6 - compatible: must be "snps,dwc3"
7 - reg : Address and length of the register set for the device
8 - interrupts: Interrupts used by the dwc3 controller.
11 - usb-phy : array of phandle for the PHY device. The first element
12 in the array is expected to be a handle to the USB2/HS PHY and
13 the second element is expected to be a handle to the USB3/SS PHY
14 - phys: from the *Generic PHY* bindings
15 - phy-names: from the *Generic PHY* bindings
16 - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
17 - snps,disable_scramble_quirk: true when SW should disable data scrambling.
18 Only really useful for FPGA builds.
19 - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
20 - snps,lpm-nyet-threshold: LPM NYET threshold
21 - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
22 - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
24 This is usually a subnode to DWC3 glue to which it is connected.
27 compatible = "snps,dwc3";
28 reg = <0x4a030000 0xcfff>;
30 usb-phy = <&usb2_phy>, <&usb3,phy>;