From e13dbead976d79968bd616b924f300cdaf15f852 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Sep 2016 21:56:21 +0300 Subject: [PATCH] ath10k: spelling and miscellaneous neatening Correct some trivial comment typos. Remove unnecessary parentheses in a long line. Signed-off-by: Joe Perches [kvalo@qca.qualcomm.com: drop the change for return] Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/ce.c | 2 +- drivers/net/wireless/ath/ath10k/htt.h | 8 +++---- drivers/net/wireless/ath/ath10k/hw.c | 2 +- drivers/net/wireless/ath/ath10k/hw.h | 2 +- drivers/net/wireless/ath/ath10k/targaddrs.h | 2 +- drivers/net/wireless/ath/ath10k/wmi.h | 24 ++++++++++----------- 6 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 65d8d714e917..e7205546fa6b 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -39,7 +39,7 @@ * chooses what to send (buffer address, length). The destination * side keeps a supply of "anonymous receive buffers" available and * it handles incoming data as it arrives (when the destination - * recieves an interrupt). + * receives an interrupt). * * The sender may send a simple buffer (address/length) or it may * send a small list of buffers. When a small list is sent, hardware diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h index 98c14247021b..0d2ed09f202b 100644 --- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h @@ -595,7 +595,7 @@ enum htt_rx_mpdu_status { /* only accept EAPOL frames */ HTT_RX_IND_MPDU_STATUS_UNAUTH_PEER, HTT_RX_IND_MPDU_STATUS_OUT_OF_SYNC, - /* Non-data in promiscous mode */ + /* Non-data in promiscuous mode */ HTT_RX_IND_MPDU_STATUS_MGMT_CTRL, HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR, HTT_RX_IND_MPDU_STATUS_DECRYPT_ERR, @@ -900,7 +900,7 @@ struct htt_rx_in_ord_ind { * Purpose: indicate how many 32-bit integers follow the message header * - NUM_CHARS * Bits 31:16 - * Purpose: indicate how many 8-bit charaters follow the series of integers + * Purpose: indicate how many 8-bit characters follow the series of integers */ struct htt_rx_test { u8 num_ints; @@ -1042,10 +1042,10 @@ struct htt_dbg_stats_wal_tx_stats { /* illegal rate phy errors */ __le32 illgl_rate_phy_err; - /* wal pdev continous xretry */ + /* wal pdev continuous xretry */ __le32 pdev_cont_xretry; - /* wal pdev continous xretry */ + /* wal pdev continuous xretry */ __le32 pdev_tx_timeout; /* wal pdev resets */ diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c index c2ecb9bd824a..675e75d66db2 100644 --- a/drivers/net/wireless/ath/ath10k/hw.c +++ b/drivers/net/wireless/ath/ath10k/hw.c @@ -85,7 +85,7 @@ const struct ath10k_hw_regs qca99x0_regs = { .ce7_base_address = 0x0004bc00, /* Note: qca99x0 supports upto 12 Copy Engines. Other than address of * CE0 and CE1 no other copy engine is directly referred in the code. - * It is not really neccessary to assign address for newly supported + * It is not really necessary to assign address for newly supported * CEs in this address table. * Copy Engine Address * CE8 0x0004c000 diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 308e423d4b99..4a01bcff49a7 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -284,7 +284,7 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, #define QCA_REV_9377(ar) ((ar)->hw_rev == ATH10K_HW_QCA9377) #define QCA_REV_40XX(ar) ((ar)->hw_rev == ATH10K_HW_QCA4019) -/* Known pecularities: +/* Known peculiarities: * - raw appears in nwifi decap, raw and nwifi appear in ethernet decap * - raw have FCS, nwifi doesn't * - ethernet frames have 802.11 header decapped and parts (base hdr, cipher diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h index aaf53a81e78b..a47cab44d9c8 100644 --- a/drivers/net/wireless/ath/ath10k/targaddrs.h +++ b/drivers/net/wireless/ath/ath10k/targaddrs.h @@ -405,7 +405,7 @@ Fw Mode/SubMode Mask * 1. target firmware would check magic number and if it's a match, firmware * would consider the bits[0:15] are valid and base on that to calculate * the end of DRAM. Early allocation would be located at that area and - * may be reclaimed when necesary + * may be reclaimed when necessary * 2. if no magic number is found, early allocation would happen at "_end" * symbol of ROM which is located before the app-data and might NOT be * re-claimable. If this is adopted, link script should keep this in diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 48e04b92e231..6a68817b90b8 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -55,7 +55,7 @@ * type. * * 6. Comment each parameter part of the WMI command/event structure by - * using the 2 stars at the begining of C comment instead of one star to + * using the 2 stars at the beginning of C comment instead of one star to * enable HTML document generation using Doxygen. * */ @@ -2087,7 +2087,7 @@ struct wmi_resource_config { * In offload mode target supports features like WOW, chatter and * other protocol offloads. In order to support them some * functionalities like reorder buffering, PN checking need to be - * done in target. This determines maximum number of peers suported + * done in target. This determines maximum number of peers supported * by target in offload mode */ __le32 num_offload_peers; @@ -2268,7 +2268,7 @@ struct wmi_resource_config { * Max. number of Tx fragments per MSDU * This parameter controls the max number of Tx fragments per MSDU. * This is sent by the target as part of the WMI_SERVICE_READY event - * and is overriden by the OS shim as required. + * and is overridden by the OS shim as required. */ __le32 max_frag_entries; } __packed; @@ -2450,7 +2450,7 @@ struct wmi_resource_config_10x { * Max. number of Tx fragments per MSDU * This parameter controls the max number of Tx fragments per MSDU. * This is sent by the target as part of the WMI_SERVICE_READY event - * and is overriden by the OS shim as required. + * and is overridden by the OS shim as required. */ __le32 max_frag_entries; } __packed; @@ -2744,7 +2744,7 @@ struct wmi_init_cmd { struct wmi_host_mem_chunks mem_chunks; } __packed; -/* _10x stucture is from 10.X FW API */ +/* _10x structure is from 10.X FW API */ struct wmi_init_cmd_10x { struct wmi_resource_config_10x resource_config; struct wmi_host_mem_chunks mem_chunks; @@ -3967,7 +3967,7 @@ struct wmi_pdev_stats_tx { /* illegal rate phy errors */ __le32 illgl_rate_phy_err; - /* wal pdev continous xretry */ + /* wal pdev continuous xretry */ __le32 pdev_cont_xretry; /* wal pdev continous xretry */ @@ -4461,9 +4461,9 @@ struct wmi_vdev_start_request_cmd { __le32 flags; /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ struct wmi_ssid ssid; - /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ + /* beacon/probe response xmit rate. Applicable for SoftAP. */ __le32 bcn_tx_rate; - /* beacon/probe reponse xmit power. Applicable for SoftAP. */ + /* beacon/probe response xmit power. Applicable for SoftAP. */ __le32 bcn_tx_power; /* number of p2p NOA descriptor(s) from scan entry */ __le32 num_noa_descriptors; @@ -4691,7 +4691,7 @@ enum wmi_vdev_param { WMI_VDEV_PARAM_BEACON_INTERVAL, /* Listen interval in TUs */ WMI_VDEV_PARAM_LISTEN_INTERVAL, - /* muticast rate in Mbps */ + /* multicast rate in Mbps */ WMI_VDEV_PARAM_MULTICAST_RATE, /* management frame rate in Mbps */ WMI_VDEV_PARAM_MGMT_TX_RATE, @@ -4822,7 +4822,7 @@ enum wmi_10x_vdev_param { WMI_10X_VDEV_PARAM_BEACON_INTERVAL, /* Listen interval in TUs */ WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, - /* muticast rate in Mbps */ + /* multicast rate in Mbps */ WMI_10X_VDEV_PARAM_MULTICAST_RATE, /* management frame rate in Mbps */ WMI_10X_VDEV_PARAM_MGMT_TX_RATE, @@ -5067,7 +5067,7 @@ struct wmi_vdev_simple_event { } __packed; /* VDEV start response status codes */ -/* VDEV succesfully started */ +/* VDEV successfully started */ #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 /* requested VDEV not found */ @@ -5383,7 +5383,7 @@ enum wmi_sta_ps_param_pspoll_count { #define WMI_UAPSD_AC_TYPE_TRIG 1 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ - ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1 << (ac << 1)) : (1 << ((ac << 1) + 1))) + (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) enum wmi_sta_ps_param_uapsd { WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), -- 2.20.1