156
+.data                        1096

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-12-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Constify drm_encoder_slave_funcs

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-11-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: atmel-hlcdc: Fix module autoload for OF platform driver

This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-29-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: atmel-hlcdc: add support for sama5d2 SoCs

As the hardware description for this chip is the same as the sama5d4, we use
this SoC structures for layers and DC descriptions. Thus only 2 lines are added
to the atmel_hlcdc_of_match table.
The compatible string is already documented in the parent MFD driver's binding.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-10-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/qxl: use to_qxl_bo macro

Instead of using container_of directly use to_qxl_bo macro.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-9-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/vmwgfx: check kmalloc return value

srf->sizes has been allocated and checked a few lines above; fix up
the copy-pasto so that we check srf->offsets.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-8-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/vmwgfx: use kzalloc in vmw_surface_define_ioctl()

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-7-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/omap: use kzalloc in sita_init()

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-6-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/imx: Drop pipe field from struct imx_drm_crtc

Use the drm_crtc_index() helper to determine the pipe number of the CRTC
instead.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-5-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/imx: Make pipe number unsigned

There's no reason whatsoever why this should ever be negative. The same
goes for the number of pipes added to the DRM device.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-4-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bochs: Store correct CRTC index in events

Previously a negative pipe caused a special case to be triggered for
drivers that didn't have proper VBLANK support. The trigger for this
special case is now independent of the pipe, so the correct CRTC index
can now be stored in events.

v2: convert to use drm_crtc_send_vblank_event()

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-3-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/gma500: Sanity-check pipe index

If the DSI output isn't connected, then mdfld_dsi_encoder_get_pipe()
will return -1. The mdfld_dsi_dp_mode_set() function doesn't properly
check for this condition and causes the following compiler warnings:

  CC      drivers/gpu/drm/gma500/mdfld_dsi_dpi.o
drivers/gpu/drm/gma500/mdfld_dsi_dpi.c: In function ‘mdfld_dsi_dpi_mode_set’:
drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:828:35: warning: array subscript is below array bounds [-Warray-bounds]
  u32 pipeconf = dev_priv->pipeconf[pipe];
                                   ^
drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:829:33: warning: array subscript is below array bounds [-Warray-bounds]
  u32 dspcntr = dev_priv->dspcntr[pipe];
                                 ^

Fix this by checking for a valid pipe before indexing the pipeconf and
dspcntr arrays.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-2-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Use the driver's gem_object_free function from CMA helpers.

VC4 wraps the CMA objects in its own structures, so it needs to do its
own teardown (waiting for GPU to finish, updating bo_stats tracking).
The other CMA drivers are using drm_gem_cma_free_object as their
gem_free_object, so this should be a no-op for them.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/dp/mst: save vcpi with payloads

This makes it possibly for drivers to find the associated
mst_port by looking at the payload allocation table.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449514552-10236-3-git-send-email-harry.wentland@amd.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/dp/mst: reply with ACK for UP reqs

Currently we reply with NACK to UP requests which might
confuse receivers. We haven't seen any actual issues with
this but should still respond to UP requests correctly.

Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449514552-10236-2-git-send-email-harry.wentland@amd.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Move more framebuffer doc from docbook to kerneldoc

I missed a few paragraphs in the docbook that need to be pulled into
the fbdev vfunc docs.

v2: Spelling fixes from Thierry.

Cc: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449564561-3896-3-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/atomic-helper: Drop unneeded argument from check_pending_encoder

Just a remnant from an old iteration of this patch that I've forgotten
to remove: We only need the encoder to figure out whether it has been
reassigned in this update already or not to figure out whether there's
a conflict or not.

Reported-by: Thierry Reding <thierry.reding@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449564561-3896-2-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/doc: Convert to markdown

DRM Docbook is now Markdown ready. This means its doc is able to
use markdown text on it.

* Documentation/DocBook/drm.tmpl: Contains a table duplicated from
  drivers/gpu/drm/i915/i915_reg.h. This is not needed anymore

* drivers/gpu/drm/drm_modeset_lock.c: had a code example that used
  to look pretty bad on html. Fixed by using proper code markup.

* drivers/gpu/drm/drm_prime.c: Remove spaces between lines to make
  a proper markup list.

* drivers/gpu/drm/i915/i915_reg.h: Altought pandoc supports tables,
  it doesn't support table cell spanning. But we can use fixed-width
  for those special cases.

* include/drm/drm_vma_manager.h: Another code example that should be
  proper indented with four spaces.

v2 (Daniel): Adjust name to gpu.xml due to rename.

v3 (Daniel):
Split out the actual enabling in the Makefile - this way we can merge
the conversion, while just keeping the enabling in a drm-private tree.

Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk> (v1)
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448471279-19748-2-git-send-email-daniel.vetter@ffwll.ch

Merge tag 'drm-intel-next-2015-12-04-1' of git://anongit.freedesktop.org/drm-intel into drm-next

This is the "fix igt basic test set issues" edition.
- more PSR fixes from Rodrigo, getting closer
- tons of fifo underrun fixes from Ville
- runtime pm fixes from Imre, Daniel Stone
- fix SDE interrupt handling properly (Jani Nikula)
- hsw/bdw fdi modeset sequence fixes (Ville)
- "don't register bad VGA connectors and fall over" fixes (Ville)
- more fbc fixes from Paulo
- and a grand total of exactly one feature item: Implement dma-buf/fence based
  cross-driver sync in the i915 pageflip path (Alex Goins)

* tag 'drm-intel-next-2015-12-04-1' of git://anongit.freedesktop.org/drm-intel: (70 commits)
  drm/i915: Update DRIVER_DATE to 20151204
  drm/i915/skl: Add SKL GT4 PCI IDs
  Revert "drm/i915: Extend LRC pinning to cover GPU context writeback"
  drm/i915: Correct the Ref clock value for BXT
  drm/i915: Restore skl_gt3 device info
  drm/i915: Fix RPS pointer passed from wait_ioctl to i915_wait_request
  Revert "drm/i915: Remove superfluous NULL check"
  drm/i915: Clean up device info structure definitions
  drm/i915: Remove superfluous NULL check
  drm/i915: Handle cdclk limits on broadwell.
  i915: wait for fence in prepare_plane_fb
  i915: wait for fence in mmio_flip_work_func
  drm/i915: Extend LRC pinning to cover GPU context writeback
  drm/i915/guc: Clean up locks in GuC
  drm/i915: only recompress FBC after flushing a drawing operation
  drm/i915: get rid of FBC {,de}activation messages
  drm/i915: kill fbc.uncompressed_size
  drm/i915: use a single intel_fbc_work struct
  drm/i915: check for FBC planes in the same place as the pipes
  drm/i915: alloc/free the FBC CFB during enable/disable
  ...

drm/ttm: fix documentation of ttm_bo_reserve

Previously, the comment was inconsistent. EDEADLK is what the ww_mutex
mechanism really returns.

Signed-off-by: Nicolai Hähnle <Nicolai.Haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-vc4-next-2015-12-11' of github.com/anholt/linux into drm-next

This pull request brings in 3D acceleration support for the VC4 GPU.
While there is still performance work to be done (particularly
surrounding RCL generation), the CL submit ABI should be settled and
done now.

* tag 'drm-vc4-next-2015-12-11' of http://github.com/anholt/linux:
  drm/vc4: Add an interface for capturing the GPU state after a hang.
  drm/vc4: Add support for async pageflips.
  drm/vc4: Add support for drawing 3D frames.
  drm/vc4: Bind and initialize the V3D engine.
  drm/vc4: Fix a typo in a V3D debug register.
  drm/vc4: Add an API for creating GPU shaders in GEM BOs.
  drm/vc4: Add create and map BO ioctls.
  drm/vc4: Add a BO cache.
  drm: Create a driver hook for allocating GEM object structs.

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

- Support runtime pm
  . In case of most ARM SoC, each IP has each power domain which should be
    controlled by each IP driver using runtime pm interface. So this patch
    series makes each IP driver to control its own power domain when
    drm dpms is requested.
- Support of_graph based dt binding for DP panel.
  . This patch series adds of_graph based dt binding for DP panel.
    And also it keeps backward compatibility. This includes dt binding
    patch so I got Acked-by from Krzysztof Kozlowski who is a Exynos
    SoC maintainer and from Rob Herring who is a device tree maintainer.

- Cleanup for Exynos DRM IPP enhancement.
  . This patch series is a first step for enhancing existing IPP framework
    which will integrate existing IPP functions with DRM KMS part so that
    these can be transparent to userspace. For other portion of the patch
    series, we will have more times for the review.]

* 'exynos-drm-next' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos: (29 commits)
  drm/exynos: gem: remove old unused prototypes
  drm/exynos: fimd: fix dma burst size setting for small plane size
  drm/exynos: fix clipping when scaling is enabled
  drm/exynos: mixer: use ratio precalculated in exynos_state
  drm/exynos: add generic check for plane state
  drm/exynos: introduce exynos_drm_plane_config structure
  drm/exynos: mixer: enable video overlay plane only when VP is available
  drm/exynos: mixer: use crtc->state->adjusted_mode instead of crtc->mode
  drm/exynos: introduce exynos_drm_plane_state structure
  drm/exynos: move dma_addr attribute from exynos plane to exynos fb
  drm/exynos: exynos7-decon: remove excessive check
  drm/exynos: rotator: convert to common clock framework
  drm/exynos: gsc: add device tree support and remove usage of static mappings
  drm/exynos: gsc: fix wrong pm_runtime state
  drm/exynos: gsc: prepare and unprepare gsc clock
  ARM: dts: Use OF graph for DP to panel connection in exynos5800-peach-pi
  dt-bindings: exynos-dp: update ports node binding for panel
  drm/exynos: dp: add of_graph dt binding support for panel
  drm/exynos: decon: remove unused variables
  drm/exynos: dsi: modify a error type when getting a node failed
  ...

Merge tag 'topic/drm-misc-2015-12-14' of git://anongit.freedesktop.org/drm-intel into drm-next

Last (very likely at least) drm-misc pull for 4.5. 3 big things:
- piles of docs for kms vtables.
- drm.debug dmesg output prettification from Ville (i915 parts are for 4.6
  I think)
- connector mode probing/validating/merging cleanup from Ville.

[airlied : fix drm_encoder_init conflict.]

* tag 'topic/drm-misc-2015-12-14' of git://anongit.freedesktop.org/drm-intel: (43 commits)
  drm: modes: Revert cc344980c767 "replace simple_strtoul by kstrtouint"
  drm: Expand the drm_helper_probe_single_connector_modes() docs
  drm: Allow override_edid to override the firmware EDID
  drm/sti: Drop bogus drm_mode_sort() call
  drm: Drop drm_helper_probe_single_connector_modes_nomerge()
  drm: Only merge mode type bits between new probed modes
  drm: Flatten drm_mode_connector_list_update() a bit
  drm: Rename MODE_UNVERIFIED to MODE_STALE
  drm: Don't overwrite UNVERFIED mode status to OK
  drm: Add plane->name and use it in debug prints
  drm: Add crtc->name and use it in debug messages
  drm: Use driver specified encoder name
  drm: Pass 'name' to drm_encoder_init()
  drm: Pass 'name' to drm_universal_plane_init()
  drm: Pass 'name' to drm_crtc_init_with_planes()
  drm: Documentation style guide
  drm: Document drm_encoder/crtc_helper_funcs
  drm: Move drm_display_mode an related docs into kerneldoc
  drm/atomic-helper: Mention the new system/resume helpers the docs
  drm: Document drm_connector_helper_funcs
  ...

Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next

Main thing this time around is DSI support for msm8960/apq8064, which
should be helpful for getting an upstream kernel working on
nexus7/nexus4/etc.

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (29 commits)
  drm/msm/mdp: fix a problematic usage of WARN_ON()
  drm/msm/dsi: Added missing mutex_unlock
  drm/msm: ratelimit error irq msgs
  drm/msm: Use unlocked gem unreferencing
  drm/msm: trivial whitespace fix
  dt-bindings: msm/dsi: Add DSIv2 documentation
  dt-bindings: msm/dsi: Fix the order in which clocks are listed
  drm/msm/dsi: Enable MMSS SPFB port via syscon
  drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2
  drm/msm/dsi: Add dsi_cfg for APQ8064
  drm/msm/dsi: Set up link clocks for DSIv2
  drm/msm/dsi: Parse bus clocks from a list
  drm/msm/dsi: Delay dsi_clk_init
  drm/msm/dsi: Use a better way to figure out DSI version
  drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY
  drm/msm/dsi: Add support for 28nm PHY on 8960
  drm/msm/dsi: Don't get byte/pixel source clocks from DT
  drm/msm/mdp4: Initialize DSI encoders
  drm/msm/mdp4: Call custom round_pixclk helper only if the encoder type is TMDS
  drm/msm/dsi: Add a mdp4 encoder for DSI
  ...

drm/msm/mdp: fix a problematic usage of WARN_ON()

WARN_ON() takes a condition rather than a format string. This patch
converted WARN_ON() to WARN() instead.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Added missing mutex_unlock

in case of failed to get iova, function was returning without releasing
the mutex. Added it.

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: ratelimit error irq msgs

When things go bad and don't recover, we can be getting an err irq every
vblank.

Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Use unlocked gem unreferencing

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: trivial whitespace fix

Signed-off-by: Rob Clark <robdclark@gmail.com>

dt-bindings: msm/dsi: Add DSIv2 documentation

Add additional property info needed for DSIv2 DT.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

dt-bindings: msm/dsi: Fix the order in which clocks are listed

List the clocks in the order that's used in DT. We don't have mdp/dsi
DT nodes for any SoC in upstream yet, but we align with the order
we intend to use.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Enable MMSS SPFB port via syscon

For DSIv2 to work, we need to enable MMSS_AHB_ARB_MASTER_PORT in
MMSS_SFPB. We enable the required bitfield by retrieving MMSS_SFPB
regmap pointer via syscon.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2

We currently use iommu allocated DMA buffers for sending DSI commands.
DSIv2 doesn't have a port connected to the MDP iommu. Therefore, it
can't use iommu allocated buffers to fetch DSI commands.

Use a regular contiguous DMA buffer if we are DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Add dsi_cfg for APQ8064

Add a dsi_cfg entry for APQ8064. Since this is the first DSIv2 chip to
be supported, add a list of bus clocks that are required by the DSIv2
block.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Set up link clocks for DSIv2

DSIv2 (DSI on older A family chips) has slightly different link clock
requirements.

First, we have an extra clock called src_clk (with a dedicated RCG).
This is required by the DSI controller to process the pixel data
coming from MDP. It needs to be set at the rate "pclk * bytes_per_pixel".

We also need to explicitly configure esc_clk. On DSI6G chips, we don't
need to set a rate to esc_clk because its RCG is always sourced from
crystal clock (19.2 Mhz in all cases), which is within the escape clock
frequency range in the mipi DSI spec. For chips with DSIv2, the crystal
clock rate may not be within the required range (27Mhz on APQ8064).
Therefore, we derive it from the DSI byte clock. We calculate an esc_clck
rate that is within the mipi spec and also divisible by the byte clock
rate.

When setting rate and enabling the link clocks, we make sure that byte_clk
is configured before esc_clk, and src_clk before pixel_clk. We create two
different link_enable funcs for DSI6G and DSIv2 since the sequences are
different.

We also obtain two extra source clocks (dsi_src_clk and esc_src_clk) and
set their parent to the clocks provided by DSI PLL.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Parse bus clocks from a list

DSI bus clocks seem to vary between different DSI host versions, and the
SOC to which they belong. Even the enable/disable sequence varies.

Provide a list of bus clock names in dsi_cfg. The driver will use this to
retrieve the clocks, and enable/disable them.

Add bus clock lists for DSI6G, and DSI for MSM8916(this is DSI6G too, but
there is no MMSS_CC specific clock since there is no MMSS clock controller
on 8916).

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Delay dsi_clk_init

Initialize clocks only after we get the DSI host version. This will allow
us to get clocks using a pre-defined list based on the DSI major/minor
version of the host. This is required since clock requirements of
different major DSI revisions(v2 vs 6g) aren't the same.

Modify dsi_get_version to get the interface clock, and then put it after
it is used.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Use a better way to figure out DSI version

The current version checking mechanism works fine for DSI6G blocks. It
doesn't work so well for older generation DSIv2 blocks.

The initial read of REG_DSI_6G_HW_VERSION(offset 0x0) would result in a
read of REG_DSI_CTRL for DSIv2. This register won't necessarily be 0 on
DSIv2. It can be non zero if DSI was previously initialized by the
bootloader.

Instead of reading offset 0x0, we now read offset 0x1f0. For DSIv2, this
register is DSI_VERSION, and is bound to be non-zero. On DSI6G, this
register(offset 0x1f0) is SCRATCH_REGISTER_0, which no one ever seems to
touch, and from all register dumps I'vc seen, holds 0 all the time.

Modify dsi_get_version to read REG_DSI_VERSION to determine whether we
are DSI6G or DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

Add DSI PLL common clock framework clocks for 8960 PHY.

The PLL here is different from the ones found in B family msm chips. As
before, the DSI provides two clocks to the outside world. dsixpll and
dsixpllbyte (x = 1, 2). dsixpll is a regular clock divider, but
dsixpllbyte is modelled as a custom clock divider.

dsixpllbyte is the starting point of the PLL configuration. It is the
one that sets up the VCO clock rate. We need the VCO clock rate in the
form: F * byteclk, where F is a multiplication factor that varies on
the byte clock the DSI driver is trying to set. We use the custom
clk_ops for dsixpllbyte to ensure that the parent (VCO) is set at this
rate.

An additional divider (POSTDIV1) generates the bitclk. Since bit clock
can be derived from byteclock, we calculate it internally, and don't
expose it as a clock.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Add support for 28nm PHY on 8960

DSI PHY on MSM8960 and APQ8064 is a 28nm PHY that's different from the
supported 28nm LP PHY found in newer chips.

Add support for the new PHY.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Don't get byte/pixel source clocks from DT

We retrieve the byte and pixel source clocks (RCG clocks) in the dsi
driver via DT. These are needed so that we can re-parent these source
clocks if we want to drive it using a different DSI PLL.

We shouldn't get these via DT because they aren't clocks that directly
serve as inputs to the dsi host.

Fortunately, there is a static parent-child link between the
byte_clk_src/pixel_clk_src and byte_clk/pixel_clk clocks. So, we can
retrieve the source clocks via clk_get_parent.

Do this instead of retrieving via DT.

Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/mdp4: Initialize DSI encoders

Create DSI encoders during modeset_init. The 2 encoders should ideally be
one command mode and one video mode DSI encoder respectively, but we don't
support command mode yet. We just create 2 of the same because the dsi
driver expects it, we end up using only the first one.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/mdp4: Call custom round_pixclk helper only if the encoder type is TMDS

The mdp_kms round_pixclk op creates problems when we have more
interfaces in use. It calls the DTV encoder's helper by default.

Check on encoder type and call the corresponding encoder's
func meant for rounding pixel clock. DSI and LVDS don't require
rounding, so just return rate in their case.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Add a mdp4 encoder for DSI

Create an mdp4 incoder for DSI. Only DSI video mode is supported as of
now.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Vinay Simha BN <vinaysimha@inforcecomputing.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/mdp4: Initialize LCDC encoder even if panel driver isn't available

Currently, the driver defers if it doesn't find a drm_panel. This forces
us to have a drm_panel, if not, the driver isn't usable.

Make the lcdc encoder initialization independent of the availability of
the drm panel. We only check if there is a panel node specified in DT. If
it isn't, then we don't initialize the encoder at all. The panel node is
passed to the lcdc encoder and lvds connector drivers.

The connector driver takes the responsibility to retrieve the drm_panel
from the panel node, and update the status on whether the panel is
connected or not. This makes the panel usable even if the drm_panel
driver is inserted as a module later on.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/mdp4: Clean up modeset_init

modeset_init() for mdp4 isn't very flexible. That makes it hard to add
more interfaces.

Split out the encoder/connector creation code in modeset_init into a
separate function. This is similar to what's done in modeset_init for
mdp5.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/adreno: Remove CONFIG_OF checks

Remove CONFIG_OF checks in adreno_device.c. The downstream bus scaling
stuff is included only when CONFIG_OF is not set. So, remove that too.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/hdmi: remove CONFIG_OF checks

We now only care about kernels that support DT. Remote the non-DT stuff.
While we're at it, use of_device_get_match_data to retrieve match data.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/mdp: Remove CONFIG_OF checks from MDP drivers

We don't intend to use downstream non-DT kernels anymore, so remove
CONFIG_OF checks.

Update the TODO comment so that we don't forget about max_clk setting
for non APQ8064 chips having MDP4.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

dt-bindings: drm/msm: Update MDP bindings

Update DT bindings for mdp. We now have a more uniform and future-proof
set of compatible strings.

MDP5 bindings were missing. Add those and update details on the
clock-names properties.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Update compatible strings for mdp

Create distinct compatible strings for mdp4 and mdp5. Keep "qcom,mdss_mdp"
as is to support downstream kernels.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Remove non-DT code in msm_drv

Support for non-DT kernels was mainly to use v3.4 downstream kernels.
This is no longer a priority now as we have reasonable support upstream.

Remove CONFIG_OF from the top level msm_drv.c file. While we're at it,
clean up the data matching process using of_device_get_match_data.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/mdp5: high precision vblank timestamp support

MDP5 has line count and frame count registers for each interface. Enable
these counters and use them to implement the get_vblank_timestamp drm
driver op.

The line counter starts with the value 1 at the beginning of the VSYNC
pulse and ends with value VTOTAL at the end of VFP. This value is used
to determine whether we're in blanking period or not, and an adjusted
value of this counter is used to get vpos as expected by
get_scanout_position. Since there is no way to calculate hpos, we always
set it to 0.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/tegra: Advertise DRIVER_ATOMIC

The driver has supported atomic mode-setting for quite a while. It's
time to advertise that.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: Use DRIVER level for IOMMU aperture message

This allows the message to be shown even if core messages are disabled
globally in DRM.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: checking for IS_ERR() instead of NULL

The tegra_sor_hdmi_find_settings() function returns NULL on error and
not an ERR_PTR.

Fixes: 459cc2c6800b ('drm/tegra: sor: Add HDMI support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: dc: Add missing of_node_put()

for_each_matching_node() performs an of_node_get() on each iteration, so
a break out of the loop requires an of_node_put().

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e;
@@

 for_each_matching_node(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: Implement subsystem-level suspend/resume

Use the drm_atomic_helper_suspend() and drm_atomic_helper_resume()
helpers to implement subsystem-level suspend/resume.

v2: suspend framebuffer device to avoid concurrency issues
v3: resume fbdev on failure to suspend (Emil Velikov)

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: sor: Remove unnecessary conditional

Checking for sor->aux in eDP specific code is unnecessary because eDP
inherently requires a valid AUX channel.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: sor: Operate on struct drm_dp_aux *

Instead of getting a pointer to the driver-specific wrapper of AUX
channels, use the AUX channel objects directly to avoid hackish casting
between the two types.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: Use drm_gem_object_unreference_unlocked()

This only grabs the mutex when really needed, but still has a might-
acquire lockdep check to make sure that's always possible. With this
patch Tegra DRM is officially struct_mutex free, yay!

v2: refernce_unlocked doesn't exist as kbuild spotted.

Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[treding@nvidia.com: remove unused variables]
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: Don't take dev->struct_mutex in mmap offset ioctl

Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).

v2: Finally get rid of the copypasta from another commit in this
commit message. And convert to _unlocked like we need to (Patrik).

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: Use unlocked gem unreferencing

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>