Documentation/devicetree/bindings/phy/berlin-sata-phy.txt

   1 Berlin SATA PHY
   2 ---------------
   3
   4 Required properties:
   5 - compatible: should be "marvell,berlin2q-sata-phy"
   6 - address-cells: should be 1
   7 - size-cells: should be 0
   8 - phy-cells: from the generic PHY bindings, must be 1
   9 - reg: address and length of the register
  10 - clocks: reference to the clock entry
  11
  12 Sub-nodes:
  13 Each PHY should be represented as a sub-node.
  14
  15 Sub-nodes required properties:
  16 - reg: the PHY number
  17
  18 Example:
  19         sata_phy: phy@f7e900a0 {
  20                 compatible = "marvell,berlin2q-sata-phy";
  21                 reg = <0xf7e900a0 0x200>;
  22                 clocks = <&chip CLKID_SATA>;
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 #phy-cells = <1>;
  26
  27                 sata-phy@0 {
  28                         reg = <0>;
  29                 };
  30
  31                 sata-phy@1 {
  32                         reg = <1>;
  33                 };
  34         };