From f00e756ed12d3204583764c93e41b89e1ae7ee44 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 19 Mar 2014 16:15:23 -0600 Subject: [PATCH] dt: Document a compatible entry for MDIO ethernet Phys This describes a compatible entry of the form: ethernet-phy-idAAAA,BBBB Which is modelled after the PCI structured compatible entry (pciVVVV,DDDD.SSSS.ssss.RR) If present the OF core will be able to use this information to directly create the correct phy without auto probing the bus. Signed-off-by: Jason Gunthorpe Acked-by: Rob Herring Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/phy.txt | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 58307d0931c8..5b8c58903077 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -21,10 +21,18 @@ Optional Properties: elements. - max-speed: Maximum PHY supported speed (10, 100, 1000...) + If the phy's identifier is known then the list may contain an entry + of the form: "ethernet-phy-idAAAA.BBBB" where + AAAA - The value of the 16 bit Phy Identifier 1 register as + 4 hex digits. This is the chip vendor OUI bits 3:18 + BBBB - The value of the 16 bit Phy Identifier 2 register as + 4 hex digits. This is the chip vendor OUI bits 19:24, + followed by 10 bits of a vendor specific ID. + Example: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; interrupt-parent = <40000>; interrupts = <35 1>; reg = <0>; -- 2.20.1