OFPT11_QUEUE_GET_CONFIG_REPLY, /* Controller/switch message */
};
+/* OpenFlow 1.1 port config flags are just the common flags. */
+#define OFPPC11_ALL \
+ (OFPPC_PORT_DOWN | OFPPC_NO_RECV | OFPPC_NO_FWD | OFPPC_NO_PACKET_IN)
+
+/* OpenFlow 1.1 specific current state of the physical port. These are not
+ * configurable from the controller.
+ */
+enum ofp11_port_state {
+ OFPPS11_BLOCKED = 1 << 1, /* Port is blocked */
+ OFPPS11_LIVE = 1 << 2, /* Live for Fast Failover Group. */
+#define OFPPS11_ALL (OFPPS_LINK_DOWN | OFPPS11_BLOCKED | OFPPS11_LIVE)
+};
+
+/* OpenFlow 1.1 specific features of ports available in a datapath. */
+enum ofp11_port_features {
+ OFPPF11_40GB_FD = 1 << 7, /* 40 Gb full-duplex rate support. */
+ OFPPF11_100GB_FD = 1 << 8, /* 100 Gb full-duplex rate support. */
+ OFPPF11_1TB_FD = 1 << 9, /* 1 Tb full-duplex rate support. */
+ OFPPF11_OTHER = 1 << 10, /* Other rate, not in the list. */
+
+ OFPPF11_COPPER = 1 << 11, /* Copper medium. */
+ OFPPF11_FIBER = 1 << 12, /* Fiber medium. */
+ OFPPF11_AUTONEG = 1 << 13, /* Auto-negotiation. */
+ OFPPF11_PAUSE = 1 << 14, /* Pause. */
+ OFPPF11_PAUSE_ASYM = 1 << 15 /* Asymmetric pause. */
+#define OFPPF11_ALL ((1 << 16) - 1)
+};
+
+/* Description of a port */
+struct ofp11_port {
+ ovs_be32 port_no;
+ uint8_t pad[4];
+ uint8_t hw_addr[OFP_ETH_ALEN];
+ uint8_t pad2[2]; /* Align to 64 bits. */
+ char name[OFP_MAX_PORT_NAME_LEN]; /* Null-terminated */
+
+ ovs_be32 config; /* Bitmap of OFPPC_* flags. */
+ ovs_be32 state; /* Bitmap of OFPPS_* and OFPPS11_* flags. */
+
+ /* Bitmaps of OFPPF_* and OFPPF11_* that describe features. All bits
+ * zeroed if unsupported or unavailable. */
+ ovs_be32 curr; /* Current features. */
+ ovs_be32 advertised; /* Features being advertised by the port. */
+ ovs_be32 supported; /* Features supported by the port. */
+ ovs_be32 peer; /* Features advertised by peer. */
+
+ ovs_be32 curr_speed; /* Current port bitrate in kbps. */
+ ovs_be32 max_speed; /* Max port bitrate in kbps */
+};
+
+/* Modify behavior of the physical port */
+struct ofp11_port_mod {
+ struct ofp_header header;
+ ovs_be32 port_no;
+ uint8_t pad[4];
+ uint8_t hw_addr[OFP_ETH_ALEN]; /* The hardware address is not
+ configurable. This is used to
+ sanity-check the request, so it must
+ be the same as returned in an
+ ofp11_port struct. */
+ uint8_t pad2[2]; /* Pad to 64 bits. */
+ ovs_be32 config; /* Bitmap of OFPPC_* flags. */
+ ovs_be32 mask; /* Bitmap of OFPPC_* flags to be changed. */
+
+ ovs_be32 advertise; /* Bitmap of OFPPF_* and OFPPF11_*. Zero all bits
+ to prevent any action taking place. */
+ uint8_t pad3[4]; /* Pad to 64 bits. */
+};
+OFP_ASSERT(sizeof(struct ofp11_port_mod) == 40);
+
+/* OpenFlow 1.1 specific capabilities supported by the datapath (struct
+ * ofp_switch_features, member capabilities). */
+enum ofp11_capabilities {
+ OFPC11_GROUP_STATS = 1 << 3, /* Group statistics. */
+};
+
+enum ofp11_action_type {
+ OFPAT11_OUTPUT, /* Output to switch port. */
+ OFPAT11_SET_VLAN_VID, /* Set the 802.1q VLAN id. */
+ OFPAT11_SET_VLAN_PCP, /* Set the 802.1q priority. */
+ OFPAT11_SET_DL_SRC, /* Ethernet source address. */
+ OFPAT11_SET_DL_DST, /* Ethernet destination address. */
+ OFPAT11_SET_NW_SRC, /* IP source address. */
+ OFPAT11_SET_NW_DST, /* IP destination address. */
+ OFPAT11_SET_NW_TOS, /* IP ToS (DSCP field, 6 bits). */
+ OFPAT11_SET_NW_ECN, /* IP ECN (2 bits). */
+ OFPAT11_SET_TP_SRC, /* TCP/UDP/SCTP source port. */
+ OFPAT11_SET_TP_DST, /* TCP/UDP/SCTP destination port. */
+ OFPAT11_COPY_TTL_OUT, /* Copy TTL "outwards" -- from next-to-outermost
+ to outermost */
+ OFPAT11_COPY_TTL_IN, /* Copy TTL "inwards" -- from outermost to
+ next-to-outermost */
+ OFPAT11_SET_MPLS_LABEL, /* MPLS label */
+ OFPAT11_SET_MPLS_TC, /* MPLS TC */
+ OFPAT11_SET_MPLS_TTL, /* MPLS TTL */
+ OFPAT11_DEC_MPLS_TTL, /* Decrement MPLS TTL */
+
+ OFPAT11_PUSH_VLAN, /* Push a new VLAN tag */
+ OFPAT11_POP_VLAN, /* Pop the outer VLAN tag */
+ OFPAT11_PUSH_MPLS, /* Push a new MPLS tag */
+ OFPAT11_POP_MPLS, /* Pop the outer MPLS tag */
+ OFPAT11_SET_QUEUE, /* Set queue id when outputting to a port */
+ OFPAT11_GROUP, /* Apply group. */
+ OFPAT11_SET_NW_TTL, /* IP TTL. */
+ OFPAT11_DEC_NW_TTL, /* Decrement IP TTL. */
+ OFPAT11_EXPERIMENTER = 0xffff
+};
+
#endif /* openflow/openflow-1.1.h */
projects / cascardo / ovs.git / blobdiff