From ac5ce09e140c0238a8fb61d1c198ce9945e8be47 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 16 Jul 2014 02:38:39 +0900 Subject: [PATCH] ARM: dts: Add mask-tpm-reset node in exynos5420-peach-pit The mask-tpm-reset GPIO is used by the kernel to prevent the TPM from being reset across sleep/wake. If we don't set it to anything then the TPM will be reset. U-Boot will detect this as invalid and will reset the system on resume time. This GPIO can always be low and not hurt anything. It will get pulled back high again during a normal warm reset when it will default back to an input. To properly preserve the TPM state across suspend/resume and to make the chrome U-Boot happy, properly set the GPIO to mask the reset to the TPM. Signed-off-by: Doug Anderson Signed-off-by: Vikas Sajjan Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 6c7cab0eba25..c7b2bbae71a9 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -211,6 +211,9 @@ &pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&mask_tpm_reset>; + max98090_irq: max98090-irq { samsung,pins = "gpx0-2"; samsung,pin-function = <0>; @@ -218,6 +221,15 @@ samsung,pin-drv = <0>; }; + /* We need GPX0_6 to be low at sleep time; just keep it low always */ + mask_tpm_reset: mask-tpm-reset { + samsung,pins = "gpx0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <0>; + }; + tpm_irq: tpm-irq { samsung,pins = "gpx1-0"; samsung,pin-function = <0>; -- 2.20.1