From 31c128b66e5b28f468076e4f3ca3025c35342041 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Wed, 17 Feb 2016 17:24:23 +0200 Subject: [PATCH] net/mlx4_en: Choose time-stamping shift value according to HW frequency Previously, the shift value used for time-stamping was constant and didn't depend on the HW chip frequency. Change that to take the frequency into account and calculate the maximal value in cycles per wraparound of ten seconds. This time slot was chosen since it gives a good accuracy in time synchronization. Algorithm for shift value calculation: * Round up the maximal value in cycles to nearest power of two * Calculate maximal multiplier by division of all 64 bits set to above result * Then, invert the function clocksource_khz2mult() to get the shift from maximal mult value Fixes: ec693d47010e ('net/mlx4_en: Add HW timestamping (TS) support') Signed-off-by: Eugenia Emantayev Reviewed-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_clock.c | 25 ++++++++++++++----- 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c index 038f9ce391e6..1494997c4f7e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c @@ -236,6 +236,24 @@ static const struct ptp_clock_info mlx4_en_ptp_clock_info = { .enable = mlx4_en_phc_enable, }; +#define MLX4_EN_WRAP_AROUND_SEC 10ULL + +/* This function calculates the max shift that enables the user range + * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register. + */ +static u32 freq_to_shift(u16 freq) +{ + u32 freq_khz = freq * 1000; + u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC; + u64 max_val_cycles_rounded = is_power_of_2(max_val_cycles + 1) ? + max_val_cycles : roundup_pow_of_two(max_val_cycles) - 1; + /* calculate max possible multiplier in order to fit in 64bit */ + u64 max_mul = div_u64(0xffffffffffffffffULL, max_val_cycles_rounded); + + /* This comes from the reverse of clocksource_khz2mult */ + return ilog2(div_u64(max_mul * freq_khz, 1000000)); +} + void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) { struct mlx4_dev *dev = mdev->dev; @@ -254,12 +272,7 @@ void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) memset(&mdev->cycles, 0, sizeof(mdev->cycles)); mdev->cycles.read = mlx4_en_read_clock; mdev->cycles.mask = CLOCKSOURCE_MASK(48); - /* Using shift to make calculation more accurate. Since current HW - * clock frequency is 427 MHz, and cycles are given using a 48 bits - * register, the biggest shift when calculating using u64, is 14 - * (max_cycles * multiplier < 2^64) - */ - mdev->cycles.shift = 14; + mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock); mdev->cycles.mult = clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift); mdev->nominal_c_mult = mdev->cycles.mult; -- 2.20.1