Documentation/devicetree/bindings/input/elants_i2c.txt

   1 Elantech I2C Touchscreen
   2
   3 Required properties:
   4 - compatible: must be "elan,ekth3500".
   5 - reg: I2C address of the chip.
   6 - interrupt-parent: a phandle for the interrupt controller (see interrupt
   7   binding[0]).
   8 - interrupts: interrupt to which the chip is connected (see interrupt
   9   binding[0]).
  10
  11 Optional properties:
  12 - wakeup-source: touchscreen can be used as a wakeup source.
  13 - pinctrl-names: should be "default" (see pinctrl binding [1]).
  14 - pinctrl-0: a phandle pointing to the pin settings for the device (see
  15   pinctrl binding [1]).
  16
  17 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
  18 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
  19
  20 Example:
  21         &i2c1 {
  22                 /* ... */
  23
  24                 touchscreen@10 {
  25                         compatible = "elan,ekth3500";
  26                         reg = <0x10>;
  27                         interrupt-parent = <&gpio4>;
  28                         interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
  29                         wakeup-source;
  30                 };
  31
  32                 /* ... */
  33         };