drm: Move master pointer from drm_minor to drm_device

There can only be one current master, and it's for the overall device.
Render/control minors don't support master-based auth at all.

This simplifies the master logic a lot, at least in my eyes: All these
additional pointer chases are just confusing.

While doing the conversion I spotted some locking fail:
- drm_lock/drm_auth check dev->master without holding the
  master_mutex. This is fallout from

  commit c996fd0b956450563454e7ccc97a82ca31f9d043
  Author: Thomas Hellstrom <thellstrom@vmware.com>
  Date:   Tue Feb 25 19:57:44 2014 +0100

      drm: Protect the master management with a drm_device::master_mutex v3

  but I honestly don't care one bit about those old legacy drivers
  using this.

- debugfs name info should just grab master_mutex.

- And the fbdev helper looked at it to figure out whether someone is
  using KMS. We just need a consistent value, so READ_ONCE. Aside: We
  should probably check if anyone has opened a control node too, but I
  guess current userspace doesn't really do that yet.

v2: Balance locking, reported by Julia.

v3: Rebase on top of Chris' oops fixes.

Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-1-git-send-email-daniel.vetter@ffwll.ch

drm: sti: rework init sequence

Use drm_dev_alloc() and drm_dev_register() instead of .load()
To simplify init sequence only create fbdev when requested
in output_poll_changed().

version 2:
remove call to drm_connector_unregister_all() and
drm_dev_set_unique()

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466514580-15194-4-git-send-email-benjamin.gaignard@linaro.org

drm: sti: use late_register and early_unregister callbacks

Make sti driver use register callback to move debugfs
initialization out of sub-components creation.
This will allow to convert driver .load() to
drm_dev_alloc() and drm_dev_register().

sti_compositor bring up 2 crtc but only one debugfs init is
needed so use drm_crtc_index to do it on the first one.
This can't be done in sti_drv because only sti_compositor have
access to the devices.
It is almost the same for sti_encoder which handle multiple
encoder while one only debugfs entry is needed so add a boolean
to avoid multiple debugfs initialization

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466514580-15194-3-git-send-email-benjamin.gaignard@linaro.org

drm/amdkfd: Clean up inline handling

- inline functions need to be static inline, otherwise gcc can opt to
  not inline and the linker gets unhappy.
- no forward decls for inline functions, just include the right headers.

Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Ben Goz <ben.goz@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466500235-21282-2-git-send-email-daniel.vetter@ffwll.ch

drm: Add callbacks for late registering

Like what has been done for connectors add callbacks on encoder,
crtc and plane to let driver do actions after drm device registration.

Correspondingly, add callbacks called before unregister drm device.

version 2:
add drm_modeset_register_all() and drm_modeset_unregister_all()
to centralize all calls

version 3:
in error case unwind registers in drm_modeset_register_all
fix uninitialed return value
inverse order of unregistration in drm_modeset_unregister_all

version 4:
move function definitions in drm_crtc_internal.h
remove not needed documentation

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466519829-4000-1-git-send-email-benjamin.gaignard@linaro.org

drm/fsl-dcu: use drm_mode_config_cleanup on initialization errors

Commit 7566e247672d ("drm/fsl-dcu: handle initialization errors properly")
introduced error handling during initialization, but with a wrong cleanup
order.

Replace the error handling with the generic cleanup function
drm_mode_config_cleanup.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160619021543.23587-1-stefan@agner.ch

drm/mediatek: Remove IOMMU_DMA select

We get a harmless build warning when trying to use the mediatek DRM
driver with IOMMU support disabled:

warning: (DRM_MEDIATEK) selects IOMMU_DMA which has unmet direct dependencies (IOMMU_SUPPORT)

However, the IOMMU_DMA symbol is not meant to be used by drivers at all,
and this driver doesn't seem to have a strict dependency on it other
than using the mediatek IOMMU driver that does.

Since we also want to be able to do compile tests with the driver on
other platforms, the IOMMU_DMA symbol should not be selected here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462997501-982363-1-git-send-email-arnd@arndb.de

Documentation/DocBook: remove gpu.tmpl

The gpu documentation has now been converted to reStructuredText files
under Documentation/gpu. Remove the obsolete DocBook template. Also
remove it from MAINTAINERS.

Good riddance.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8d673f75fe686371ed9838682c368a4e3b96bf54.1466506505.git.jani.nikula@intel.com

Documentation/gpu: split up mm, kms and kms-helpers from internals

Make the documents more manageable.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/be992e56eb8442d6e03b52444df5a42525085718.1466506505.git.jani.nikula@intel.com

Documentation/gpu: convert the KMS properties table to CSV

Pandoc really did a bad job of converting the big KMS properties table
to RST. Instead, put the properties into a separate plain text CSV file,
and include it in the RST file. The generated output isn't very pretty,
but at least the information is there, and it's stored in a format
that's easier to process and improve upon at a later time.

The CSV file was generated by copy-pasting the table from the HTML
generated by the DocBook toolchain into LibreOffice Calc, and then saved
as CSV, unmodified.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/17053ff08caf5cfac4f478437ef796f83a31d772.1466506505.git.jani.nikula@intel.com

Documentation/gpu: use recommended order of heading markers

While splitting the document up, the headings "shifted" from what pandoc
generated. Use the following order for headings for consistency:

==============
Document title
==============

First
=====

Second
------

Third
~~~~~

Leave the lower level headings as they are; I think those are less
important. Although RST doesn't mandate a specific order ("Rather than
imposing a fixed number and order of section title adornment styles, the
order enforced will be the order as encountered."), having the higher
levels the same overall makes it easier to follow the documents.

[I'm sort of kind of writing the recommendation for docs-next in the
mean time, but this order seems sensible, and is what I'm proposing.]

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/126f42734defac6cbb8496a481d58db7b38461dd.1466506505.git.jani.nikula@intel.com

MAINTAINERS: add Documentation/gpu and Documentation/gpu/i915.rst

We'll want to keep an eye on what's going on in these files.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/4d409e09c475cc0bdf7a0312e30c0d3f8d535fc5.1466506505.git.jani.nikula@intel.com

Documentation/gpu: split up the gpu documentation

Make the gpu documentation easier to manage by splitting to separate
files. Again, this is just the split, no real edits.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/bd2b599b5105c28c8f05923005e6cc9b7efa7fc1.1466506505.git.jani.nikula@intel.com

Documentation/gpu: add new gpu.rst converted from DocBook gpu.tmpl

This is the first step towards converting the DocBook gpu.tmpl to Sphinx
and reStructuredText, the new kernel documentation tool and markup.

Use Jon's "cheesy conversion script" in Documentation/sphinx/tmplcvt to
do the rough conversion. Do the manual edits in follow-up patches. Add a
new Documentation/gpu directories for the graphics related
documentation. (Hooray, now we can have directories based on topics
rather than tools under Documentation.)

We also won't remove the DocBook gpu.tmpl yet so it's easier to build
both and compare the results for parity.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/bc7b4f9ac037632e0c8469c079d21fad5eaa39a0.1466506505.git.jani.nikula@intel.com

drm/crtc-helper: disable_unused_functions really isn't for atomic

Rockchip just blew up here on testing, because I removed some "is this
crtc already disabled/enabled" state tracking from callbacks (not needed
with atomic). Turns out that was needed to work around rockchip still
calling legacy helper code.

Since me explaining on irc/mailing-list plus kerneldoc isn't enough,
be more verbose and add dmesg output. Not that anyone actually reads that,
either.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-26-git-send-email-daniel.vetter@ffwll.ch

drm/rcar-du: Remove redundant calls to drm_connector_register_all()

Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-8-git-send-email-chris@chris-wilson.co.uk

drm/msm: Remove redundant calls to drm_connector_register_all()

Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-7-git-send-email-chris@chris-wilson.co.uk

drm/mediatek: Remove redundant calls to drm_connector_register_all()

Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-6-git-send-email-chris@chris-wilson.co.uk

drm/hisilicon: Remove redundant calls to drm_connector_register_all()

Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-5-git-send-email-chris@chris-wilson.co.uk

drm/atmel-hlcdc: Remove redundant calls to drm_connector_register_all()

Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-4-git-send-email-chris@chris-wilson.co.uk

drm/arc: Remove redundant calls to drm_connector_register_all()

Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-3-git-send-email-chris@chris-wilson.co.uk

drm/rockchip: Finish initialization before registering DRM device

Currently the driver calls drm_dev_register() directly after allocating
the DRM device and then continues with further initialization. This is
incorrect, because drm_dev_register() is supposed to be called after all
initialization is done. This problem was masked by the fact that
drm_dev_register() did not use to do anything special before, but
recently it started to call drm_connector_register_all(), which leads to
a crash if the driver is not fully initialized.

This patch fixes the problem by moving the call to drm_dev_register() to
the end of the initialization sequence and also removing the, now
unnecessary, call to drm_connector_register_all() from driver code.

Fixes: f706974a69b6 ("drm/rockchip: Drop drm_driver.load/unload callbacks")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
[danvet: Fix up cleanup labels a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466483254-35373-1-git-send-email-tfiga@chromium.org

drm/omapdrm: don't call drm_helper_disable_unused_functions

It's a legacy helper function which won't do good with atomic helpers.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465510479-21180-1-git-send-email-daniel.vetter@ffwll.ch

drm: Mark set/drop master ioctl as unlocked.

Again this is neatly protected by the dev->master_mutex now. There is
a driver callback both for set and drop, but it's only used by vmwgfx.
And vmwgfx has it's own solid locking for shared resources (besides
dev->master_mutex), hence is all safe. Let's drop another place where
the drm legacy bkl is used.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-6-git-send-email-daniel.vetter@ffwll.ch

drm: Mark authmagic ioctls as unlocked

All protected by dev->master_mutex. And there's no driver callbacks,
which means no need to sync with old dri1 horror show drivers at all.
Hence safe to drop the drm legacy BKL from these paths.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-5-git-send-email-daniel.vetter@ffwll.ch

drm: Protect authmagic with master_mutex

Simplifies cleanup, and there's no reason drivers should ever care
about authmagic at all - it's all handled in the core.

And with that, Ladies and Gentlemen, it's time to pop the champagen
and celebrate: dev->struct_mutex is now officially gone from modern
drivers, and if a driver is using gem_free_object_unlocked and doesn't
do anything else silly it's positively impossible to ever touch
dev->struct_mutex at runtime, anywhere.

Well except for the mutex_init on driver load ;-)

v2: Rebased.

Cc: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-4-git-send-email-daniel.vetter@ffwll.ch

drm: Move authmagic cleanup into drm_master_release

It's related, and soon authmagic will also use the master_mutex.

There is an ever-so-slightly semantic change here:
- authmagic will only be cleaned up for primary_client drm_minors. But
  it's impossible to create authmagic on render/control nodes, so this
  is fine.
- The cleanup is moved down a bit in the release processing. Doesn't
  matter at all since authmagic is purely internal logic used by the
  core ioctl access checks, and when we're in a file's release
  callback no one can do ioctls any more.

v2: Rebased.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-3-git-send-email-daniel.vetter@ffwll.ch

drm: Only do the hw.lock cleanup in master_relase for !MODESET

Another place gone where modern drivers could have hit
dev->struct_mutex.

To avoid too deeply nesting control flow rework it a bit.

v2: Review from Chris:
- remove spurious newline.
- fix file_priv->master like for the !file_priv->is_master case.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-2-git-send-email-daniel.vetter@ffwll.ch

drm: Prevent NULL deref in drm_name_info()

If a driver does not have a parent, or never sets the unique name for
itself, then we may proceed to chase a NULL dereference through
debugfs/.../name.

Testcase: igt/vgem_basic/debugfs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466448813-23340-1-git-send-email-chris@chris-wilson.co.uk

drm: fix send_vblank_event use-after-free error

The drm_pending_event can be freed by drm_send_event_locked, as a
result we should call trace_drm_vblank_event_delivered before this
to avoid hitting a user-after-free error when accessing the pid member:

[  378.438497] BUG: KASAN: use-after-free in send_vblank_event+0xf0/0x310 [drm] at addr ffff8801ac7e50a0
[  378.438500] Read of size 4 by task Xorg/1562
[  378.438501] =============================================================================
[  378.438504] BUG kmalloc-128 (Tainted: G    B          ): kasan: bad access detected
[  378.438506] -----------------------------------------------------------------------------

[  378.438509] INFO: Freed in 0x10001309c age=18446737369265680575 cpu=0 pid=0
[  378.438541]  drm_send_event_locked+0x207/0x2f0 [drm]
[  378.438544]  __slab_free+0x24c/0x650
[  378.438546]  kfree+0x3a2/0x760
[  378.438578]  drm_send_event_locked+0x207/0x2f0 [drm]
[  378.438610]  send_vblank_event+0xb7/0x310 [drm]
[  378.438643]  drm_crtc_send_vblank_event+0x130/0x1f0 [drm]
[  378.438722]  intel_atomic_commit_tail+0x23b5/0x53f0 [i915]
[  378.438802]  intel_atomic_commit+0xbae/0x12f0 [i915]
[  378.438839]  drm_atomic_commit+0xb0/0x120 [drm]
[  378.438855]  drm_atomic_helper_connector_dpms+0x339/0x5d0 [drm_kms_helper]
[  378.438891]  drm_mode_obj_set_property_ioctl+0x8f1/0xcc0 [drm]
[  378.438927]  drm_mode_connector_property_set_ioctl+0xf3/0x170 [drm]
[  378.438959]  drm_ioctl+0x2d7/0xae0 [drm]
[  378.438962]  do_vfs_ioctl+0x1c9/0x1280
[  378.438964]  SyS_ioctl+0x79/0x90
[  378.438967]  entry_SYSCALL_64_fastpath+0x1a/0xa4

Cc: dri-devel@lists.freedesktop.org
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466440966-5410-1-git-send-email-matthew.auld@intel.com

dma-buf: remove dma_buf_debugfs_create_file()

There is only a single user of dma_buf_debugfs_create_file() and that
one got the function pointer cast wrong. With that one fixed, there is
no need to have a wrapper for debugfs_create_file(), just call it
directly.

With no users left, we can remove dma_buf_debugfs_create_file().

While at it, simplify the error handling in dma_buf_init_debugfs()
slightly.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1466339491-12639-2-git-send-email-minipli@googlemail.com

dma-buf: remove dma_buf directory on bufinfo file creation errors

Change the error handling in dma_buf_init_debugfs() to remove the
"dma_buf" directory if creating the "bufinfo" file fails. No need to
have an empty debugfs directory around.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

dma-buf: propagate errors from dma_buf_describe() on debugfs read

The callback function dma_buf_describe() returns an int not void so the
function pointer cast in dma_buf_show() is wrong. dma_buf_describe() can
also fail when acquiring the mutex gets interrupted so always returning
0 in dma_buf_show() is wrong, too.

Fix both issues by avoiding the indirection via dma_buf_show() and call
dma_buf_describe() directly. Rename it to dma_buf_debug_show() to get it
in line with the other functions.

This type mismatch was caught by the PaX RAP plugin.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

drm/i915: Avoid use-after-free of intel_encoder in intel_dp_connector_destrpy

The drm_dp_aux is associated with the intel_dp encoder and not the
connector. Since the encoder is destroyed before the connector,
attempting to free the drm_dp_aux from inside the connector cleanup
causes a use-after-free.

This was applied to the patch that CI was happy with, but in the
confusion of so many series trying to make CI happy, the unready
patch was plucked.

Fixes: c191eca110a3 ("drm/i915: Move intel_connector->unregister to connector->early_unregister")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466411357-730-1-git-send-email-chris@chris-wilson.co.uk

drm/i915: Move backlight unregistration to connector unregistration

Currently the backlight is being unregistered in the unload phase (after
the display and its objects are unregistered). Move the backlight
unregistration into the analogous phase by performing it from the
connector unregistration, just prior to its deletion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466160034-12173-3-git-send-email-chris@chris-wilson.co.uk

drm/i915: Move intel_connector->unregister to connector->early_unregister

We now have a connector->func that serves the same purpose as our own
intel_connector->unregister vfunc allowing us to unwrap ourselves and
use drm_connector_register() (and friends) as the central function.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466160034-12173-2-git-send-email-chris@chris-wilson.co.uk

drm: Protect drm_connector_register_all() under DRIVER_MODESET

0-day kbuilder found

[    1.360244] BUG: unable to handle kernel NULL pointer dereference at   (null)
[    1.360972] IP: [<c14db9ad>] mutex_lock_nested+0x11f/0x2c3
[    1.361512] *pde = 00000000
[    1.361827] Oops: 0002 [#1]
[    1.362123] Modules linked in:
[    1.362451] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc2-00564-ge28cd4d #1
[    1.363202] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    1.364105] task: c03d0000 ti: d28da000 task.ti: d28da000
[    1.364636] EIP: 0060:[<c14db9ad>] EFLAGS: 00210096 CPU: 0
[    1.365215] EIP is at mutex_lock_nested+0x11f/0x2c3
[    1.365703] EAX: 00000000 EBX: d39e8ae8 ECX: d39e8b14 EDX: c1361cf9
[    1.366351] ESI: c03d0000 EDI: d28dbed0 EBP: d28dbeec ESP: d28dbec0
[    1.367010]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[    1.367534] CR0: 80050033 CR2: 00000000 CR3: 019a9000 CR4: 00000690
[    1.368152] Stack:
[    1.368356]  d39e8b14 d39e8b24 c1361cf9 00200246 d39e8b14 00000000 11111111 d28dbed0
[    1.369235]  d39e8800 d39e8ae8 00000000 d28dbf08 c1361cf9 d28dbf0c c10b25be d39e8800
[    1.370087]  00000000 00000000 d28dbf1c c135e37d fffffff4 ffffffff 00000000 d28dbf28
[    1.371012] Call Trace:
[    1.371272]  [<c1361cf9>] ? drm_connector_register_all+0x1a/0x92
[    1.371847]  [<c1361cf9>] drm_connector_register_all+0x1a/0x92
[    1.372421]  [<c10b25be>] ? kstrdup+0x25/0x3a
[    1.372863]  [<c135e37d>] drm_dev_register+0x59/0x99
[    1.373358]  [<c195ea3e>] vgem_init+0x34/0x49
[    1.373770]  [<c195ea0a>] ? mipi_dsi_bus_init+0xf/0xf
[    1.374257]  [<c100048f>] do_one_initcall+0x7c/0xfd
[    1.374754]  [<c104b409>] ? parse_args+0x1fd/0x314
[    1.375259]  [<c1939c10>] ? kernel_init_freeable+0xd0/0x179
[    1.375837]  [<c1939c2c>] kernel_init_freeable+0xec/0x179
[    1.376371]  [<c14d66ea>] kernel_init+0x8/0xcb
[    1.376806]  [<c14debce>] ret_from_kernel_thread+0xe/0x30
[    1.377322]  [<c14d66e2>] ? rest_init+0x10e/0x10e
[    1.377754] Code: 89 fa e8 71 c5 b7 ff 8b 4e 04 89 fa 89 d8 e8 8e c6 b7 ff 8d 43 2c 89 45 d4 8b 43 30 8d 4b 2c 89 45 e8 89 7b 30 89 4d e4 8b 55 dc <89> 38 8d 43 3c 89 75 ec e8 c9 dd b7 ff eb 0c 31 c0 87 03 48
+75
[    1.380442] EIP: [<c14db9ad>] mutex_lock_nested+0x11f/0x2c3 SS:ESP 0068:d28dbec0
[    1.381174] CR2: 0000000000000000

when loading the non-modesetting vGEM module. To prevent use of the
uninitialised dev->mode_config from drm_dev_register() we move the
drm_connector_register_all() under a DRIVER_MODESET guard. Longer term,
we probably want to initialise the embedded dev->mode_config automatically
from drm_dev_init() for all DRIVER_MODESET drivers.

v2: Also protect drm_dev_unregister.

Fixes: e28cd4d0a223 ("drm: Automatically register/unregister all connectors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Testcase: igt/vgem_reload_basic
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466257601-5656-1-git-send-email-chris@chris-wilson.co.uk

drm: Deal with rotation in drm_plane_helper_check_update()

drm_plane_helper_check_update() needs to account for the plane rotation
for correct clipping/scaling calculations. Do so.

There was an earlier attempt [1] to add this into
intel_check_primary_plane() but I requested that it'd be put into the
helper instead. An updated patch never materialized AFAICS, so I went
ahead and cooked one up myself.

v2: Deal with new drm_plane_helper_check_update() callers

[1] https://patchwork.freedesktop.org/patch/65177/
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466172790-10025-1-git-send-email-ville.syrjala@linux.intel.com

drm: Automatically register/unregister all connectors

As the drm_connector is now safe for multiple calls to
register/unregister, automatically perform a registration on all known
connectors drm drv_register (and unregister from drm_drv_unregister).
Drivers can still call drm_connector_register() and
drm_connector_unregister() individually, or defer as required.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-2-git-send-email-chris@chris-wilson.co.uk

drm: Minimally initialise drm_dp_aux

When trying to split up the initialisation phase and the registration
phase, one immediate problem encountered is trying to use our own i2c
devices before registration with userspace (to read EDID during device
discovery). drm_dp_aux in particular only offers an interface for setting
up the device *after* we have exposed the connector via sysfs. In order
to break the chicken-and-egg problem, export drm_dp_aux_init() to
minimally prepare the i2c device for internal use before
drm_connector_register().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
[danvet: Amend kerneldoc slightly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466152398-20157-3-git-send-email-chris@chris-wilson.co.uk

drm: Pass the drm_dp_aux->hw_mutex to i2c for its locking

Rather than have both drm_dp_aux lock within its transfer, and i2c to
lock around the transfer, use the same lock by filling in the locking
callbacks that i2c wants to use. We require our own hw_mutex as we
bypass i2c_transfer for drm_dp_dpcd_access().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466152398-20157-2-git-send-email-chris@chris-wilson.co.uk

drm/sti: Don't call drm_helper_disable_unused_functions

Atomic drivers are supposed to do hw/sw state reset with the
drm_mode_config_reset() call right above it.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-38-git-send-email-daniel.vetter@ffwll.ch

drm: Automatically unregister the connector during cleanup

As we now can call drm_connector_unregister() multiple times, provide a
failsafe unregister for a connector when cleaning it up.

v2: Add a WARN to catch any connectors that are still visible to
userspace when we come to destoy them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-5-git-send-email-chris@chris-wilson.co.uk

drm: Make drm_connector_register() safe against multiple calls

Protect against drivers that may try to register the connector more
than once, or who try to unregister it multiple times.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-4-git-send-email-chris@chris-wilson.co.uk

drm: Add a callback from connector registering

If a driver wants to more precisely control its initialisation and in
particular, defer registering its interfaces with userspace until after
everything is setup, it also needs to defer registering the connectors.
As some devices need more work during registration, add a callback so
that drivers can do additional work if required for a connector.

Correspondingly, we also require an unregister callback.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: go ocd and remvoe unecessary empty kerneldoc line.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-3-git-send-email-chris@chris-wilson.co.uk

drm: Export drm_dev_init() for subclassing

In order to allow drivers to pack their privates and drm_device into one
struct (e.g. for subclassing), export the initialisation routines for
struct drm_device.

v2: Missed return ret. That error path had only one job to do!
v3: Cross-referencing drm_dev_init/drm_dev_alloc in kerneldoc, fix
missed error code for goto err_minors.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-2-git-send-email-chris@chris-wilson.co.uk

drm: rockchip: select DRM_GEM_CMA_HELPER

The rockchip drm driver started using drm_gem_cma_vm_ops, but that might
not be part of the kernel, causing the link to fail:

drivers/gpu/built-in.o:(.data+0xb234): undefined reference to `drm_gem_cma_vm_ops'

This adds a Kconfig 'select' statement to enable it like the other
user do.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 80f67cd80add ("drm/rockchip: Use cma gem vm ops")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160616122800.1174015-1-arnd@arndb.de

drm: Extract drm_master_relase

Like with drm_master_open protect it with a check for primary_client
to make it clear that this can't happen on render/control nodes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-7-git-send-email-daniel.vetter@ffwll.ch

drm: Extract drm_master_open

And pull out the primary_client check to make it really obvious that
this can't happen on control/render nodes. Bonus that we can avoid the
master lock in this case.

v2: Don't leak locks on error path (and simplify control flow while
at it), reported by Julia.

Cc: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-6-git-send-email-daniel.vetter@ffwll.ch

drm: Move master functions into drm_auth.c

For modern drivers pretty much the only thing drm_master does is
handling authentication for the primary/legacy drm_minor node. Instead
of having it all over drm files, move it all together into drm_auth.c.

This patch just does code-motion, follow up patches will also extract
the master logic from file open&release paths.

Reviewed-by: Chris Wilson Mchris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-5-git-send-email-daniel.vetter@ffwll.ch

drm: Link directly from drm_master to drm_device

Master-based auth only exists for the legacy/primary drm_minor, hence
there can only be one per device. The goal here is to untangle the
epic dereference games of minor->master and master->minor which is
just massively confusing.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-4-git-send-email-daniel.vetter@ffwll.ch

drm: Hide hw.lock cleanup in filp->release better

A few things:
- Rename the cleanup function from drm_master_release to
  drm_legacy_lock_release. It doesn't relase any master stuff, but
  just the legacy hw lock.
- Hide it in drm_lock.c, which allows us to make a few more functions
  static in there. To avoid forward decl we need to shuffle the code a
  bit though.
- Push the check for ->master into the function itself.
- Only call this for !DRIVER_MODESET.

End result: Another place that takes struct_mutex gone for good for
modern drivers.

v2: Remove leftover comment.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-3-git-send-email-daniel.vetter@ffwll.ch

drm: Nuke legacy maps debugfs files

GEM stopped using those a while ago, and no one should ever
need to use them again to debug legacy horror show drivers.

Nuke it all. Aside: It would kinda be nice if we'd have some
generic debugfs dumps for at least kms ...

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-2-git-send-email-daniel.vetter@ffwll.ch

Merge tag 'topic/drm-misc-2016-06-15' of git://anongit.freedesktop.org/drm-intel into drm-next

- best_encoder cleanup from Boris.
- drm_simple_display_pipe helpers from Noralf. Looks really neat imo, and
  there's 2-3 in-flight drivers which look like they could/should use it.
  Anyway, with this we have now helpers and everything in place to write
  drivers for simple hw with fewer complexity in the driver than what
  fbdev would need. That was the last complaint I've heard from embedded
  folks after we made atomic happen. Mission accomplished!
- nonblocking commit helpers for atomic, plus a bunch of driver patches
  for that.
- Prep patch from Laurent for cleaned up pixel format functions.
- More of Gustavo's cleanup for drm vblank functions.
- and a few oddball things in between

Plus the merge of docs-next to prep the docbook->sphinx conversion as
discussed. Jon cc'ed as fyi.

* tag 'topic/drm-misc-2016-06-15' of git://anongit.freedesktop.org/drm-intel: (108 commits)
  drm/atomic-helpers: Clear up cleanup_done a bit
  drm/atomic-helpers: Stall on the right commit
  drm/vmwgfx: use *_32_bits() macros
  drm/virtio: Don't reinvent a flipping wheel
  drm/i915: Fix missing unlock on error in i915_ppgtt_info()
  drm/gma500: use drm_crtc_vblank_{on,off}()
  drm/radeon: use crtc directly in drm_crtc_vblank_put()
  drm/amdgpu: use crtc directly in drm_crtc_vblank_put()
  drm/radeon: use drm_crtc_vblank_{on,off}()
  drm/amdgpu: use drm_crtc_vblank_{on,off}()
  drm: make drm_vblank_{get,put}() static
  drm: remove legacy drm_arm_vblank_event()
  drm: remove legacy drm_send_vblank_event()
  drm/nouveau: replace legacy vblank helpers
  drm/prime: fix error path deadlock fail
  drm/dsi: Add uevent callback
  drm: fb: cma: fix memory leak
  drm: i915: Rely on the default ->best_encoder() behavior where appropriate
  drm: Add helper for simple display pipeline
  drm/bridge: dw-hdmi: Use drm_atomic_helper_best_encoder()
  ...

drm/atomic-helpers: Clear up cleanup_done a bit

It's not obvious at first sight that this is a fastpath, make that
clearer with a goto. Fallout from a discussion with Liviu on irc.

v2: Drop bogus hunks that crept in.

v3: Make it compile.

Cc: Liviu.Dudau@arm.com
Acked-by: Liviu.Dudau@arm.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465986266-2831-1-git-send-email-daniel.vetter@ffwll.ch

drm/atomic-helpers: Stall on the right commit

stall_checks carefully picked out the right commit to stall on, then
promptly used the wrong variable. Due to the break in the next loop
iteration this could be the 3rd commit, or if the list only has 2
entries commit would now point into the struct drm_crtc itself, at
some offset. Hilarity eventually ensues.

For added safety, also break right away instead of iterating once
more, but the real fix is waiting on stall_commit instead of commit.

Reported-and-tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465926658-10110-1-git-send-email-daniel.vetter@ffwll.ch

drm/vmwgfx: use *_32_bits() macros

Use the upper_32_bits() macro instead of the four line equivalent that
triggers a GCC warning on 32 bits x86:
    drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c: In function 'vmw_cmdbuf_header_submit':
    drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c:297:25: warning: right shift count >= width of type [-Wshift-count-overflow]
       val = (header->handle >> 32);
                             ^

And use the lower_32_bits() macro instead of and-ing with a 32 bits
mask.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1457000770-2317-1-git-send-email-pebolle@tiscali.nl

Merge tag 'sphinx-4.8' of git://git.lwn.net/linux into topic/drm-misc

Stable tag for sphinx work

Pull current state of the sphinx rework from Jonathan into drm-misc so
that we can start converting gpu.tmpl.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/virtio: Don't reinvent a flipping wheel

Now that the core helpers support nonblocking atomic commits there's
no need to invent that wheel separately (instead of fixing the bug in
the atomic implementation of virtio, as it should have been done!).

v2: Rebased on top of

commit e7cf0963f816fa44190caaf51aeffaa614c340c6
Author: Gerd Hoffmann <kraxel@redhat.com>
Date:   Tue May 31 08:50:47 2016 +0200

virtio-gpu: add atomic_commit function

Cc: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465510073-20951-1-git-send-email-daniel.vetter@ffwll.ch

drm/i915: Fix missing unlock on error in i915_ppgtt_info()

Add the missing unlock before return from function i915_ppgtt_info()
in the error handling case.

Fixes: 1d2ac403ae3b(drm: Protect dev->filelist with its own mutex)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465861320-26221-1-git-send-email-weiyj_lk@163.com

Merge branch 'topic-arcpgu-sim' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next

Add support for arcgpu on the sim platform.

* 'topic-arcpgu-sim' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
  ARC: [nsimosci] Enable ARC PGU on nSIM OSCI virtual platforms
  ARCv2: [vdk] Enable ARC PGU on HS38 VDK
  drm/arcpgu: Make ARC PGU usable on simulation platforms

drm/gma500: use drm_crtc_vblank_{on,off}()

Replace the legacy drm_vblank_{on,off}() with the new helper functions.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-7-git-send-email-gustavo@padovan.org

drm/radeon: use crtc directly in drm_crtc_vblank_put()

We don't need to use &radeon_crtc->base there as crtc is available
in the function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-10-git-send-email-gustavo@padovan.org

drm/amdgpu: use crtc directly in drm_crtc_vblank_put()

We don't need to use &amdgpu_crtc->base there as crtc is available
in the function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-9-git-send-email-gustavo@padovan.org

drm/radeon: use drm_crtc_vblank_{on,off}()

Replace the legacy drm_vblank_{on,off}() with the new helper functions.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-8-git-send-email-gustavo@padovan.org

drm/amdgpu: use drm_crtc_vblank_{on,off}()

Replace the legacy drm_vblank_{on,off}() with the new helper functions.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-6-git-send-email-gustavo@padovan.org

drm: make drm_vblank_{get,put}() static

As they are not used anywhere outside drm_irq.c make them static.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-4-git-send-email-gustavo@padovan.org

drm: remove legacy drm_arm_vblank_event()

We don't have any user of this function anymore, let's remove it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-3-git-send-email-gustavo@padovan.org

drm: remove legacy drm_send_vblank_event()

We don't have any user of this function anymore, let's remove it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-2-git-send-email-gustavo@padovan.org

drm/nouveau: replace legacy vblank helpers

Replace the legacy drm_send_vblank_event(), drm_arm_vblank_event() and
drm_vblank_{get,put}() with the new helper functions.

v2: add crtc to nouveau_page_flip_state (comment from Mario Kleiner)

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-1-git-send-email-gustavo@padovan.org

ARC: [nsimosci] Enable ARC PGU on nSIM OSCI virtual platforms

With required ARC PGU updates that allow it to be used on simulation
platforms we may finally utilize ARC PGU in nSIM OSCI virtual platforms
with modern Linux kernels.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

ARCv2: [vdk] Enable ARC PGU on HS38 VDK

With required ARC PGU updates that allow it to be used on simulation
platforms we may finally utilize ARC PGU in HS38 VDK with modern
Linux kernels.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

drm/arcpgu: Make ARC PGU usable on simulation platforms

In case of simulation there's no real encoder/transmitter device
because in the model's virtual LCD  we're rendering whatever
appears in frame-buffer memory.

Signed-off-by: Ruud Derwig <rderwig@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/prime: fix error path deadlock fail

There were a couple messed up things about this fail path.
(1) it would drop object_name_lock twice
(2) drm_gem_handle_delete() (in drm_gem_remove_prime_handles())
    needs to grab prime_lock

Reported-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465500559-17873-1-git-send-email-robdclark@gmail.com

drm/dsi: Add uevent callback

Implement a uevent callback for devices on the MIPI DSI bus. This
callback will append MODALIAS information to the uevent and allow
modules to be loaded when devices are added to the bus.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm: fb: cma: fix memory leak

We may have a situation that the memory allocation for fbdefio fails
and then the allocation for fbops may succeed as some memory has been
freed somewhere. Lets free fbops also to face these rare situtation.
Since kfree can handle arguments as NULL, there should not be any
problem in calling both the kfree().

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Fixes: 199c77179c87 ("drm/fb-cma-helper: Add fb_deferred_io support")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465743836-6228-1-git-send-email-sudipm.mukherjee@gmail.com

drm: i915: Rely on the default ->best_encoder() behavior where appropriate

For all outputs except dp_mst, we have a 1:1 relationship between
connectors and encoders and the driver is relying on the atomic helpers:
we can drop the custom ->best_encoder() implementation and let the core
call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-7-git-send-email-boris.brezillon@free-electrons.com

drm: Add helper for simple display pipeline

Provides helper functions for drivers that have a simple display
pipeline. Plane, crtc and encoder are collapsed into one entity.

Changes since v4:
- Remove drm_connector_register() call
- Forgot to assign pipe->connector

Changes since v3:
- (struct drm_simple_display_pipe *)->funcs should be const

Changes since v2:
- Drop Kconfig knob DRM_KMS_HELPER
- Expand documentation

Changes since v1:
- Add DOC header and add to gpu.tmpl
- Fix docs: @funcs is optional, "negative error code",
  "This hook is optional."
- Add checks to drm_simple_kms_plane_atomic_check()

Cc: jsarha@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465570559-14238-1-git-send-email-noralf@tronnes.org

drm/bridge: dw-hdmi: Use drm_atomic_helper_best_encoder()

We have a 1:1 relationship between connectors and encoders, which means
we can rely on the drm_atomic_helper_best_encoder() behavior.

We still have to explicitly assign ->best_encoder() to
drm_atomic_helper_best_encoder(), because the automated fallback to
drm_atomic_helper_best_encoder() when ->best_encoder() is NULL is only
available when the DRM device is using the atomic helpers, and this bridge
is compatible with non-atomic and atomic devices.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-21-git-send-email-boris.brezillon@free-electrons.com

drm/bridge: ps8622: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders, and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder(),
and let the core call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-20-git-send-email-boris.brezillon@free-electrons.com

drm/bridge: ptn3460: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders, and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder(),
and let the core call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-19-git-send-email-boris.brezillon@free-electrons.com

drm/bridge: anx78xx: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders, and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder(),
and let the core call drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-18-git-send-email-boris.brezillon@free-electrons.com

drm: omap: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-17-git-send-email-boris.brezillon@free-electrons.com

drm: virtgpu: Rely on the default ->best_encoder() behavior

The virtgpu output exposes a 1:1 relationship between connectors and
encoders and the driver is relying on the atomic helpers: we can drop
the custom ->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-16-git-send-email-boris.brezillon@free-electrons.com

drm: vc4: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders and
the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-15-git-send-email-boris.brezillon@free-electrons.com

drm: tegra: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-14-git-send-email-boris.brezillon@free-electrons.com

drm: sun4i: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-13-git-send-email-boris.brezillon@free-electrons.com

drm: rockchip: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations  and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-11-git-send-email-boris.brezillon@free-electrons.com
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-12-git-send-email-boris.brezillon@free-electrons.com

drm: rcar-du: Rely on the default ->best_encoder() behavior

All outputs have a 1:1 relationship between connectors and encoders,
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-10-git-send-email-boris.brezillon@free-electrons.com

drm: fsl-dcu: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-6-git-send-email-boris.brezillon@free-electrons.com

drm: exynos: Rely on the default ->best_encoder() behavior

We have 1:1 relationship between connectors and encoders and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder()
implementations and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-5-git-send-email-boris.brezillon@free-electrons.com

drm: atmel-hlcdc: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-4-git-send-email-boris.brezillon@free-electrons.com

drm: arc: Rely on the default ->best_encoder() behavior

We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder(), and let the core call drm_atomic_helper_best_encoder()
for us.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-3-git-send-email-boris.brezillon@free-electrons.com

drm: Fix comment making reference to non-existing function

Documentation for drm_atomic_crtc_for_each_plane() makes reference to
a function called drm_crtc_for_each_pending_plane(). I've guessed that
the actual function name is drm_atomic_crtc_state_for_each_plane() as
that matches best the intent of the comment.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465571005-3877-1-git-send-email-Liviu.Dudau@arm.com

drm/rockchip: Resume DP early

The DP needs to have resumed once the DRM driver calls
drm_atomic_helper_resume, otherwise the DP clock is still disabled when
the DRM core enables the DP bridge.

Would be nice to use device_pm_wait_for_dev to synchronize these
devices, but the DRM device doesn't know what specific implementation
this bridge has.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Caesar Wang <wxt@rock-chips.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224813-7359-2-git-send-email-tomeu.vizoso@collabora.com

drm/rockchip: Use atomic PM helpers

This driver was still using the old legacy helpers and that caused a few
NULL dereferences when trying to call empty callbacks.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Caesar Wang <wxt@rock-chips.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224813-7359-1-git-send-email-tomeu.vizoso@collabora.com

drm/rockchip: Nuke pending event handling in preclose

This is now handled by the core, drivers can totally ignore lifetime
issues of drm events.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-11-git-send-email-daniel.vetter@ffwll.ch

drm/rockchip: convert to helper nonblocking atomic commit

With the various bits fixed rockchip now has an atomic compliant
handling/signalling of crtc_state->event, which means we can just
switch over to the new nonblocking helpers and remove some code.

v2: Fixes from Tomeu.

v3: Send out vblank events correctly when shutting down a crtc for
good. This is part of the atomic interface contract.

v4: Properly protect vop->event.

v5: Add more WARN_ON to check vop->event isn't clobbered.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/rockchip: Fix crtc_state->event signalling

It's not permissible to look at plane->state from interrupt context,
since doing that would need the irq handler to acquire the
plane->mutex lock.

The other problem is that if we pipeline updates using the new
nonblocking atomic helpers new state gets commit before the irq
handler fires, resulting in a lost event.

Fix both issues by caching the necessary values in vop_win, protected
by dev->event_lock.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-19-git-send-email-daniel.vetter@ffwll.ch

drm/rockchip: Disarm vop->is_enabled

With atomic helpers there's no need to track the enabled state of a pipe
any more, because atomic helpers track this accurately already.

Just disable the early returns, since the debug checks might be useful.

v2: Don't call drm_helper_disable_unused_functions, it blows up
without this check. At least explains why rockchip still needed this
old legacy-style state tracing - to work around issues from calling
other legacy style functions!

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-18-git-send-email-daniel.vetter@ffwll.ch