From 02a54164c52ed6eca3089a0d402170fbf34d6cf5 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Thu, 22 Jan 2015 15:19:22 +0530 Subject: [PATCH] drivers: net: cpsw: discard dual emac default vlan configuration In Dual EMAC, the default VLANs are used to segregate Rx packets between the ports, so adding the same default VLAN to the switch will affect the normal packet transfers. So returning error on addition of dual EMAC default VLANs. Even if EMAC 0 default port VLAN is added to EMAC 1, it will lead to break dual EMAC port separations. Fixes: d9ba8f9e6298 (driver: net: ethernet: cpsw: dual emac interface implementation) Cc: # v3.9+ Reported-by: Felipe Balbi Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e068d48b0f21..a39131f494ec 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1683,6 +1683,19 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev, if (vid == priv->data.default_vlan) return 0; + if (priv->data.dual_emac) { + /* In dual EMAC, reserved VLAN id should not be used for + * creating VLAN interfaces as this can break the dual + * EMAC port separation + */ + int i; + + for (i = 0; i < priv->data.slaves; i++) { + if (vid == priv->slaves[i].port_vlan) + return -EINVAL; + } + } + dev_info(priv->dev, "Adding vlanid %d to vlan filter\n", vid); return cpsw_add_vlan_ale_entry(priv, vid); } @@ -1696,6 +1709,15 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev, if (vid == priv->data.default_vlan) return 0; + if (priv->data.dual_emac) { + int i; + + for (i = 0; i < priv->data.slaves; i++) { + if (vid == priv->slaves[i].port_vlan) + return -EINVAL; + } + } + dev_info(priv->dev, "removing vlanid %d from vlan filter\n", vid); ret = cpsw_ale_del_vlan(priv->ale, vid, 0); if (ret != 0) -- 2.20.1